.1.3,SNMPv2-SMI::org,,,,,,
.1.3.6,SNMPv2-SMI::dod,,,,,,
.1.3.6.1,SNMPv2-SMI::internet,,,,,,
.1.3.6.1.1,SNMPv2-SMI::directory,,,,,,
.1.3.6.1.2,SNMPv2-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,RFC1213-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,RFC1213-MIB::sysDescr,OCTET,read-only,,mandatory,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.1.2,RFC1213-MIB::sysObjectID,OBJECT,read-only,,mandatory,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,RFC1213-MIB::sysUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,RFC1213-MIB::sysContact,OCTET,read-write,,mandatory,,The textual identification of the contact person for this managed node, together with information on how to contact this person.
.1.3.6.1.2.1.1.5,RFC1213-MIB::sysName,OCTET,read-write,,mandatory,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
.1.3.6.1.2.1.1.6,RFC1213-MIB::sysLocation,OCTET,read-write,,mandatory,,The physical location of this node (e.g., `telephone closet, 3rd floor').
.1.3.6.1.2.1.1.7,RFC1213-MIB::sysServices,INTEGER,read-only,,mandatory,,A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.2,RFC1213-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,RFC1213-MIB::ifNumber,INTEGER,read-only,,mandatory,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,RFC1213-MIB::ifTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,RFC1213-MIB::ifEntry,,not-accessible,ifIndex,mandatory,,An interface entry containing objects at the subnetwork layer and below for a particular interface.
.1.3.6.1.2.1.2.2.1.1,RFC1213-MIB::ifIndex,INTEGER,read-only,,mandatory,,A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,RFC1213-MIB::ifDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
.1.3.6.1.2.1.2.2.1.3,RFC1213-MIB::ifType,INTEGER,read-only,,mandatory,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
.1.3.6.1.2.1.2.2.1.4,RFC1213-MIB::ifMtu,INTEGER,read-only,,mandatory,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,RFC1213-MIB::ifSpeed,Gauge32,read-only,,mandatory,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
.1.3.6.1.2.1.2.2.1.6,RFC1213-MIB::ifPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,RFC1213-MIB::ifAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.8,RFC1213-MIB::ifOperStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.9,RFC1213-MIB::ifLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,RFC1213-MIB::ifInOctets,Counter32,read-only,,mandatory,,The total number of octets received on the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.11,RFC1213-MIB::ifInUcastPkts,Counter32,read-only,,mandatory,,The number of subnetwork-unicast packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.12,RFC1213-MIB::ifInNUcastPkts,Counter32,read-only,,mandatory,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.13,RFC1213-MIB::ifInDiscards,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.14,RFC1213-MIB::ifInErrors,Counter32,read-only,,mandatory,,The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.15,RFC1213-MIB::ifInUnknownProtos,Counter32,read-only,,mandatory,,The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.2.2.1.16,RFC1213-MIB::ifOutOctets,Counter32,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.17,RFC1213-MIB::ifOutUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.18,RFC1213-MIB::ifOutNUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.19,RFC1213-MIB::ifOutDiscards,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.20,RFC1213-MIB::ifOutErrors,Counter32,read-only,,mandatory,,The number of outbound packets that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.21,RFC1213-MIB::ifOutQLen,Gauge32,read-only,,mandatory,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,RFC1213-MIB::ifSpecific,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.11,RFC1213-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,RFC1213-MIB::snmpInPkts,Counter32,read-only,,mandatory,,The total number of Messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,RFC1213-MIB::snmpOutPkts,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,RFC1213-MIB::snmpInBadVersions,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,RFC1213-MIB::snmpInBadCommunityNames,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
.1.3.6.1.2.1.11.5,RFC1213-MIB::snmpInBadCommunityUses,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
.1.3.6.1.2.1.11.6,RFC1213-MIB::snmpInASNParseErrs,Counter32,read-only,,mandatory,,The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
.1.3.6.1.2.1.11.8,RFC1213-MIB::snmpInTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
.1.3.6.1.2.1.11.9,RFC1213-MIB::snmpInNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
.1.3.6.1.2.1.11.10,RFC1213-MIB::snmpInBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.11,RFC1213-MIB::snmpInReadOnlys,Counter32,read-only,,mandatory,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,RFC1213-MIB::snmpInGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.13,RFC1213-MIB::snmpInTotalReqVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,RFC1213-MIB::snmpInTotalSetVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,RFC1213-MIB::snmpInGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,RFC1213-MIB::snmpInGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,RFC1213-MIB::snmpInSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,RFC1213-MIB::snmpInGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,RFC1213-MIB::snmpInTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,RFC1213-MIB::snmpOutTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
.1.3.6.1.2.1.11.21,RFC1213-MIB::snmpOutNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
.1.3.6.1.2.1.11.22,RFC1213-MIB::snmpOutBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.24,RFC1213-MIB::snmpOutGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.25,RFC1213-MIB::snmpOutGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,RFC1213-MIB::snmpOutGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,RFC1213-MIB::snmpOutSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,RFC1213-MIB::snmpOutGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,RFC1213-MIB::snmpOutTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,RFC1213-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.3,SNMPv2-SMI::experimental,,,,,,
.1.3.6.1.4,SNMPv2-SMI::private,,,,,,
.1.3.6.1.4.1,SNMPv2-SMI::enterprises,,,,,,
.1.3.6.1.4.1.3224,NETSCREEN-SMI::netscreen,,,,,,
.1.3.6.1.4.1.3224.0,NETSCREEN-SMI::netscreenTrap,,,,,,
.1.3.6.1.4.1.3224.1,NETSCREEN-SMI::netscreenProducts,,,,,,
.1.3.6.1.4.1.3224.1.0,NETSCREEN-PRODUCTS-MIB::netscreenProductsMibModule,,,,,,This module defines the object identifiers that are assigned to various hardware platforms, and hence are returned as values for sysObjectID
.1.3.6.1.4.1.3224.1.1,NETSCREEN-PRODUCTS-MIB::netscreenGeneric,,,,,,
.1.3.6.1.4.1.3224.1.2,NETSCREEN-PRODUCTS-MIB::netscreenNs5,,,,,,
.1.3.6.1.4.1.3224.1.3,NETSCREEN-PRODUCTS-MIB::netscreenNs10,,,,,,
.1.3.6.1.4.1.3224.1.4,NETSCREEN-PRODUCTS-MIB::netscreenNs100,,,,,,
.1.3.6.1.4.1.3224.1.5,NETSCREEN-PRODUCTS-MIB::netscreenNs1000,,,,,,
.1.3.6.1.4.1.3224.1.6,NETSCREEN-PRODUCTS-MIB::netscreenNs500,,,,,,
.1.3.6.1.4.1.3224.1.7,NETSCREEN-PRODUCTS-MIB::netscreenNs50,,,,,,
.1.3.6.1.4.1.3224.1.8,NETSCREEN-PRODUCTS-MIB::netscreenNs25,,,,,,
.1.3.6.1.4.1.3224.1.9,NETSCREEN-PRODUCTS-MIB::netscreenNs204,,,,,,
.1.3.6.1.4.1.3224.1.10,NETSCREEN-PRODUCTS-MIB::netscreenNs208,,,,,,
.1.3.6.1.4.1.3224.1.11,NETSCREEN-PRODUCTS-MIB::netscreenNs5XT,,,,,,
.1.3.6.1.4.1.3224.1.12,NETSCREEN-PRODUCTS-MIB::netscreenNs5XP,,,,,,
.1.3.6.1.4.1.3224.1.13,NETSCREEN-PRODUCTS-MIB::netscreenNs5000,,,,,,
.1.3.6.1.4.1.3224.1.14,NETSCREEN-PRODUCTS-MIB::netscreenNs5GT,,,,,,
.1.3.6.1.4.1.3224.1.15,NETSCREEN-PRODUCTS-MIB::netscreenHardwareSecurityClient,,,,,,
.1.3.6.1.4.1.3224.1.16,NETSCREEN-PRODUCTS-MIB::netscreenISG2000,,,,,,
.1.3.6.1.4.1.3224.1.17,NETSCREEN-PRODUCTS-MIB::netscreen-5GT-ADSL-AnnexA,,,,,,
.1.3.6.1.4.1.3224.1.19,NETSCREEN-PRODUCTS-MIB::netscreen-5GT-ADSL-AnnexB,,,,,,
.1.3.6.1.4.1.3224.1.21,NETSCREEN-PRODUCTS-MIB::netscreen-5GT-WLAN,,,,,,
.1.3.6.1.4.1.3224.1.23,NETSCREEN-PRODUCTS-MIB::netscreen-5GT-ADSL-AnnexA-WLAN,,,,,,
.1.3.6.1.4.1.3224.1.25,NETSCREEN-PRODUCTS-MIB::netscreen-5GT-ADSL-AnnexB-WLAN,,,,,,
.1.3.6.1.4.1.3224.1.28,NETSCREEN-PRODUCTS-MIB::netscreenISG1000,,,,,,
.1.3.6.1.4.1.3224.1.29,NETSCREEN-PRODUCTS-MIB::netscreenSSG5,,,,,,
.1.3.6.1.4.1.3224.1.30,NETSCREEN-PRODUCTS-MIB::netscreenSSG5-ISDN,,,,,,
.1.3.6.1.4.1.3224.1.31,NETSCREEN-PRODUCTS-MIB::netscreenSSG5-v92,,,,,,
.1.3.6.1.4.1.3224.1.32,NETSCREEN-PRODUCTS-MIB::netscreenSSG5-Serial-WLAN,,,,,,
.1.3.6.1.4.1.3224.1.33,NETSCREEN-PRODUCTS-MIB::netscreenSSG5-ISDN-WLAN,,,,,,
.1.3.6.1.4.1.3224.1.34,NETSCREEN-PRODUCTS-MIB::netscreenSSG5-v92-WLAN,,,,,,
.1.3.6.1.4.1.3224.1.35,NETSCREEN-PRODUCTS-MIB::netscreenSSG20,,,,,,
.1.3.6.1.4.1.3224.1.36,NETSCREEN-PRODUCTS-MIB::netscreenSSG20-WLAN,,,,,,
.1.3.6.1.4.1.3224.1.50,NETSCREEN-PRODUCTS-MIB::netscreenSSG520,,,,,,
.1.3.6.1.4.1.3224.1.51,NETSCREEN-PRODUCTS-MIB::netscreenSSG550,,,,,,
.1.3.6.1.4.1.3224.1.52,NETSCREEN-PRODUCTS-MIB::netscreenSSG140,,,,,,
.1.3.6.1.4.1.3224.1.54,NETSCREEN-PRODUCTS-MIB::netscreenSSG320,,,,,,
.1.3.6.1.4.1.3224.1.55,NETSCREEN-PRODUCTS-MIB::netscreenSSG350,,,,,,
.1.3.6.1.4.1.3224.2,NETSCREEN-SMI::netscreenTrapInfo,,,,,,
.1.3.6.1.4.1.3224.3,NETSCREEN-SMI::netscreenIDS,,,,,,
.1.3.6.1.4.1.3224.4,NETSCREEN-SMI::netscreenVpn,,,,,,
.1.3.6.1.4.1.3224.4.0,NETSCREEN-SMI::netscreenVpnMibModule,,,,,,
.1.3.6.1.4.1.3224.5,NETSCREEN-SMI::netscreenQos,,,,,,
.1.3.6.1.4.1.3224.6,NETSCREEN-SMI::netscreenNsrp,,,,,,
.1.3.6.1.4.1.3224.6.0,NETSCREEN-NSRP-MIB::netscreenNsrpMibModule,,,,,,This module defines the object that are200 used for netscreen redundancy protocol
.1.3.6.1.4.1.3224.6.1,NETSCREEN-NSRP-MIB::netscreenNsrpGeneral,,,,,,
.1.3.6.1.4.1.3224.6.1.1,NETSCREEN-NSRP-MIB::nsrpGeneralClusterId,Integer32,read-only,,current,,The cluster ID
.1.3.6.1.4.1.3224.6.1.2,NETSCREEN-NSRP-MIB::nsrpGeneralLocalUnitId,Integer32,read-only,,current,,local device's unit ID
.1.3.6.1.4.1.3224.6.1.3,NETSCREEN-NSRP-MIB::nsrpGeneralEncrypEnable,INTEGER,read-only,,current,disabled(0):enabled(1),NSRP encryption enabled
.1.3.6.1.4.1.3224.6.1.4,NETSCREEN-NSRP-MIB::nsrpGeneralAuthEnable,INTEGER,read-only,,current,disabled(0):enabled(1),NSRP authentication enabled
.1.3.6.1.4.1.3224.6.1.5,NETSCREEN-NSRP-MIB::nsrpGeneralIfMonitor,OCTET,read-only,,current,,interface being monitored
.1.3.6.1.4.1.3224.6.1.6,NETSCREEN-NSRP-MIB::nsrpGeneralGratArps,Integer32,read-only,,current,,number of gratuitious arps
.1.3.6.1.4.1.3224.6.2,NETSCREEN-NSRP-MIB::netscreenNsrpVSD,,,,,,
.1.3.6.1.4.1.3224.6.2.1,NETSCREEN-NSRP-MIB::nsrpVsdGroupTable,,not-accessible,,current,,A list of VSD groups on the device.
.1.3.6.1.4.1.3224.6.2.1.1,NETSCREEN-NSRP-MIB::nsrpVsdGroupEntry,,not-accessible,nsrpVsdGroupID,current,,An entry containing attributes for a track ip
.1.3.6.1.4.1.3224.6.2.1.1.1,NETSCREEN-NSRP-MIB::nsrpVsdGroupID,Integer32,read-only,,current,,one group ID the device belongs to.
.1.3.6.1.4.1.3224.6.2.1.1.2,NETSCREEN-NSRP-MIB::nsrpVsdGroupPriority,Integer32,read-only,,current,,local unit in current group's priority.
.1.3.6.1.4.1.3224.6.2.1.1.3,NETSCREEN-NSRP-MIB::nsrpVsdGroupPreempt,Integer32,read-only,,current,,local unit in current group's preempt.
.1.3.6.1.4.1.3224.6.2.1.1.4,NETSCREEN-NSRP-MIB::nsrpVsdGroupHoldDownTime,Integer32,read-only,,current,,TBD
.1.3.6.1.4.1.3224.6.2.1.1.5,NETSCREEN-NSRP-MIB::nsrpVsdGroupNumberOfUnit,Integer32,read-only,,current,,unit quantity in this group.
.1.3.6.1.4.1.3224.6.2.1.1.6,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntStateChange,Integer32,read-only,,current,,total number of state transition events
.1.3.6.1.4.1.3224.6.2.1.1.7,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntToInit,Integer32,read-only,,current,,number of state transition into init state, which is as out of ineligible state`
.1.3.6.1.4.1.3224.6.2.1.1.8,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntToMaster,Integer32,read-only,,current,,number of state transition into master state
.1.3.6.1.4.1.3224.6.2.1.1.9,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntToPBackup,Integer32,read-only,,current,,number of state transition into primary backup state
.1.3.6.1.4.1.3224.6.2.1.1.10,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntToBackup,Integer32,read-only,,current,,number of state transition into backup state.
.1.3.6.1.4.1.3224.6.2.1.1.11,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntToIneligible,Integer32,read-only,,current,,number of state transition into ineligible state.
.1.3.6.1.4.1.3224.6.2.1.1.12,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntToInoperable,Integer32,read-only,,current,,number of state transition into inoperable state.
.1.3.6.1.4.1.3224.6.2.1.1.13,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntMasterConflict,Integer32,read-only,,current,,number of times multiple masters exist while the local unit is in master state.
.1.3.6.1.4.1.3224.6.2.1.1.14,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntPbConfilict,Integer32,read-only,,current,,number of times multiple primary backups exist while the local unit is in primary backup state.
.1.3.6.1.4.1.3224.6.2.1.1.15,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntHeartbeatTx,Integer32,read-only,,current,,number of heart beat transfered by a group.
.1.3.6.1.4.1.3224.6.2.1.1.16,NETSCREEN-NSRP-MIB::nsrpVsdGroupCntHeartbeatRx,Integer32,read-only,,current,,number of heart beat received by a group.
.1.3.6.1.4.1.3224.6.2.2,NETSCREEN-NSRP-MIB::nsrpVsdMemberTable,,not-accessible,,current,,A list of devices within the VSD group.
.1.3.6.1.4.1.3224.6.2.2.1,NETSCREEN-NSRP-MIB::nsrpVsdMemberEntry,,not-accessible,nsrpVsdMemberGroupId:nsrpVsdMemberUnitId,current,,A entry containing attributes of one device in a group
.1.3.6.1.4.1.3224.6.2.2.1.1,NETSCREEN-NSRP-MIB::nsrpVsdMemberGroupId,Integer32,read-only,,current,,indicate the Group it belong to
.1.3.6.1.4.1.3224.6.2.2.1.2,NETSCREEN-NSRP-MIB::nsrpVsdMemberUnitId,Integer32,read-only,,current,,VSD group member's unit id
.1.3.6.1.4.1.3224.6.2.2.1.3,NETSCREEN-NSRP-MIB::nsrpVsdMemberStatus,INTEGER,read-only,,current,undefined(0):init(1):master(2):primary-backup(3):backup(4):ineligible(5):inoperable(6),0 Undefined 1 init 2 Master 3 Primary Backup 4 Backup 5 ineligible 6 inoperable
.1.3.6.1.4.1.3224.6.2.2.1.4,NETSCREEN-NSRP-MIB::nsrpVsdMemberPriority,Integer32,read-only,,current,,Priority of unit in this group
.1.3.6.1.4.1.3224.6.2.2.1.5,NETSCREEN-NSRP-MIB::nsrpVsdMemberPreempt,Integer32,read-only,,current,,unit in current group's preempt
.1.3.6.1.4.1.3224.6.2.3,NETSCREEN-NSRP-MIB::nsrpVsdInterfaceTable,,not-accessible,,current,,A list of VSD interfaces on the device.
.1.3.6.1.4.1.3224.6.2.3.1,NETSCREEN-NSRP-MIB::nsrpVsdInterfaceEntry,,not-accessible,nsrpVsdIfIndex,current,,A track entry containing attributes for a track ip
.1.3.6.1.4.1.3224.6.2.3.1.1,NETSCREEN-NSRP-MIB::nsrpVsdIfIndex,Integer32,read-only,,current,,A index.
.1.3.6.1.4.1.3224.6.2.3.1.2,NETSCREEN-NSRP-MIB::nsrpVsdIfStatus,INTEGER,read-only,,current,down(0):inactive(1):active(2),indicate the status of this vsi interface
.1.3.6.1.4.1.3224.6.2.3.1.3,NETSCREEN-NSRP-MIB::nsrpVsdIfGroupId,Integer32,read-only,,current,,indicate the group it belong to
.1.3.6.1.4.1.3224.6.2.3.1.4,NETSCREEN-NSRP-MIB::nsrpVsdIfIp,IpAddress,read-only,,current,,ip ADDRESS
.1.3.6.1.4.1.3224.6.2.3.1.5,NETSCREEN-NSRP-MIB::nsrpVsdIfNetmask,IpAddress,read-only,,current,,subnet mask
.1.3.6.1.4.1.3224.6.2.3.1.6,NETSCREEN-NSRP-MIB::nsrpVsdIfGateway,IpAddress,read-only,,current,,gateway
.1.3.6.1.4.1.3224.6.2.3.1.7,NETSCREEN-NSRP-MIB::nsrpVsdIfName,OCTET,read-only,,current,,trust/untrust/DMZ
.1.3.6.1.4.1.3224.6.2.3.1.8,NETSCREEN-NSRP-MIB::nsrpVsdIfVLAN,Integer32,read-only,,current,,vlan -1 means no vlan
.1.3.6.1.4.1.3224.6.2.3.1.9,NETSCREEN-NSRP-MIB::nsrpVsdIfMAC,OCTET,read-only,,current,,mac address
.1.3.6.1.4.1.3224.6.2.3.1.10,NETSCREEN-NSRP-MIB::nsrpVsdIfVSys,OCTET,read-only,,current,,virtual system
.1.3.6.1.4.1.3224.6.2.3.1.11,NETSCREEN-NSRP-MIB::nsrpVsdIfMngTelnet,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.3.1.12,NETSCREEN-NSRP-MIB::nsrpVsdIfMngSCS,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.3.1.13,NETSCREEN-NSRP-MIB::nsrpVsdIfMngWEB,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.3.1.14,NETSCREEN-NSRP-MIB::nsrpVsdIfMngSSL,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.3.1.15,NETSCREEN-NSRP-MIB::nsrpVsdIfMngSNMP,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.3.1.16,NETSCREEN-NSRP-MIB::nsrpVsdIfMngGlobal,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.3.1.17,NETSCREEN-NSRP-MIB::nsrpVsdIfMngGlobalPro,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.3.1.18,NETSCREEN-NSRP-MIB::nsrpVsdIfMngPing,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.3.1.19,NETSCREEN-NSRP-MIB::nsrpVsdIfMngIdentReset,INTEGER,read-only,,current,disable(0):enable(1),0 Disable 1 Enable
.1.3.6.1.4.1.3224.6.2.4,NETSCREEN-NSRP-MIB::nsrpVsdGeneral,,,,,,
.1.3.6.1.4.1.3224.6.2.4.1,NETSCREEN-NSRP-MIB::nsrpVsdGeneralInitHoldTime,Counter32,read-only,,current,,VSD group init hold time (in second)
.1.3.6.1.4.1.3224.6.2.4.2,NETSCREEN-NSRP-MIB::nsrpVsdGeneralHbInterval,Counter32,read-only,,current,,VSD heart beat interval.(in milisecond)
.1.3.6.1.4.1.3224.6.2.4.3,NETSCREEN-NSRP-MIB::nsrpVsdGeneralHbLostThres,Counter32,read-only,,current,,vsd heartbeat lost threshold
.1.3.6.1.4.1.3224.6.3,NETSCREEN-NSRP-MIB::netscreenNsrpRTO,,,,,,
.1.3.6.1.4.1.3224.6.3.1,NETSCREEN-NSRP-MIB::nsrpRtoGroupTable,,not-accessible,,current,,A list of RTO groups on the device.
.1.3.6.1.4.1.3224.6.3.1.1,NETSCREEN-NSRP-MIB::nsrpRtoGroupEntry,,not-accessible,nsrpRtoGroupId,current,,An entry containing attributes for RTO group
.1.3.6.1.4.1.3224.6.3.1.1.1,NETSCREEN-NSRP-MIB::nsrpRtoGroupId,Integer32,read-only,,current,,A RTO group ID.also used as table index
.1.3.6.1.4.1.3224.6.3.1.1.2,NETSCREEN-NSRP-MIB::nsrpRtoNumOfUnit,Integer32,read-only,,current,,how many units in this RTO group
.1.3.6.1.4.1.3224.6.3.2,NETSCREEN-NSRP-MIB::nsrpRtoUnitTable,,not-accessible,,current,,A list of device status within a RTO group.
.1.3.6.1.4.1.3224.6.3.2.1,NETSCREEN-NSRP-MIB::nsrpRtoUnitEntry,,not-accessible,nsrpRtoUnitGroupId:nsrpRtoUnitId,current,,A track entry containing attributes for a track ip
.1.3.6.1.4.1.3224.6.3.2.1.1,NETSCREEN-NSRP-MIB::nsrpRtoUnitGroupId,Integer32,read-only,,current,,The RTO group id, a unit belongs to
.1.3.6.1.4.1.3224.6.3.2.1.2,NETSCREEN-NSRP-MIB::nsrpRtoUnitId,Integer32,read-only,,current,,device's unit id.
.1.3.6.1.4.1.3224.6.3.2.1.3,NETSCREEN-NSRP-MIB::nsrpRtoUnitStatus,INTEGER,read-only,,current,undefined(0):set(1):active(2),The RTO group id, a unit belongs to
.1.3.6.1.4.1.3224.6.3.2.1.4,NETSCREEN-NSRP-MIB::nsrpRtoUnitDirection,INTEGER,read-only,,current,out(1):in(2),The RTO uint's dirction in the group
.1.3.6.1.4.1.3224.6.3.2.1.5,NETSCREEN-NSRP-MIB::nsrpRtoUnitLostHeartbeat,Counter32,read-only,,current,,counter of heartbeat
.1.3.6.1.4.1.3224.6.3.2.1.6,NETSCREEN-NSRP-MIB::nsrpRtoUnitToActive,Counter32,read-only,,current,,counter of active
.1.3.6.1.4.1.3224.6.3.2.1.7,NETSCREEN-NSRP-MIB::nsrpRtoUnitToSet,Counter32,read-only,,current,,counter of set
.1.3.6.1.4.1.3224.6.3.2.1.8,NETSCREEN-NSRP-MIB::nsrpRtoUnitLostPeer,Counter32,read-only,,current,,counter of lost peer
.1.3.6.1.4.1.3224.6.3.2.1.9,NETSCREEN-NSRP-MIB::nsrpRtoUnitGroupDetach,Counter32,read-only,,current,,counter of rto group detach
.1.3.6.1.4.1.3224.6.3.3,NETSCREEN-NSRP-MIB::nsrpRtoCounter,,,,,,
.1.3.6.1.4.1.3224.6.3.3.1,NETSCREEN-NSRP-MIB::nsrpRtoCounterPakForwarded,Counter32,read-only,,current,,packets forwarded by rto.
.1.3.6.1.4.1.3224.6.3.3.2,NETSCREEN-NSRP-MIB::nsrpRtoCounterPakReceived,Counter32,read-only,,current,,packets received by rto.
.1.3.6.1.4.1.3224.6.3.3.3,NETSCREEN-NSRP-MIB::nsrpRtoCounterTable,,not-accessible,,current,,A list of rto counter object entry.
.1.3.6.1.4.1.3224.6.3.3.3.1,NETSCREEN-NSRP-MIB::nsrpRtoCounterEntry,,not-accessible,nsrpRtoCounterIdx,current,,A rto counter entry containing attributes for a rto counter obj.
.1.3.6.1.4.1.3224.6.3.3.3.1.1,NETSCREEN-NSRP-MIB::nsrpRtoCounterIdx,Integer32,read-only,,current,,counter index.
.1.3.6.1.4.1.3224.6.3.3.3.1.2,NETSCREEN-NSRP-MIB::nsrpRtoCounterName,OCTET,read-only,,current,,Name of a rto counter object.
.1.3.6.1.4.1.3224.6.3.3.3.1.3,NETSCREEN-NSRP-MIB::nsrpRtoCounterSend,Counter32,read-only,,current,,Total number of message sent.
.1.3.6.1.4.1.3224.6.3.3.3.1.4,NETSCREEN-NSRP-MIB::nsrpRtoCounterReceive,Counter32,read-only,,current,,Total number of message received.
.1.3.6.1.4.1.3224.6.3.3.3.1.5,NETSCREEN-NSRP-MIB::nsrpRtoCounterDrop,Counter32,read-only,,current,,Total number of message dropped.
.1.3.6.1.4.1.3224.6.3.4,NETSCREEN-NSRP-MIB::nsrpRtoGeneral,,,,,,
.1.3.6.1.4.1.3224.6.3.4.1,NETSCREEN-NSRP-MIB::nsrpRtoGeneralHbInterval,Counter32,read-only,,current,,rto heart beat interval.
.1.3.6.1.4.1.3224.6.3.4.2,NETSCREEN-NSRP-MIB::nsrpRtoGeneralHbLostThres,Counter32,read-only,,current,,rto heartbeat lost threshold
.1.3.6.1.4.1.3224.6.3.4.3,NETSCREEN-NSRP-MIB::nsrpRtoGeneralSessSyncEnable,INTEGER,read-only,,current,disabled(0):enabled(1),session sync enabled.
.1.3.6.1.4.1.3224.6.4,NETSCREEN-NSRP-MIB::netscreenNsrpTrack,,,,,,
.1.3.6.1.4.1.3224.6.4.1,NETSCREEN-NSRP-MIB::nsrpTrackEnable,Integer32,read-only,,current,,0 means disable, 1 meams enable
.1.3.6.1.4.1.3224.6.4.2,NETSCREEN-NSRP-MIB::nsrpTrackThreshold,Integer32,read-only,,current,,Failover Threshold
.1.3.6.1.4.1.3224.6.4.3,NETSCREEN-NSRP-MIB::nsrpTrackFailoverEnalble,Integer32,read-only,,current,,Failover enable switch
.1.3.6.1.4.1.3224.6.4.4,NETSCREEN-NSRP-MIB::nsrpTrackTable,,not-accessible,,current,,A list of track ip entries.
.1.3.6.1.4.1.3224.6.4.4.1,NETSCREEN-NSRP-MIB::nsrpTrackEntry,,not-accessible,nsrpTrackIpIndex,current,,A track entry containing attributes for a track ip
.1.3.6.1.4.1.3224.6.4.4.1.1,NETSCREEN-NSRP-MIB::nsrpTrackIpIndex,Integer32,read-only,,current,,A unique value for each track ip. Its value ranges between 1 and 65535 and may not be contigous. It has no other meaning but a pure index.
.1.3.6.1.4.1.3224.6.4.4.1.2,NETSCREEN-NSRP-MIB::nsrpTrackIpAddr,IpAddress,read-only,,current,,The IP address of the monitored device.
.1.3.6.1.4.1.3224.6.4.4.1.3,NETSCREEN-NSRP-MIB::nsrpTrackIpStatus,INTEGER,read-only,,current,success(0):fail(1),Status
.1.3.6.1.4.1.3224.6.4.4.1.4,NETSCREEN-NSRP-MIB::nsrpTrackIpTimestamp,Integer32,read-only,,current,,Timestamp of status change. Reference 1970/1/1 0:0
.1.3.6.1.4.1.3224.6.4.4.1.5,NETSCREEN-NSRP-MIB::nsrpTrackIpInterval,Integer32,read-only,,current,,A frequecy how the track ip is checked. It is in unit of seconds.
.1.3.6.1.4.1.3224.6.4.4.1.6,NETSCREEN-NSRP-MIB::nsrpTrackIpThreshhold,Integer32,read-only,,current,,A number of consective failures to regard the device has failed.
.1.3.6.1.4.1.3224.6.4.4.1.7,NETSCREEN-NSRP-MIB::nsrpTrackIpMethod,INTEGER,read-only,,current,ping(0):arp(1),The method to track the device.
.1.3.6.1.4.1.3224.6.4.4.1.8,NETSCREEN-NSRP-MIB::nsrpTrackIpWeight,Integer32,read-only,,current,,The weight of this failure contributing to the failover.
.1.3.6.1.4.1.3224.6.4.4.1.9,NETSCREEN-NSRP-MIB::nsrpTrackIpIfName,OCTET,read-only,,current,,The interface the track messages are sent to. Auto means the actual interface is determined by the routing table.
.1.3.6.1.4.1.3224.6.4.4.1.10,NETSCREEN-NSRP-MIB::nsrpTrackIpTotalCheck,Integer32,read-only,,current,,The number of ping/arp attempts.
.1.3.6.1.4.1.3224.6.4.4.1.11,NETSCREEN-NSRP-MIB::nsrpTrackIpTotalFailedCheck,Integer32,read-only,,current,,The number of total failed attempts.
.1.3.6.1.4.1.3224.6.5,NETSCREEN-NSRP-MIB::netscreenNsrpCluster,,,,,,
.1.3.6.1.4.1.3224.6.5.1,NETSCREEN-NSRP-MIB::nsrpClusterTable,,not-accessible,,current,,A list of cluster on the device.
.1.3.6.1.4.1.3224.6.5.1.1,NETSCREEN-NSRP-MIB::nsrpClusterEntry,,not-accessible,nsrpClusterTblIndex,current,,An entry containing attributes for nsrp cluster
.1.3.6.1.4.1.3224.6.5.1.1.1,NETSCREEN-NSRP-MIB::nsrpClusterTblIndex,Integer32,read-only,,current,,table index
.1.3.6.1.4.1.3224.6.5.1.1.2,NETSCREEN-NSRP-MIB::nsrpClusterUnitId,Integer32,read-only,,current,,Unit id in this cluster
.1.3.6.1.4.1.3224.6.5.1.1.3,NETSCREEN-NSRP-MIB::nsrpClusterUnitCtrlMac,OCTET,read-only,,current,,Unit id's control path mac address
.1.3.6.1.4.1.3224.6.5.1.1.4,NETSCREEN-NSRP-MIB::nsrpClusterUnitDataMac,OCTET,read-only,,current,,Unit id's data path mac address
.1.3.6.1.4.1.3224.6.6,NETSCREEN-NSRP-MIB::netscreenNsrpLinkInfo,,,,,,
.1.3.6.1.4.1.3224.6.6.1,NETSCREEN-NSRP-MIB::nsrpLinkInfoTable,,not-accessible,,current,,A list of NSRP link info
.1.3.6.1.4.1.3224.6.6.1.1,NETSCREEN-NSRP-MIB::nsrpLinkInfoEntry,,not-accessible,nsrpLinkInfoIndex,current,,An entry containing attributes for nsrp link info
.1.3.6.1.4.1.3224.6.6.1.1.1,NETSCREEN-NSRP-MIB::nsrpLinkInfoIndex,Integer32,read-only,,current,,table index
.1.3.6.1.4.1.3224.6.6.1.1.2,NETSCREEN-NSRP-MIB::nsrpLinkInfoLinkType,INTEGER,read-only,,current,control(0):data(1):unused(2):hapath2(3),link type
.1.3.6.1.4.1.3224.6.6.1.1.3,NETSCREEN-NSRP-MIB::nsrpLinkInfoChannel,OCTET,read-only,,current,,link channel's name
.1.3.6.1.4.1.3224.6.6.1.1.4,NETSCREEN-NSRP-MIB::nsrpLinkInfoMac,OCTET,read-only,,current,,link channel's mac address
.1.3.6.1.4.1.3224.6.6.1.1.5,NETSCREEN-NSRP-MIB::nsrpLinkInfoState,INTEGER,read-only,,current,down(0):up(1),link channel's state
.1.3.6.1.4.1.3224.7,NETSCREEN-SMI::netscreenSetting,,,,,,
.1.3.6.1.4.1.3224.7.0,NETSCREEN-SMI::netscreenSettingMibModule,,,,,,
.1.3.6.1.4.1.3224.7.0.1,NETSCREEN-SET-GEN-MIB::netscreenSetGenMibModule,,,,,,This module defines the object that are used to monitor all the configuration info
.1.3.6.1.4.1.3224.7.1,NETSCREEN-SET-GEN-MIB::nsSetGeneral,,,,,,
.1.3.6.1.4.1.3224.7.1.1,NETSCREEN-SET-GEN-MIB::nsSetGenSysIp,IpAddress,read-only,,current,,System Ip address
.1.3.6.1.4.1.3224.7.1.2,NETSCREEN-SET-GEN-MIB::nsSetGenHostName,OCTET,read-only,,current,,Host name of NetScreen device.
.1.3.6.1.4.1.3224.7.1.3,NETSCREEN-SET-GEN-MIB::nsSetGenDomain,OCTET,read-only,,current,,Domain name of NetScreen device.
.1.3.6.1.4.1.3224.7.1.4,NETSCREEN-SET-GEN-MIB::nsSetGenOpMode,OCTET,read-only,,current,,NetScreen device can work in one of the tree mode: transparent, NAT and route. This attribute indicates which operation mode it use.
.1.3.6.1.4.1.3224.7.1.5,NETSCREEN-SET-GEN-MIB::nsSetGenSwVer,OCTET,read-only,,current,,NetSceen OS version.
.1.3.6.1.4.1.3224.7.1.6,NETSCREEN-SET-GEN-MIB::nsSetGenLicInfo,OCTET,read-only,,current,,NetScreen OS license information.
.1.3.6.1.4.1.3224.7.1.7,NETSCREEN-SET-GEN-MIB::nsSetGenSCSAdminEnable,INTEGER,read-only,,current,disable(0):enabled(1),enable Command Security Shell
.1.3.6.1.4.1.3224.7.1.8,NETSCREEN-SET-GEN-MIB::nsSetGenDropSelfLogPac,INTEGER,read-only,,current,disable(0):enabled(1),Log Packets to Self that are dropped
.1.3.6.1.4.1.3224.8,NETSCREEN-SMI::netscreenZone,,,,,,
.1.3.6.1.4.1.3224.9,NETSCREEN-SMI::netscreenInterface,,,,,,
.1.3.6.1.4.1.3224.9.0,NETSCREEN-INTERFACE-MIB::netscreenInterfaceMibModule,,,,,,This module defines the object that are used to monitor NS's interface configuration
.1.3.6.1.4.1.3224.9.1,NETSCREEN-INTERFACE-MIB::nsIfTable,,not-accessible,,current,,All NetScreen devices have a trusted interface and an untrusted interface. The NetScreen-10 and -100 also have a DMZ interface. Additionally, on each of the virtual systems supported by the NetScreen-1000 there can be on or more tursted subinterfaces linking a particular virtual system to one or more virtual LANs. Other interfaces-some physical, some logical, and some virtual-provide exclusive channels for administrative traffic, or for communication among member in a redundant group. In this table, it will collect following interface: tursted interface, untrusted interface, DMZ interface, Management Interface and Subinterface.
.1.3.6.1.4.1.3224.9.1.1,NETSCREEN-INTERFACE-MIB::nsIfEntry,,not-accessible,nsIfIndex,current,,nsIfEntry collects some attributes about NetScreen interface settings.
.1.3.6.1.4.1.3224.9.1.1.1,NETSCREEN-INTERFACE-MIB::nsIfIndex,Integer32,read-only,,current,,Interface number which uniquely identifies an interface.
.1.3.6.1.4.1.3224.9.1.1.2,NETSCREEN-INTERFACE-MIB::nsIfName,OCTET,read-only,,current,,Each interface has a readable name such as 'trust', 'trust/1', etc.
.1.3.6.1.4.1.3224.9.1.1.3,NETSCREEN-INTERFACE-MIB::nsIfVsys,Integer32,read-only,,current,,According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting belongs to 'root' vsys.
.1.3.6.1.4.1.3224.9.1.1.4,NETSCREEN-INTERFACE-MIB::nsIfZone,Integer32,read-only,,current,,Each interface belongs to one security zone. This attribute displays the security zone name an interface belongs to.
.1.3.6.1.4.1.3224.9.1.1.5,NETSCREEN-INTERFACE-MIB::nsIfStatus,INTEGER,read-only,,current,down(0):up(1):ready(2):inactive(3),The interface status which indicates interface's operational status.
.1.3.6.1.4.1.3224.9.1.1.6,NETSCREEN-INTERFACE-MIB::nsIfIp,IpAddress,read-only,,current,,Each interface must be assigned an IP address.
.1.3.6.1.4.1.3224.9.1.1.7,NETSCREEN-INTERFACE-MIB::nsIfNetmask,IpAddress,read-only,,current,,Each interface must belong to a subnet represented by netmask.
.1.3.6.1.4.1.3224.9.1.1.8,NETSCREEN-INTERFACE-MIB::nsIfGateway,IpAddress,read-only,,current,,Default gateway ip address.
.1.3.6.1.4.1.3224.9.1.1.9,NETSCREEN-INTERFACE-MIB::nsIfMngIp,IpAddress,read-only,,current,,Trusted, untrusted and DMZ interfaces can have two IP address: an interface IP address that corresponds to the physical port through which that interface connects to a network, and a Manage IP address that can be used to receive administrative traffic
.1.3.6.1.4.1.3224.9.1.1.10,NETSCREEN-INTERFACE-MIB::nsIfMode,INTEGER,read-only,,current,transparent(0):nat(1):route(2):not-applicable(3),NetScreen interface can has three operation modes. They are transparent, nat and route.
.1.3.6.1.4.1.3224.9.1.1.11,NETSCREEN-INTERFACE-MIB::nsIfMAC,OCTET,read-only,,current,,MAC address the interface has.
.1.3.6.1.4.1.3224.9.1.1.12,NETSCREEN-INTERFACE-MIB::nsIfMngTelnet,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits telnet management.
.1.3.6.1.4.1.3224.9.1.1.13,NETSCREEN-INTERFACE-MIB::nsIfMngSCS,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits Secure Command Shell management.
.1.3.6.1.4.1.3224.9.1.1.14,NETSCREEN-INTERFACE-MIB::nsIfMngWEB,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits WEB UI management.
.1.3.6.1.4.1.3224.9.1.1.15,NETSCREEN-INTERFACE-MIB::nsIfMngSSL,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits SSL management.
.1.3.6.1.4.1.3224.9.1.1.16,NETSCREEN-INTERFACE-MIB::nsIfMngSNMP,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits SNMP management.
.1.3.6.1.4.1.3224.9.1.1.17,NETSCREEN-INTERFACE-MIB::nsIfMngGlobal,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits NS Global management.
.1.3.6.1.4.1.3224.9.1.1.18,NETSCREEN-INTERFACE-MIB::nsIfMngGlobalPro,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits NS Global Pro management.
.1.3.6.1.4.1.3224.9.1.1.19,NETSCREEN-INTERFACE-MIB::nsIfMngPing,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits Ping go-through.
.1.3.6.1.4.1.3224.9.1.1.20,NETSCREEN-INTERFACE-MIB::nsIfMngIdentReset,INTEGER,read-only,,current,disable(0):enable(1),This attribute is used to indicate whether the interface permits ident reset.
.1.3.6.1.4.1.3224.9.1.1.21,NETSCREEN-INTERFACE-MIB::nsIfInfo,Integer32,read-only,,current,,Internal id assigned to this interface. Stays persistent across resets.
.1.3.6.1.4.1.3224.9.1.1.22,NETSCREEN-INTERFACE-MIB::nsIfDescr,OCTET,read-only,,current,,Each interface has a a configurable descriptor string.
.1.3.6.1.4.1.3224.9.2,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpTable,,not-accessible,,current,,In some ScreenOS, it supports multiple IP addresses and related subnets based on the same interface. This table collects the multiple IP addresses configuration on an interface.
.1.3.6.1.4.1.3224.9.2.1,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpEntry,,not-accessible,nsIfSecondaryIpIndex,current,,nsIfSecondaryIpEntry collects some attributes about multiple IP configurations on an interface.
.1.3.6.1.4.1.3224.9.2.1.1,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpIndex,Integer32,read-only,,current,,The table index used as primary key when retrieving the table.
.1.3.6.1.4.1.3224.9.2.1.2,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpIfIdx,Integer32,read-only,,current,,The index value which uniquely identifies an interface the secodary ip belongs to. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.4.1.3224.9.2.1.3,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpVsys,Integer32,read-only,,current,,According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system ID an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting belongs to 'root' vsys.
.1.3.6.1.4.1.3224.9.2.1.4,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpZone,Integer32,read-only,,current,,each interface belongs to one security zone. this attribute displays the security zone name an interface belongs to.
.1.3.6.1.4.1.3224.9.2.1.5,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpAddress,IpAddress,read-only,,current,,Ip Address value.
.1.3.6.1.4.1.3224.9.2.1.6,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpNetmask,IpAddress,read-only,,current,,Subnet of a ip belongs to.
.1.3.6.1.4.1.3224.9.2.1.7,NETSCREEN-INTERFACE-MIB::nsIfSecondaryIpIfInfo,Integer32,read-only,,current,,Internal id assigned to this interface. Stays persistent across resets.
.1.3.6.1.4.1.3224.9.3,NETSCREEN-INTERFACE-MIB::nsIfFlowTable,,not-accessible,,current,,nsIfFlowTable is used to get flow statistical information of the interface.
.1.3.6.1.4.1.3224.9.3.1,NETSCREEN-INTERFACE-MIB::nsIfFlowEntry,,not-accessible,nsIfFlowIfIdx,current,,Table entry collect some attributes about interface flow counters.
.1.3.6.1.4.1.3224.9.3.1.1,NETSCREEN-INTERFACE-MIB::nsIfFlowIfIdx,Integer32,read-only,,current,,Unique interface id, also used as table index.
.1.3.6.1.4.1.3224.9.3.1.2,NETSCREEN-INTERFACE-MIB::nsIfFlowVsys,Integer32,read-only,,current,,According NetScreen's concepts. each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.
.1.3.6.1.4.1.3224.9.3.1.3,NETSCREEN-INTERFACE-MIB::nsIfFlowInByte,Counter32,read-only,,current,,Incoming byte number arriving at the this interface
.1.3.6.1.4.1.3224.9.3.1.4,NETSCREEN-INTERFACE-MIB::nsIfFlowInPacket,Counter32,read-only,,current,,Incoming packet number arriving at the this interface
.1.3.6.1.4.1.3224.9.3.1.5,NETSCREEN-INTERFACE-MIB::nsIfFlowOutByte,Counter32,read-only,,current,,Outgoing byte number sending through this interface
.1.3.6.1.4.1.3224.9.3.1.6,NETSCREEN-INTERFACE-MIB::nsIfFlowOutPacket,Counter32,read-only,,current,,Outgoing packet number sending through this interface
.1.3.6.1.4.1.3224.9.3.1.7,NETSCREEN-INTERFACE-MIB::nsIfFlowInVpn,Counter32,read-only,,current,,VPN packet go through this interface
.1.3.6.1.4.1.3224.9.3.1.8,NETSCREEN-INTERFACE-MIB::nsIfInVlan,Counter32,read-only,,current,,Incoming vlan packet
.1.3.6.1.4.1.3224.9.3.1.9,NETSCREEN-INTERFACE-MIB::nsIfOutVlan,Counter32,read-only,,current,,Outgoing vlan packet
.1.3.6.1.4.1.3224.9.3.1.10,NETSCREEN-INTERFACE-MIB::nsIfFlowIfInfo,Integer32,read-only,,current,,Internal id assigned to this interface. Stays persistent across resets.
.1.3.6.1.4.1.3224.9.4,NETSCREEN-INTERFACE-MIB::nsIfMonTable,,not-accessible,,current,,This table collects some of dropped packet counters of interface
.1.3.6.1.4.1.3224.9.4.1,NETSCREEN-INTERFACE-MIB::nsIfMonEntry,,not-accessible,nsIfMonIfIdx,current,,An entry containing tunnel information
.1.3.6.1.4.1.3224.9.4.1.1,NETSCREEN-INTERFACE-MIB::nsIfMonIfIdx,Integer32,read-only,,current,,Unique interface id, also used as table index.
.1.3.6.1.4.1.3224.9.4.1.2,NETSCREEN-INTERFACE-MIB::nsIfMonVsys,Integer32,read-only,,current,,According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.
.1.3.6.1.4.1.3224.9.4.1.3,NETSCREEN-INTERFACE-MIB::nsIfMonPlyDeny,Counter32,read-only,,current,,Packet drop since denied by policy.
.1.3.6.1.4.1.3224.9.4.1.4,NETSCREEN-INTERFACE-MIB::nsIfMonAuthFail,Counter32,read-only,,current,,Packet drop due to authentication failed.
.1.3.6.1.4.1.3224.9.4.1.5,NETSCREEN-INTERFACE-MIB::nsIfMonUrlBlock,Counter32,read-only,,current,,Packet drop due to URL blocking.
.1.3.6.1.4.1.3224.9.4.1.6,NETSCREEN-INTERFACE-MIB::nsIfMonTrMngQueue,Counter32,read-only,,current,,packet queue up due to traffic management
.1.3.6.1.4.1.3224.9.4.1.7,NETSCREEN-INTERFACE-MIB::nsIfMonTrMngDrop,Counter32,read-only,,current,,Packet drop due to traffic management
.1.3.6.1.4.1.3224.9.4.1.8,NETSCREEN-INTERFACE-MIB::nsIfMonEncFail,Counter32,read-only,,current,,IPSec enc failed due to sa not available, no ipak, etc
.1.3.6.1.4.1.3224.9.4.1.9,NETSCREEN-INTERFACE-MIB::nsIfMonNoSa,Counter32,read-only,,current,,packet drop due to no sa found for incomig spi
.1.3.6.1.4.1.3224.9.4.1.10,NETSCREEN-INTERFACE-MIB::nsIfMonNoSaPly,Counter32,read-only,,current,,packet drop due to no policy associated with found sa
.1.3.6.1.4.1.3224.9.4.1.11,NETSCREEN-INTERFACE-MIB::nsIfMonSaInactive,Counter32,read-only,,current,,packet drop due to sa not active
.1.3.6.1.4.1.3224.9.4.1.12,NETSCREEN-INTERFACE-MIB::nsIfMonSaPolicyDeny,Counter32,read-only,,current,,packet drop due to denial by sa policy
.1.3.6.1.4.1.3224.9.4.1.13,NETSCREEN-INTERFACE-MIB::nsIfMonIfInfo,Integer32,read-only,,current,,Internal id assigned to this interface. Stays persistent across resets.
.1.3.6.1.4.1.3224.10,NETSCREEN-SMI::netscreenPolicy,,,,,,
.1.3.6.1.4.1.3224.11,NETSCREEN-SMI::netscreenNAT,,,,,,
.1.3.6.1.4.1.3224.12,NETSCREEN-SMI::netscreenAddr,,,,,,
.1.3.6.1.4.1.3224.13,NETSCREEN-SMI::netscreenService,,,,,,
.1.3.6.1.4.1.3224.14,NETSCREEN-SMI::netscreenSchedule,,,,,,
.1.3.6.1.4.1.3224.15,NETSCREEN-SMI::netscreenVsys,,,,,,
.1.3.6.1.4.1.3224.16,NETSCREEN-SMI::netscreenResource,,,,,,
.1.3.6.1.4.1.3224.16.0,NETSCREEN-RESOURCE-MIB::netscreenResourceMibModule,,,,,,This module defines the object that are used to monitor resource in netscreen box
.1.3.6.1.4.1.3224.16.1,NETSCREEN-RESOURCE-MIB::nsResCPU,,,,,,
.1.3.6.1.4.1.3224.16.1.1,NETSCREEN-RESOURCE-MIB::nsResCpuAvg,Integer32,read-only,,current,,Average System CPU utilization in percentage.
.1.3.6.1.4.1.3224.16.1.2,NETSCREEN-RESOURCE-MIB::nsResCpuLast1Min,Integer32,read-only,,current,,Last one minute CPU utilization in percentage.
.1.3.6.1.4.1.3224.16.1.3,NETSCREEN-RESOURCE-MIB::nsResCpuLast5Min,Integer32,read-only,,current,,Last five minutes CPU utilization in percentage.
.1.3.6.1.4.1.3224.16.1.4,NETSCREEN-RESOURCE-MIB::nsResCpuLast15Min,Integer32,read-only,,current,,Last fifteen minutes CPU utilization in percentage.
.1.3.6.1.4.1.3224.16.2,NETSCREEN-RESOURCE-MIB::nsResMem,,,,,,
.1.3.6.1.4.1.3224.16.2.1,NETSCREEN-RESOURCE-MIB::nsResMemAllocate,Integer32,read-only,,current,,Memory allocated.
.1.3.6.1.4.1.3224.16.2.2,NETSCREEN-RESOURCE-MIB::nsResMemLeft,Integer32,read-only,,current,,Memory left.
.1.3.6.1.4.1.3224.16.2.3,NETSCREEN-RESOURCE-MIB::nsResMemFrag,Integer32,read-only,,current,,Memory fragment.
.1.3.6.1.4.1.3224.16.3,NETSCREEN-RESOURCE-MIB::nsResSession,,,,,,
.1.3.6.1.4.1.3224.16.3.2,NETSCREEN-RESOURCE-MIB::nsResSessAllocate,Integer32,read-only,,current,,Allocate session number.
.1.3.6.1.4.1.3224.16.3.3,NETSCREEN-RESOURCE-MIB::nsResSessMaxium,Integer32,read-only,,current,,Maxium session number system can afford.
.1.3.6.1.4.1.3224.16.3.4,NETSCREEN-RESOURCE-MIB::nsResSessFailed,Integer32,read-only,,current,,Failed session allocation counters.
.1.3.6.1.4.1.3224.17,NETSCREEN-SMI::netscreenIp,,,,,,
.1.3.6.1.4.1.3224.17.1,NETSCREEN-IP-ARP-MIB::nsIpArp,,,,,,This module defines NetScreen private MIBs for ARP
.1.3.6.1.4.1.3224.17.1.1,NETSCREEN-IP-ARP-MIB::nsIpArpAOD,INTEGER,not-accessible,,current,disable(0):enabled(1),ARP always on destination.
.1.3.6.1.4.1.3224.17.1.2,NETSCREEN-IP-ARP-MIB::nsIpArpCachUpdate,INTEGER,not-accessible,,current,disable(0):enabled(1),ARP cache update.
.1.3.6.1.4.1.3224.17.1.3,NETSCREEN-IP-ARP-MIB::nsIpArpTable,,not-accessible,,current,,This table collects all the ARP entries existing in NetScreen device.
.1.3.6.1.4.1.3224.17.1.3.1,NETSCREEN-IP-ARP-MIB::nsIpArpEntry,,not-accessible,nsIpArpIndex,current,,An entry containing attributes of arp info
.1.3.6.1.4.1.3224.17.1.3.1.1,NETSCREEN-IP-ARP-MIB::nsIpArpIndex,Integer32,read-only,,current,,A unique value for arp table. Its value ranges between 0 and 65535 and may not be contiguous.
.1.3.6.1.4.1.3224.17.1.3.1.2,NETSCREEN-IP-ARP-MIB::nsIpArpIp,IpAddress,read-only,,current,,IP address.
.1.3.6.1.4.1.3224.17.1.3.1.3,NETSCREEN-IP-ARP-MIB::nsIpArpMac,OCTET,read-only,,current,,MAC address.
.1.3.6.1.4.1.3224.17.1.3.1.4,NETSCREEN-IP-ARP-MIB::nsIpArpVsys,Integer32,read-only,,current,,Virtual system id this entry belongs to.
.1.3.6.1.4.1.3224.17.1.3.1.5,NETSCREEN-IP-ARP-MIB::nsIpArpIfIdx,Integer32,read-only,,current,,Interface location.
.1.3.6.1.4.1.3224.17.1.3.1.6,NETSCREEN-IP-ARP-MIB::nsIpArpState,INTEGER,read-only,,current,pending(1):valid(2):delete(3):static(4),ARP entry state.
.1.3.6.1.4.1.3224.17.1.3.1.7,NETSCREEN-IP-ARP-MIB::nsIpArpAge,Integer32,read-only,,current,,ARP entry age.
.1.3.6.1.4.1.3224.17.1.3.1.8,NETSCREEN-IP-ARP-MIB::nsIpArpRetry,Integer32,read-only,,current,,ARP entry retry time.
.1.3.6.1.4.1.3224.17.1.3.1.9,NETSCREEN-IP-ARP-MIB::nsIpArpPakQue,Integer32,read-only,,current,,ARP entry package queue.
.1.3.6.1.4.1.3224.18,NETSCREEN-SMI::netscreenVR,,,,,,
.1.3.6.1.4.1.3224.18.2,NETSCREEN-OSPF-MIB::nsOspf,,,,,,The MIB module to describe the NS-OSPF Version 2 Protocol
.1.3.6.1.4.1.3224.18.2.1,NETSCREEN-OSPF-MIB::nsOspfGeneralTable,,not-accessible,,deprecated,,Ospf general information table per VR
.1.3.6.1.4.1.3224.18.2.1.1,NETSCREEN-OSPF-MIB::nsOspfGeneralEntry,,not-accessible,nsOspfGeneralVRID,deprecated,,Ospf general information table per VR
.1.3.6.1.4.1.3224.18.2.1.1.1,NETSCREEN-OSPF-MIB::nsOspfRouterId,IpAddress,read-only,,deprecated,,A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
.1.3.6.1.4.1.3224.18.2.1.1.2,NETSCREEN-OSPF-MIB::nsOspfAdminStat,INTEGER,read-only,,deprecated,enabled(1):disabled(2),The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one inter- face; 'disabled' disables it on all inter- faces.
.1.3.6.1.4.1.3224.18.2.1.1.3,NETSCREEN-OSPF-MIB::nsOspfVersionNumber,INTEGER,read-only,,deprecated,version2(2),The deprecated version number of the OSPF proto- col is 2.
.1.3.6.1.4.1.3224.18.2.1.1.4,NETSCREEN-OSPF-MIB::nsOspfAreaBdrRtrStatus,INTEGER,read-only,,deprecated,true(1):false(2),A flag to note whether this router is an area border router.
.1.3.6.1.4.1.3224.18.2.1.1.5,NETSCREEN-OSPF-MIB::nsOspfASBdrRtrStatus,INTEGER,read-only,,deprecated,true(1):false(2),A flag to note whether this router is config- ured as an Autonomous System border router.
.1.3.6.1.4.1.3224.18.2.1.1.6,NETSCREEN-OSPF-MIB::nsOspfExternLsaCount,Gauge32,read-only,,deprecated,,The number of external (LS type 5) link-state advertisements in the link-state database.
.1.3.6.1.4.1.3224.18.2.1.1.7,NETSCREEN-OSPF-MIB::nsOspfExternLsaCksumSum,Integer32,read-only,,deprecated,,The 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
.1.3.6.1.4.1.3224.18.2.1.1.8,NETSCREEN-OSPF-MIB::nsOspfTOSSupport,INTEGER,read-only,,deprecated,true(1):false(2),The router's support for type-of-service rout- ing.
.1.3.6.1.4.1.3224.18.2.1.1.9,NETSCREEN-OSPF-MIB::nsOspfOriginateNewLsas,Counter32,read-only,,deprecated,,The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA.
.1.3.6.1.4.1.3224.18.2.1.1.10,NETSCREEN-OSPF-MIB::nsOspfRxNewLsas,Counter32,read-only,,deprecated,,The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments.
.1.3.6.1.4.1.3224.18.2.1.1.11,NETSCREEN-OSPF-MIB::nsOspfExtLsdbLimit,Integer32,read-only,,deprecated,,The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches nsOspfExtLsdbLimit, the router enters Overflow- State. The router never holds more than nsOspfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).
.1.3.6.1.4.1.3224.18.2.1.1.12,NETSCREEN-OSPF-MIB::nsOspfMulticastExtensions,Integer32,read-only,,deprecated,,A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled.
.1.3.6.1.4.1.3224.18.2.1.1.13,NETSCREEN-OSPF-MIB::nsOspfExitOverflowInterval,Integer32,read-only,,deprecated,,The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.
.1.3.6.1.4.1.3224.18.2.1.1.14,NETSCREEN-OSPF-MIB::nsOspfDemandExtensions,INTEGER,read-only,,deprecated,true(1):false(2),The router's support for demand routing.
.1.3.6.1.4.1.3224.18.2.1.1.15,NETSCREEN-OSPF-MIB::nsOspfGeneralVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.2,NETSCREEN-OSPF-MIB::nsOspfAreaTable,,not-accessible,,deprecated,,Information describing the configured parame- ters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.3224.18.2.2.1,NETSCREEN-OSPF-MIB::nsOspfAreaEntry,,not-accessible,nsOspfAreaId:nsOspfAreaVRID,deprecated,,Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas.
.1.3.6.1.4.1.3224.18.2.2.1.1,NETSCREEN-OSPF-MIB::nsOspfAreaId,IpAddress,read-only,,deprecated,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.4.1.3224.18.2.2.1.3,NETSCREEN-OSPF-MIB::nsOspfImportAsExtern,INTEGER,read-create,,deprecated,importExternal(1):importNoExternal(2):importNssa(3),The area's support for importing AS external link- state advertisements.
.1.3.6.1.4.1.3224.18.2.2.1.4,NETSCREEN-OSPF-MIB::nsOspfSpfRuns,Counter32,read-only,,deprecated,,The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.
.1.3.6.1.4.1.3224.18.2.2.1.5,NETSCREEN-OSPF-MIB::nsOspfAreaBdrRtrCount,Gauge32,read-only,,deprecated,,The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.
.1.3.6.1.4.1.3224.18.2.2.1.6,NETSCREEN-OSPF-MIB::nsOspfAsBdrRtrCount,Gauge32,read-only,,deprecated,,The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
.1.3.6.1.4.1.3224.18.2.2.1.7,NETSCREEN-OSPF-MIB::nsOspfAreaLsaCount,Gauge32,read-only,,deprecated,,The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.
.1.3.6.1.4.1.3224.18.2.2.1.8,NETSCREEN-OSPF-MIB::nsOspfAreaLsaCksumSum,Integer32,read-only,,deprecated,,The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers.
.1.3.6.1.4.1.3224.18.2.2.1.9,NETSCREEN-OSPF-MIB::nsOspfAreaSummary,INTEGER,read-create,,deprecated,noAreaSummary(1):sendAreaSummary(2),The variable nsOspfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
.1.3.6.1.4.1.3224.18.2.2.1.10,NETSCREEN-OSPF-MIB::nsOspfAreaStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.3224.18.2.2.1.11,NETSCREEN-OSPF-MIB::nsOspfAreaVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.3,NETSCREEN-OSPF-MIB::nsOspfStubAreaTable,,not-accessible,,deprecated,,The set of metrics that will be advertised by a default Area Border Router into a stub area.
.1.3.6.1.4.1.3224.18.2.3.1,NETSCREEN-OSPF-MIB::nsOspfStubAreaEntry,,not-accessible,nsOspfStubAreaId:nsOspfStubTOS:nsOspfStubVRID,deprecated,,The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area.
.1.3.6.1.4.1.3224.18.2.3.1.1,NETSCREEN-OSPF-MIB::nsOspfStubAreaId,IpAddress,read-only,,deprecated,,The 32 bit identifier for the Stub Area. On creation, this can be derived from the in- stance.
.1.3.6.1.4.1.3224.18.2.3.1.2,NETSCREEN-OSPF-MIB::nsOspfStubTOS,Integer32,read-only,,deprecated,,The Type of Service associated with the metric. On creation, this can be derived from the instance.
.1.3.6.1.4.1.3224.18.2.3.1.3,NETSCREEN-OSPF-MIB::nsOspfStubMetric,Integer32,read-create,,deprecated,,The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the inter- faces to other areas.
.1.3.6.1.4.1.3224.18.2.3.1.4,NETSCREEN-OSPF-MIB::nsOspfStubStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.3224.18.2.3.1.5,NETSCREEN-OSPF-MIB::nsOspfStubMetricType,INTEGER,read-create,,deprecated,nsOspfMetric(1):comparableCost(2):nonComparable(3),This variable displays the type of metric ad- vertised as a default route.
.1.3.6.1.4.1.3224.18.2.3.1.6,NETSCREEN-OSPF-MIB::nsOspfStubVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.4,NETSCREEN-OSPF-MIB::nsOspfLsdbTable,,not-accessible,,deprecated,,The OSPF Process's Link State Database.
.1.3.6.1.4.1.3224.18.2.4.1,NETSCREEN-OSPF-MIB::nsOspfLsdbEntry,,not-accessible,nsOspfLsdbAreaId:nsOspfLsdbType:nsOspfLsdbLsid:nsOspfLsdbRouterId:nsOspfLsdbVRID,deprecated,,A single Link State Advertisement.
.1.3.6.1.4.1.3224.18.2.4.1.1,NETSCREEN-OSPF-MIB::nsOspfLsdbAreaId,IpAddress,read-only,,deprecated,,The 32 bit identifier of the Area from which the LSA was received.
.1.3.6.1.4.1.3224.18.2.4.1.2,NETSCREEN-OSPF-MIB::nsOspfLsdbType,INTEGER,read-only,,deprecated,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7),The type of the link state advertisement. Each link state type has a separate advertise- ment format.
.1.3.6.1.4.1.3224.18.2.4.1.3,NETSCREEN-OSPF-MIB::nsOspfLsdbLsid,IpAddress,read-only,,deprecated,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.3224.18.2.4.1.4,NETSCREEN-OSPF-MIB::nsOspfLsdbRouterId,IpAddress,read-only,,deprecated,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.3224.18.2.4.1.5,NETSCREEN-OSPF-MIB::nsOspfLsdbSequence,Integer32,read-only,,deprecated,,The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.3224.18.2.4.1.6,NETSCREEN-OSPF-MIB::nsOspfLsdbAge,Integer32,read-only,,deprecated,,This field is the age of the link state adver- tisement in seconds.
.1.3.6.1.4.1.3224.18.2.4.1.7,NETSCREEN-OSPF-MIB::nsOspfLsdbChecksum,Integer32,read-only,,deprecated,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.3224.18.2.4.1.8,NETSCREEN-OSPF-MIB::nsOspfLsdbAdvertisement,OCTET,read-only,,deprecated,,The entire Link State Advertisement, including its header.
.1.3.6.1.4.1.3224.18.2.4.1.9,NETSCREEN-OSPF-MIB::nsOspfLsdbVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.6,NETSCREEN-OSPF-MIB::nsOspfHostTable,,not-accessible,,deprecated,,The list of Hosts, and their metrics, that the router will advertise as host routes.
.1.3.6.1.4.1.3224.18.2.6.1,NETSCREEN-OSPF-MIB::nsOspfHostEntry,,not-accessible,nsOspfHostIpAddress:nsOspfHostTOS:nsOspfHostVRID,deprecated,,A metric to be advertised, for a given type of service, when a given host is reachable.
.1.3.6.1.4.1.3224.18.2.6.1.1,NETSCREEN-OSPF-MIB::nsOspfHostIpAddress,IpAddress,read-only,,deprecated,,The IP Address of the Host.
.1.3.6.1.4.1.3224.18.2.6.1.2,NETSCREEN-OSPF-MIB::nsOspfHostTOS,Integer32,read-only,,deprecated,,The Type of Service of the route being config- ured.
.1.3.6.1.4.1.3224.18.2.6.1.3,NETSCREEN-OSPF-MIB::nsOspfHostMetric,Integer32,read-create,,deprecated,,The Metric to be advertised.
.1.3.6.1.4.1.3224.18.2.6.1.4,NETSCREEN-OSPF-MIB::nsOspfHostStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.3224.18.2.6.1.5,NETSCREEN-OSPF-MIB::nsOspfHostAreaID,IpAddress,read-only,,deprecated,,The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF in- terface is in, or 0.0.0.0
.1.3.6.1.4.1.3224.18.2.6.1.6,NETSCREEN-OSPF-MIB::nsOspfHostVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.7,NETSCREEN-OSPF-MIB::nsOspfIfTable,,not-accessible,,deprecated,,The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
.1.3.6.1.4.1.3224.18.2.7.1,NETSCREEN-OSPF-MIB::nsOspfIfEntry,,not-accessible,nsOspfIfIpAddress:nsOspfAddressLessIf:nsOspfIfVRID,deprecated,,The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF.
.1.3.6.1.4.1.3224.18.2.7.1.1,NETSCREEN-OSPF-MIB::nsOspfIfIpAddress,IpAddress,read-only,,deprecated,,The IP address of this OSPF interface.
.1.3.6.1.4.1.3224.18.2.7.1.2,NETSCREEN-OSPF-MIB::nsOspfAddressLessIf,Integer32,read-only,,deprecated,,For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
.1.3.6.1.4.1.3224.18.2.7.1.3,NETSCREEN-OSPF-MIB::nsOspfIfAreaId,IpAddress,read-create,,deprecated,,A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.4.1.3224.18.2.7.1.4,NETSCREEN-OSPF-MIB::nsOspfIfType,INTEGER,read-create,,deprecated,broadcast(1):nbma(2):pointToPoint(3):pointToMultipoint(5),The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
.1.3.6.1.4.1.3224.18.2.7.1.5,NETSCREEN-OSPF-MIB::nsOspfIfAdminStat,INTEGER,read-create,,deprecated,enabled(1):disabled(2),The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
.1.3.6.1.4.1.3224.18.2.7.1.6,NETSCREEN-OSPF-MIB::nsOspfIfRtrPriority,Integer32,read-create,,deprecated,,The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
.1.3.6.1.4.1.3224.18.2.7.1.7,NETSCREEN-OSPF-MIB::nsOspfIfTransitDelay,Integer32,read-create,,deprecated,,The estimated number of seconds it takes to transmit a link state update packet over this interface.
.1.3.6.1.4.1.3224.18.2.7.1.8,NETSCREEN-OSPF-MIB::nsOspfIfRetransInterval,Integer32,read-create,,deprecated,,The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
.1.3.6.1.4.1.3224.18.2.7.1.9,NETSCREEN-OSPF-MIB::nsOspfIfHelloInterval,Integer32,read-create,,deprecated,,The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
.1.3.6.1.4.1.3224.18.2.7.1.10,NETSCREEN-OSPF-MIB::nsOspfIfRtrDeadInterval,Integer32,read-create,,deprecated,,The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
.1.3.6.1.4.1.3224.18.2.7.1.11,NETSCREEN-OSPF-MIB::nsOspfIfPollInterval,Integer32,read-create,,deprecated,,The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
.1.3.6.1.4.1.3224.18.2.7.1.12,NETSCREEN-OSPF-MIB::nsOspfIfState,INTEGER,read-only,,deprecated,down(1):loopback(2):waiting(3):pointToPoint(4):designatedRouter(5):backupDesignatedRouter(6):otherDesignatedRouter(7),The OSPF Interface State.
.1.3.6.1.4.1.3224.18.2.7.1.13,NETSCREEN-OSPF-MIB::nsOspfIfDesignatedRouter,IpAddress,read-only,,deprecated,,The IP Address of the Designated Router.
.1.3.6.1.4.1.3224.18.2.7.1.14,NETSCREEN-OSPF-MIB::nsOspfIfBackupDesignatedRouter,IpAddress,read-only,,deprecated,,The IP Address of the Backup Designated Router.
.1.3.6.1.4.1.3224.18.2.7.1.15,NETSCREEN-OSPF-MIB::nsOspfIfEvents,Counter32,read-only,,deprecated,,The number of times this OSPF interface has changed its state, or an error has occurred.
.1.3.6.1.4.1.3224.18.2.7.1.16,NETSCREEN-OSPF-MIB::nsOspfIfAuthKey,OCTET,read-create,,deprecated,,The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, nsOspfIfAuthKey always returns an Oc- tet String of length zero.
.1.3.6.1.4.1.3224.18.2.7.1.17,NETSCREEN-OSPF-MIB::nsOspfIfStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.3224.18.2.7.1.18,NETSCREEN-OSPF-MIB::nsOspfIfMulticastForwarding,INTEGER,read-create,,deprecated,blocked(1):multicast(2):unicast(3),The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting nsOspfMulticastForwarding to 0 effective- ly disables all multicast forwarding.
.1.3.6.1.4.1.3224.18.2.7.1.19,NETSCREEN-OSPF-MIB::nsOspfIfDemand,INTEGER,read-create,,deprecated,true(1):false(2),Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
.1.3.6.1.4.1.3224.18.2.7.1.20,NETSCREEN-OSPF-MIB::nsOspfIfAuthType,INTEGER,read-create,,deprecated,,The authentication type specified for an in- terface. Additional authentication types may be assigned locally.
.1.3.6.1.4.1.3224.18.2.7.1.21,NETSCREEN-OSPF-MIB::nsOspfIfVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.8,NETSCREEN-OSPF-MIB::nsOspfIfMetricTable,,not-accessible,,deprecated,,The TOS metrics for a non-virtual interface identified by the interface index.
.1.3.6.1.4.1.3224.18.2.8.1,NETSCREEN-OSPF-MIB::nsOspfIfMetricEntry,,not-accessible,nsOspfIfMetricIpAddress:nsOspfIfMetricAddressLessIf:nsOspfIfMetricTOS:nsOspfIfMetricVRID,deprecated,,A particular TOS metric for a non-virtual in- terface identified by the interface index.
.1.3.6.1.4.1.3224.18.2.8.1.1,NETSCREEN-OSPF-MIB::nsOspfIfMetricIpAddress,IpAddress,read-only,,deprecated,,The IP address of this OSPF interface. On row creation, this can be derived from the in- stance.
.1.3.6.1.4.1.3224.18.2.8.1.2,NETSCREEN-OSPF-MIB::nsOspfIfMetricAddressLessIf,Integer32,read-only,,deprecated,,For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for in- terfaces having no IP Address. On row crea- tion, this can be derived from the instance.
.1.3.6.1.4.1.3224.18.2.8.1.3,NETSCREEN-OSPF-MIB::nsOspfIfMetricTOS,Integer32,read-only,,deprecated,,The type of service metric being referenced. On row creation, this can be derived from the instance.
.1.3.6.1.4.1.3224.18.2.8.1.4,NETSCREEN-OSPF-MIB::nsOspfIfMetricValue,Integer32,read-create,,deprecated,,The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
.1.3.6.1.4.1.3224.18.2.8.1.5,NETSCREEN-OSPF-MIB::nsOspfIfMetricStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.3224.18.2.8.1.6,NETSCREEN-OSPF-MIB::nsOspfIfMetricVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.9,NETSCREEN-OSPF-MIB::nsOspfVirtIfTable,,not-accessible,,deprecated,,Information about this router's virtual inter- faces.
.1.3.6.1.4.1.3224.18.2.9.1,NETSCREEN-OSPF-MIB::nsOspfVirtIfEntry,,not-accessible,nsOspfVirtIfAreaId:nsOspfVirtIfNeighbor:nsOspfVirtIfVRID,deprecated,,Information about a single Virtual Interface.
.1.3.6.1.4.1.3224.18.2.9.1.1,NETSCREEN-OSPF-MIB::nsOspfVirtIfAreaId,IpAddress,read-only,,deprecated,,The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
.1.3.6.1.4.1.3224.18.2.9.1.2,NETSCREEN-OSPF-MIB::nsOspfVirtIfNeighbor,IpAddress,read-only,,deprecated,,The Router ID of the Virtual Neighbor.
.1.3.6.1.4.1.3224.18.2.9.1.3,NETSCREEN-OSPF-MIB::nsOspfVirtIfTransitDelay,Integer32,read-create,,deprecated,,The estimated number of seconds it takes to transmit a link- state update packet over this interface.
.1.3.6.1.4.1.3224.18.2.9.1.4,NETSCREEN-OSPF-MIB::nsOspfVirtIfRetransInterval,Integer32,read-create,,deprecated,,The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time.
.1.3.6.1.4.1.3224.18.2.9.1.5,NETSCREEN-OSPF-MIB::nsOspfVirtIfHelloInterval,Integer32,read-create,,deprecated,,The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.
.1.3.6.1.4.1.3224.18.2.9.1.6,NETSCREEN-OSPF-MIB::nsOspfVirtIfRtrDeadInterval,Integer32,read-create,,deprecated,,The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.
.1.3.6.1.4.1.3224.18.2.9.1.7,NETSCREEN-OSPF-MIB::nsOspfVirtIfState,INTEGER,read-only,,deprecated,down(1):pointToPoint(4),OSPF virtual interface states.
.1.3.6.1.4.1.3224.18.2.9.1.8,NETSCREEN-OSPF-MIB::nsOspfVirtIfEvents,Counter32,read-only,,deprecated,,The number of state changes or error events on this Virtual Link
.1.3.6.1.4.1.3224.18.2.9.1.9,NETSCREEN-OSPF-MIB::nsOspfVirtIfAuthKey,OCTET,read-create,,deprecated,,If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, nsOspfVifAuthKey always returns a string of length zero.
.1.3.6.1.4.1.3224.18.2.9.1.10,NETSCREEN-OSPF-MIB::nsOspfVirtIfStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.3224.18.2.9.1.11,NETSCREEN-OSPF-MIB::nsOspfVirtIfAuthType,INTEGER,read-create,,deprecated,,The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
.1.3.6.1.4.1.3224.18.2.9.1.12,NETSCREEN-OSPF-MIB::nsOspfVirtIfVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.10,NETSCREEN-OSPF-MIB::nsOspfNbrTable,,not-accessible,,deprecated,,A table of non-virtual neighbor information.
.1.3.6.1.4.1.3224.18.2.10.1,NETSCREEN-OSPF-MIB::nsOspfNbrEntry,,not-accessible,nsOspfNbrIpAddr:nsOspfNbrAddressLessIndex:nsOspfNbrVRID,deprecated,,The information regarding a single neighbor.
.1.3.6.1.4.1.3224.18.2.10.1.1,NETSCREEN-OSPF-MIB::nsOspfNbrIpAddr,IpAddress,read-only,,deprecated,,The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces.
.1.3.6.1.4.1.3224.18.2.10.1.2,NETSCREEN-OSPF-MIB::nsOspfNbrAddressLessIndex,Integer32,read-only,,deprecated,,On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.
.1.3.6.1.4.1.3224.18.2.10.1.3,NETSCREEN-OSPF-MIB::nsOspfNbrRtrId,IpAddress,read-only,,deprecated,,A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.4.1.3224.18.2.10.1.4,NETSCREEN-OSPF-MIB::nsOspfNbrOptions,Integer32,read-only,,deprecated,,A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.
.1.3.6.1.4.1.3224.18.2.10.1.5,NETSCREEN-OSPF-MIB::nsOspfNbrPriority,Integer32,read-create,,deprecated,,The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.
.1.3.6.1.4.1.3224.18.2.10.1.6,NETSCREEN-OSPF-MIB::nsOspfNbrState,INTEGER,read-only,,deprecated,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The State of the relationship with this Neigh- bor.
.1.3.6.1.4.1.3224.18.2.10.1.7,NETSCREEN-OSPF-MIB::nsOspfNbrEvents,Counter32,read-only,,deprecated,,The number of times this neighbor relationship has changed state, or an error has occurred.
.1.3.6.1.4.1.3224.18.2.10.1.8,NETSCREEN-OSPF-MIB::nsOspfNbrLsRetransQLen,Gauge32,read-only,,deprecated,,The deprecated length of the retransmission queue.
.1.3.6.1.4.1.3224.18.2.10.1.9,NETSCREEN-OSPF-MIB::nsOspfNbmaNbrStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.3224.18.2.10.1.10,NETSCREEN-OSPF-MIB::nsOspfNbmaNbrPermanence,INTEGER,read-only,,deprecated,dynamic(1):permanent(2),This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known.
.1.3.6.1.4.1.3224.18.2.10.1.11,NETSCREEN-OSPF-MIB::nsOspfNbrHelloSuppressed,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor
.1.3.6.1.4.1.3224.18.2.10.1.12,NETSCREEN-OSPF-MIB::nsOspfNbrVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.11,NETSCREEN-OSPF-MIB::nsOspfVirtNbrTable,,not-accessible,,deprecated,,A table of virtual neighbor information.
.1.3.6.1.4.1.3224.18.2.11.1,NETSCREEN-OSPF-MIB::nsOspfVirtNbrEntry,,not-accessible,nsOspfVirtNbrArea:nsOspfVirtNbrRtrId:nsOspfVirtNbrVRID,deprecated,,Virtual neighbor information.
.1.3.6.1.4.1.3224.18.2.11.1.1,NETSCREEN-OSPF-MIB::nsOspfVirtNbrArea,IpAddress,read-only,,deprecated,,The Transit Area Identifier.
.1.3.6.1.4.1.3224.18.2.11.1.2,NETSCREEN-OSPF-MIB::nsOspfVirtNbrRtrId,IpAddress,read-only,,deprecated,,A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.4.1.3224.18.2.11.1.3,NETSCREEN-OSPF-MIB::nsOspfVirtNbrIpAddr,IpAddress,read-only,,deprecated,,The IP address this Virtual Neighbor is us- ing.
.1.3.6.1.4.1.3224.18.2.11.1.4,NETSCREEN-OSPF-MIB::nsOspfVirtNbrOptions,Integer32,read-only,,deprecated,,A Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing.
.1.3.6.1.4.1.3224.18.2.11.1.5,NETSCREEN-OSPF-MIB::nsOspfVirtNbrState,INTEGER,read-only,,deprecated,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the Virtual Neighbor Relation- ship.
.1.3.6.1.4.1.3224.18.2.11.1.6,NETSCREEN-OSPF-MIB::nsOspfVirtNbrEvents,Counter32,read-only,,deprecated,,The number of times this virtual link has changed its state, or an error has occurred.
.1.3.6.1.4.1.3224.18.2.11.1.7,NETSCREEN-OSPF-MIB::nsOspfVirtNbrLsRetransQLen,Gauge32,read-only,,deprecated,,The deprecated length of the retransmission queue.
.1.3.6.1.4.1.3224.18.2.11.1.8,NETSCREEN-OSPF-MIB::nsOspfVirtNbrHelloSuppressed,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor
.1.3.6.1.4.1.3224.18.2.11.1.9,NETSCREEN-OSPF-MIB::nsOspfVirtNbrVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.12,NETSCREEN-OSPF-MIB::nsOspfExtLsdbTable,,not-accessible,,deprecated,,The OSPF Process's Links State Database.
.1.3.6.1.4.1.3224.18.2.12.1,NETSCREEN-OSPF-MIB::nsOspfExtLsdbEntry,,not-accessible,nsOspfExtLsdbType:nsOspfExtLsdbLsid:nsOspfExtLsdbRouterId:nsOspfExtLsdbVRID,deprecated,,A single Link State Advertisement.
.1.3.6.1.4.1.3224.18.2.12.1.1,NETSCREEN-OSPF-MIB::nsOspfExtLsdbType,INTEGER,read-only,,deprecated,asExternalLink(5),The type of the link state advertisement. Each link state type has a separate advertise- ment format.
.1.3.6.1.4.1.3224.18.2.12.1.2,NETSCREEN-OSPF-MIB::nsOspfExtLsdbLsid,IpAddress,read-only,,deprecated,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.3224.18.2.12.1.3,NETSCREEN-OSPF-MIB::nsOspfExtLsdbRouterId,IpAddress,read-only,,deprecated,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.3224.18.2.12.1.4,NETSCREEN-OSPF-MIB::nsOspfExtLsdbSequence,Integer32,read-only,,deprecated,,The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.3224.18.2.12.1.5,NETSCREEN-OSPF-MIB::nsOspfExtLsdbAge,Integer32,read-only,,deprecated,,This field is the age of the link state adver- tisement in seconds.
.1.3.6.1.4.1.3224.18.2.12.1.6,NETSCREEN-OSPF-MIB::nsOspfExtLsdbChecksum,Integer32,read-only,,deprecated,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.3224.18.2.12.1.7,NETSCREEN-OSPF-MIB::nsOspfExtLsdbAdvertisement,OCTET,read-only,,deprecated,,The entire Link State Advertisement, including its header.
.1.3.6.1.4.1.3224.18.2.12.1.8,NETSCREEN-OSPF-MIB::nsOspfExtLsdbVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.18.2.14,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateTable,,not-accessible,,deprecated,,A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range sub- sumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
.1.3.6.1.4.1.3224.18.2.14.1,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateEntry,,not-accessible,nsOspfAreaAggregateAreaID:nsOspfAreaAggregateLsdbType:nsOspfAreaAggregateNet:nsOspfAreaAggregateMask:nsOspfAreaAggregateVRID,deprecated,,A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are range configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
.1.3.6.1.4.1.3224.18.2.14.1.1,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateAreaID,IpAddress,read-only,,deprecated,,The Area the Address Aggregate is to be found within.
.1.3.6.1.4.1.3224.18.2.14.1.2,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateLsdbType,INTEGER,read-only,,deprecated,summaryLink(3):nssaExternalLink(7),The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.
.1.3.6.1.4.1.3224.18.2.14.1.3,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateNet,IpAddress,read-only,,deprecated,,The IP Address of the Net or Subnet indicated by the range.
.1.3.6.1.4.1.3224.18.2.14.1.4,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateMask,IpAddress,read-only,,deprecated,,The Subnet Mask that pertains to the Net or Subnet.
.1.3.6.1.4.1.3224.18.2.14.1.5,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
.1.3.6.1.4.1.3224.18.2.14.1.6,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateEffect,INTEGER,read-create,,deprecated,advertiseMatching(1):doNotAdvertiseMatching(2),Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.
.1.3.6.1.4.1.3224.18.2.14.1.7,NETSCREEN-OSPF-MIB::nsOspfAreaAggregateVRID,INTEGER,read-only,,deprecated,,Virtual Router ID
.1.3.6.1.4.1.3224.21,NETSCREEN-SMI::netscreenChasis,,,,,,
.1.3.6.1.4.1.3224.21.1,NETSCREEN-CHASSIS-MIB::nsPowerTable,,not-accessible,,current,,Information describing installed power supply modules and 
.1.3.6.1.4.1.3224.21.1.1,NETSCREEN-CHASSIS-MIB::nsPowerEntry,,not-accessible,nsPowerId,current,,Information describing one power supply module and its status
.1.3.6.1.4.1.3224.21.1.1.1,NETSCREEN-CHASSIS-MIB::nsPowerId,Integer32,read-only,,current,,A 32-bit integer uniquely identifying the power supply
.1.3.6.1.4.1.3224.21.1.1.2,NETSCREEN-CHASSIS-MIB::nsPowerStatus,Integer32,read-only,,current,,A 32-bit integer uniquely identifying the power supply module's status: 0. Fail 1. Good
.1.3.6.1.4.1.3224.21.1.1.3,NETSCREEN-CHASSIS-MIB::nsPowerDesc,OCTET,read-only,,current,,A description for the power supply module
.1.3.6.1.4.1.3224.21.2,NETSCREEN-CHASSIS-MIB::nsFanTable,,not-accessible,,current,,Information describing the installed Fan modules and their status
.1.3.6.1.4.1.3224.21.2.1,NETSCREEN-CHASSIS-MIB::nsFanEntry,,not-accessible,nsFanId,current,,Information describing one installed Fan module and its status
.1.3.6.1.4.1.3224.21.2.1.1,NETSCREEN-CHASSIS-MIB::nsFanId,Integer32,read-only,,current,,A 32-bit integer uniquely identifying the Fan id. At the time of 
.1.3.6.1.4.1.3224.21.2.1.2,NETSCREEN-CHASSIS-MIB::nsFanStatus,Integer32,read-only,,current,,A 32-bit integer uniquely identifying the Fan module's status: 0. Fail 1. Good 
.1.3.6.1.4.1.3224.21.2.1.3,NETSCREEN-CHASSIS-MIB::nsFanDesc,OCTET,read-only,,current,,A description for the Fan module
.1.3.6.1.4.1.3224.21.3,NETSCREEN-CHASSIS-MIB::sysBatteryStatus,Integer32,read-only,,current,,Information describing the installed Battery and its status: 1. Good 2. Error 
.1.3.6.1.4.1.3224.21.4,NETSCREEN-CHASSIS-MIB::nsTemperatureTable,,not-accessible,,current,,Information describing the temperature measured by each module
.1.3.6.1.4.1.3224.21.4.1,NETSCREEN-CHASSIS-MIB::nsTemperatureEntry,,not-accessible,nsTemperatureId,current,,The temperature measured by a module
.1.3.6.1.4.1.3224.21.4.1.1,NETSCREEN-CHASSIS-MIB::nsTemperatureId,Integer32,read-only,,current,,A 32-bit integer uniquely identifying temperature measured on a board or on a component e.g. CPU
.1.3.6.1.4.1.3224.21.4.1.2,NETSCREEN-CHASSIS-MIB::nsTemperatureSlotId,Integer32,read-only,,current,,A 32-bit integer uniquely identifying the slot where the temperature is measured. 
.1.3.6.1.4.1.3224.21.4.1.3,NETSCREEN-CHASSIS-MIB::nsTemperatureCur,Integer32,read-only,,current,,The current temperature measured by the module, unit is Celsius
.1.3.6.1.4.1.3224.21.4.1.4,NETSCREEN-CHASSIS-MIB::nsTemperatureDesc,OCTET,read-only,,current,,A description for the module
.1.3.6.1.4.1.3224.21.5,NETSCREEN-CHASSIS-MIB::nsSlotTable,,not-accessible,,current,,Information describing the installed management and traffic 
.1.3.6.1.4.1.3224.21.5.1,NETSCREEN-CHASSIS-MIB::nsSlotEntry,,not-accessible,nsSlotId:nsSubSlotId,current,,Information describing one installed module and its status
.1.3.6.1.4.1.3224.21.5.1.1,NETSCREEN-CHASSIS-MIB::nsSlotId,Integer32,read-only,,current,,A 32-bit integer uniquely identifying the slot id. The range 
.1.3.6.1.4.1.3224.21.5.1.2,NETSCREEN-CHASSIS-MIB::nsSlotType,OCTET,read-only,,current,,A description of the installed module
.1.3.6.1.4.1.3224.21.5.1.3,NETSCREEN-CHASSIS-MIB::nsSlotStatus,Integer32,read-only,,current,,Slot status
.1.3.6.1.4.1.3224.21.5.1.4,NETSCREEN-CHASSIS-MIB::nsSlotSN,OCTET,read-only,,current,,Serial Number of the module
.1.3.6.1.4.1.3224.50,NETSCREEN-SMI::netscreenSmiMibModule,,,,,,Modified SMI Mib Module
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
