.1.3,RFC1155-SMI::org,,,,,,
.1.3.6,RFC1155-SMI::dod,,,,,,
.1.3.6.1,RFC1155-SMI::internet,,,,,,
.1.3.6.1.1,RFC1155-SMI::directory,,,,,,
.1.3.6.1.2,RFC1155-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,RFC1213-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,RFC1213-MIB::sysDescr,OCTET,read-only,,mandatory,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.1.2,RFC1213-MIB::sysObjectID,OBJECT,read-only,,mandatory,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,RFC1213-MIB::sysUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,RFC1213-MIB::sysContact,OCTET,read-write,,mandatory,,The textual identification of the contact person for this managed node, together with information on how to contact this person.
.1.3.6.1.2.1.1.5,RFC1213-MIB::sysName,OCTET,read-write,,mandatory,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
.1.3.6.1.2.1.1.6,RFC1213-MIB::sysLocation,OCTET,read-write,,mandatory,,The physical location of this node (e.g., `telephone closet, 3rd floor').
.1.3.6.1.2.1.1.7,RFC1213-MIB::sysServices,INTEGER,read-only,,mandatory,,A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.2,RFC1213-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,RFC1213-MIB::ifNumber,INTEGER,read-only,,mandatory,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,RFC1213-MIB::ifTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,RFC1213-MIB::ifEntry,,not-accessible,ifIndex,mandatory,,An interface entry containing objects at the subnetwork layer and below for a particular interface.
.1.3.6.1.2.1.2.2.1.1,RFC1213-MIB::ifIndex,INTEGER,read-only,,mandatory,,A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,RFC1213-MIB::ifDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
.1.3.6.1.2.1.2.2.1.3,RFC1213-MIB::ifType,INTEGER,read-only,,mandatory,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
.1.3.6.1.2.1.2.2.1.4,RFC1213-MIB::ifMtu,INTEGER,read-only,,mandatory,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,RFC1213-MIB::ifSpeed,Gauge32,read-only,,mandatory,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
.1.3.6.1.2.1.2.2.1.6,RFC1213-MIB::ifPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,RFC1213-MIB::ifAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.8,RFC1213-MIB::ifOperStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.9,RFC1213-MIB::ifLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,RFC1213-MIB::ifInOctets,Counter32,read-only,,mandatory,,The total number of octets received on the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.11,RFC1213-MIB::ifInUcastPkts,Counter32,read-only,,mandatory,,The number of subnetwork-unicast packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.12,RFC1213-MIB::ifInNUcastPkts,Counter32,read-only,,mandatory,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.13,RFC1213-MIB::ifInDiscards,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.14,RFC1213-MIB::ifInErrors,Counter32,read-only,,mandatory,,The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.15,RFC1213-MIB::ifInUnknownProtos,Counter32,read-only,,mandatory,,The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.2.2.1.16,RFC1213-MIB::ifOutOctets,Counter32,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.17,RFC1213-MIB::ifOutUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.18,RFC1213-MIB::ifOutNUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.19,RFC1213-MIB::ifOutDiscards,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.20,RFC1213-MIB::ifOutErrors,Counter32,read-only,,mandatory,,The number of outbound packets that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.21,RFC1213-MIB::ifOutQLen,Gauge32,read-only,,mandatory,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,RFC1213-MIB::ifSpecific,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.11,RFC1213-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,RFC1213-MIB::snmpInPkts,Counter32,read-only,,mandatory,,The total number of Messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,RFC1213-MIB::snmpOutPkts,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,RFC1213-MIB::snmpInBadVersions,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,RFC1213-MIB::snmpInBadCommunityNames,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
.1.3.6.1.2.1.11.5,RFC1213-MIB::snmpInBadCommunityUses,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
.1.3.6.1.2.1.11.6,RFC1213-MIB::snmpInASNParseErrs,Counter32,read-only,,mandatory,,The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
.1.3.6.1.2.1.11.8,RFC1213-MIB::snmpInTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
.1.3.6.1.2.1.11.9,RFC1213-MIB::snmpInNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
.1.3.6.1.2.1.11.10,RFC1213-MIB::snmpInBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.11,RFC1213-MIB::snmpInReadOnlys,Counter32,read-only,,mandatory,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,RFC1213-MIB::snmpInGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.13,RFC1213-MIB::snmpInTotalReqVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,RFC1213-MIB::snmpInTotalSetVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,RFC1213-MIB::snmpInGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,RFC1213-MIB::snmpInGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,RFC1213-MIB::snmpInSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,RFC1213-MIB::snmpInGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,RFC1213-MIB::snmpInTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,RFC1213-MIB::snmpOutTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
.1.3.6.1.2.1.11.21,RFC1213-MIB::snmpOutNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
.1.3.6.1.2.1.11.22,RFC1213-MIB::snmpOutBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.24,RFC1213-MIB::snmpOutGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.25,RFC1213-MIB::snmpOutGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,RFC1213-MIB::snmpOutGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,RFC1213-MIB::snmpOutSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,RFC1213-MIB::snmpOutGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,RFC1213-MIB::snmpOutTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,RFC1213-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.2.1.76,INET-ADDRESS-MIB::inetAddressMIB,,,,,,This MIB module defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an IPv6 address, or a DNS domain name. This module also defines textual conventions for Internet port numbers, autonomous system numbers, and the length of an Internet address prefix. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4001, see the RFC itself for full legal notices.
.1.3.6.1.3,RFC1155-SMI::experimental,,,,,,
.1.3.6.1.4,RFC1155-SMI::private,,,,,,
.1.3.6.1.4.1,RFC1155-SMI::enterprises,,,,,,
.1.3.6.1.4.1.11863,TPLINK-MIB::tplink,,,,,,
.1.3.6.1.4.1.11863.1,TPLINK-MIB::switch,,,,,,
.1.3.6.1.4.1.11863.1.1,TPLINK-MIB::l2manageswitch,,,,,,
.1.3.6.1.4.1.11863.1.1.42,TPLINK-PRODUCTS-MIB::tlsl3226p-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.43,TPLINK-PRODUCTS-MIB::tlsl3218pe-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.45,TPLINK-PRODUCTS-MIB::tlsl3226pe-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.46,TPLINK-PRODUCTS-MIB::tlsl3452-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.47,TPLINK-PRODUCTS-MIB::tlsg3210-v3,,,,,,
.1.3.6.1.4.1.11863.1.1.48,TPLINK-PRODUCTS-MIB::tlsg3218-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.49,TPLINK-PRODUCTS-MIB::tlsl3226-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.50,TPLINK-PRODUCTS-MIB::tlsl3226-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.51,TPLINK-PRODUCTS-MIB::tlsg3452-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.53,TPLINK-PRODUCTS-MIB::tlsl3428-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.54,TPLINK-PRODUCTS-MIB::tlsl3218-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.55,TPLINK-PRODUCTS-MIB::tlsl3218-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.56,TPLINK-PRODUCTS-MIB::tlsg3226p-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.57,TPLINK-PRODUCTS-MIB::tlsg3226pe-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.58,TPLINK-PRODUCTS-MIB::tlsg3218pe-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.60,TPLINK-PRODUCTS-MIB::tlsl3210-v2,,,,,,
.1.3.6.1.4.1.11863.1.1.61,TPLINK-PRODUCTS-MIB::tlsl3109-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.62,TPLINK-PRODUCTS-MIB::tlsl3210pe-v1,,,,,,
.1.3.6.1.4.1.11863.1.1.63,TPLINK-PRODUCTS-MIB::tlsg3210pe-v1,,,,,,
.1.3.6.1.4.1.11863.1.2,TPLINK-MIB::l3manageswitch,,,,,,
.1.3.6.1.4.1.11863.1.2.52,TPLINK-PRODUCTS-MIB::tlsg5428-v2,,,,,,
.1.3.6.1.4.1.11863.1.2.64,TPLINK-PRODUCTS-MIB::tlsl5218-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.2.65,TPLINK-PRODUCTS-MIB::tlsl5210-v1,,,,,,
.1.3.6.1.4.1.11863.1.2.66,TPLINK-PRODUCTS-MIB::tlsl5428-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.2.67,TPLINK-PRODUCTS-MIB::tlsg5218-v1,,,,,,
.1.3.6.1.4.1.11863.1.2.68,TPLINK-PRODUCTS-MIB::tlsg5210-v1,,,,,,
.1.3.6.1.4.1.11863.1.2.71,TPLINK-PRODUCTS-MIB::tlsl5452-combo-v1,,,,,,
.1.3.6.1.4.1.11863.1.2.73,TPLINK-PRODUCTS-MIB::tlsg5452-v1,,,,,,
.1.3.6.1.4.1.11863.1.2.75,TPLINK-PRODUCTS-MIB::tlsg5820f-v1,,,,,,
.1.3.6.1.4.1.11863.2,TPLINK-MIB::router,,,,,,
.1.3.6.1.4.1.11863.3,TPLINK-MIB::wireless,,,,,,
.1.3.6.1.4.1.11863.4,TPLINK-MIB::adsl,,,,,,
.1.3.6.1.4.1.11863.5,TPLINK-MIB::tplinkProducts,,,,,,tplinkProducts is the root OBJECT IDENTIFIER from
.1.3.6.1.4.1.11863.5.1,TPLINK-PRODUCTS-MIB::tplink-tlsl5428,,,,,,
.1.3.6.1.4.1.11863.5.2,TPLINK-PRODUCTS-MIB::tplink-tlsl3452,,,,,,
.1.3.6.1.4.1.11863.5.3,TPLINK-PRODUCTS-MIB::tplink-tlsg3424,,,,,,
.1.3.6.1.4.1.11863.5.4,TPLINK-PRODUCTS-MIB::tplink-tlsg3216,,,,,,
.1.3.6.1.4.1.11863.5.5,TPLINK-PRODUCTS-MIB::tplink-tlsg3210,,,,,,
.1.3.6.1.4.1.11863.5.6,TPLINK-PRODUCTS-MIB::tplink-tlsl3428,,,,,,
.1.3.6.1.4.1.11863.5.7,TPLINK-PRODUCTS-MIB::tplink-tlsg5428,,,,,,
.1.3.6.1.4.1.11863.5.8,TPLINK-PRODUCTS-MIB::tplink-tlsg3424p,,,,,,
.1.3.6.1.4.1.11863.5.9,TPLINK-PRODUCTS-MIB::tplink-tlsg5412f,,,,,,
.1.3.6.1.4.1.11863.5.10,TPLINK-PRODUCTS-MIB::tplink-t2700-28tct,,,,,,
.1.3.6.1.4.1.11863.5.11,TPLINK-PRODUCTS-MIB::tplink-tlsl2428,,,,,,
.1.3.6.1.4.1.11863.5.12,TPLINK-PRODUCTS-MIB::tplink-tlsg2216,,,,,,
.1.3.6.1.4.1.11863.5.13,TPLINK-PRODUCTS-MIB::tplink-tlsg2424,,,,,,
.1.3.6.1.4.1.11863.5.14,TPLINK-PRODUCTS-MIB::tplink-tlsg5428cn,,,,,,
.1.3.6.1.4.1.11863.5.15,TPLINK-PRODUCTS-MIB::tplink-tlsg2452,,,,,,
.1.3.6.1.4.1.11863.5.16,TPLINK-PRODUCTS-MIB::tplink-tlsl2218,,,,,,
.1.3.6.1.4.1.11863.5.17,TPLINK-PRODUCTS-MIB::tplink-tlsg2424p,,,,,,
.1.3.6.1.4.1.11863.5.18,TPLINK-PRODUCTS-MIB::tplink-tlsg2210,,,,,,
.1.3.6.1.4.1.11863.5.19,TPLINK-PRODUCTS-MIB::tplink-tlsl2210,,,,,,
.1.3.6.1.4.1.11863.5.20,TPLINK-PRODUCTS-MIB::tplink-t3700g-28tq,,,,,,
.1.3.6.1.4.1.11863.5.21,TPLINK-PRODUCTS-MIB::tplink-tlsl2226p,,,,,,
.1.3.6.1.4.1.11863.5.22,TPLINK-PRODUCTS-MIB::tplink-tlsl2452,,,,,,
.1.3.6.1.4.1.11863.5.23,TPLINK-PRODUCTS-MIB::tplink-tlsl2218p,,,,,,
.1.3.6.1.4.1.11863.5.24,TPLINK-PRODUCTS-MIB::tplink-tlsg3424-ipv6,,,,,,
.1.3.6.1.4.1.11863.5.25,TPLINK-PRODUCTS-MIB::tplink-tlsg2008,,,,,,
.1.3.6.1.4.1.11863.5.26,TPLINK-PRODUCTS-MIB::tplink-tlsg2210p,,,,,,
.1.3.6.1.4.1.11863.5.27,TPLINK-PRODUCTS-MIB::tplink-t2700g-28tq,,,,,,
.1.3.6.1.4.1.11863.5.28,TPLINK-PRODUCTS-MIB::tplink-t1600g-28ts,,,,,,
.1.3.6.1.4.1.11863.5.29,TPLINK-PRODUCTS-MIB::tplink-t1600g-52ts,,,,,,
.1.3.6.1.4.1.11863.5.30,TPLINK-PRODUCTS-MIB::tplink-t3700g-54tq,,,,,,
.1.3.6.1.4.1.11863.5.31,TPLINK-PRODUCTS-MIB::tplink-t1700g-28tq,,,,,,
.1.3.6.1.4.1.11863.5.32,TPLINK-PRODUCTS-MIB::tplink-t1700g-52tq,,,,,,
.1.3.6.1.4.1.11863.5.33,TPLINK-PRODUCTS-MIB::tplink-t2600g-28ts,,,,,,
.1.3.6.1.4.1.11863.5.34,TPLINK-PRODUCTS-MIB::tplink-t2600g-52ts,,,,,,
.1.3.6.1.4.1.11863.5.37,TPLINK-PRODUCTS-MIB::tplink-t1600g-28ps,,,,,,
.1.3.6.1.4.1.11863.5.38,TPLINK-PRODUCTS-MIB::tplink-t1600g-52ps,,,,,,
.1.3.6.1.4.1.11863.5.39,TPLINK-PRODUCTS-MIB::tplink-tlsg2224p,,,,,,
.1.3.6.1.4.1.11863.5.40,TPLINK-PRODUCTS-MIB::tplink-tlsg3428,,,,,,
.1.3.6.1.4.1.11863.5.41,TPLINK-PRODUCTS-MIB::tplink-t1700x-16ts,,,,,,
.1.3.6.1.4.1.11863.5.44,TPLINK-PRODUCTS-MIB::tplink-t2500-28tc,,,,,,
.1.3.6.1.4.1.11863.5.59,TPLINK-PRODUCTS-MIB::tplink-t2500g-10ts,,,,,,
.1.3.6.1.4.1.11863.5.72,TPLINK-PRODUCTS-MIB::tplink-t2600g-18ts,,,,,,
.1.3.6.1.4.1.11863.5.74,TPLINK-PRODUCTS-MIB::tplink-t2600g-28mps,,,,,,
.1.3.6.1.4.1.11863.5.76,TPLINK-PRODUCTS-MIB::tplink-t1500g-8t,,,,,,
.1.3.6.1.4.1.11863.5.78,TPLINK-PRODUCTS-MIB::tplink-t1500g-10ps,,,,,,
.1.3.6.1.4.1.11863.5.80,TPLINK-PRODUCTS-MIB::tplink-t1500g-10mps,,,,,,
.1.3.6.1.4.1.11863.5.82,TPLINK-PRODUCTS-MIB::tplink-t1500-28tc,,,,,,
.1.3.6.1.4.1.11863.5.84,TPLINK-PRODUCTS-MIB::tplink-t1500-28pct,,,,,,
.1.3.6.1.4.1.11863.5.86,TPLINK-PRODUCTS-MIB::tplink-t1600g-18ts,,,,,,
.1.3.6.1.4.1.11863.6,TPLINK-MIB::tplinkMgmt,,,,,,tplinkMgmt is the main subtree for new mib development.
.1.3.6.1.4.1.11863.6.1,TPLINK-SYSINFO-MIB::tplinkSysInfoMIB,,,,,,This MIB module contain a collection of managed objects that get infomation of the system.
.1.3.6.1.4.1.11863.6.1.1,TPLINK-SYSINFO-MIB::tplinkSysInfoMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.1.1.1,TPLINK-SYSINFO-MIB::tpSysInfoDescription,OCTET,read-only,,current,,A textual description of the entity. This value
.1.3.6.1.4.1.11863.6.1.1.2,TPLINK-SYSINFO-MIB::tpSysInfoHostName,OCTET,read-write,,current,,An administratively-assigned name for this
.1.3.6.1.4.1.11863.6.1.1.3,TPLINK-SYSINFO-MIB::tpSysInfoLocation,OCTET,read-write,,current,,The physical location of this node (e.g.,
.1.3.6.1.4.1.11863.6.1.1.4,TPLINK-SYSINFO-MIB::tpSysInfoContact,OCTET,read-write,,current,,The textual identification of the contact person
.1.3.6.1.4.1.11863.6.1.1.5,TPLINK-SYSINFO-MIB::tpSysInfoHwVersion,OCTET,read-only,,current,,The hardWare version of the product.
.1.3.6.1.4.1.11863.6.1.1.6,TPLINK-SYSINFO-MIB::tpSysInfoSwVersion,OCTET,read-only,,current,,The softWare version of the product.
.1.3.6.1.4.1.11863.6.1.1.7,TPLINK-SYSINFO-MIB::tpSysInfoMacAddr,OCTET,read-only,,current,,The MAC address of the product.
.1.3.6.1.4.1.11863.6.1.1.8,TPLINK-SYSINFO-MIB::tpSysInfoUpTime,TimeTicks,read-only,,current,,The time (in hundredths of a second) since the
.1.3.6.1.4.1.11863.6.1.1.9,TPLINK-SYSINFO-MIB::tpSysInfoSerialPort,INTEGER,read-write,,current,,config the baud rate of the system
.1.3.6.1.4.1.11863.6.1.2,TPLINK-SYSINFO-MIB::tplinkSysInfoNotifications,,,,,,
.1.3.6.1.4.1.11863.6.2,TPLINK-SYSTIME-MIB::tplinkSysTimeMIB,,,,,,Private MIB for system time configuration.
.1.3.6.1.4.1.11863.6.2.1,TPLINK-SYSTIME-MIB::tplinkSysTimeMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.2.1.1,TPLINK-SYSTIME-MIB::tpSysTimeCurrentTime,OCTET,read-only,,current,,The current local date and time for the system.
.1.3.6.1.4.1.11863.6.2.1.2,TPLINK-SYSTIME-MIB::tpSysTimeSource,OCTET,read-only,,current,,The time source
.1.3.6.1.4.1.11863.6.2.1.3,TPLINK-SYSTIME-MIB::tpSysTimeMode,OCTET,read-only,,current,,the time mode
.1.3.6.1.4.1.11863.6.2.1.4,TPLINK-SYSTIME-MIB::tpSysTimeManualTimeConfig,,,,,,
.1.3.6.1.4.1.11863.6.2.1.4.1,TPLINK-SYSTIME-MIB::tpSysTimeManualTimeStatus,INTEGER,read-write,,current,disable(0):enable(1),0.disbale
.1.3.6.1.4.1.11863.6.2.1.4.2,TPLINK-SYSTIME-MIB::tpSysTimeTimeToSet,OCTET,read-write,,current,,A date-time specification.
.1.3.6.1.4.1.11863.6.2.1.5,TPLINK-SYSTIME-MIB::tpSysTimeNTPClientConfig,,,,,,
.1.3.6.1.4.1.11863.6.2.1.5.1,TPLINK-SYSTIME-MIB::tpSysTimeNTPClientStatus,INTEGER,read-write,,current,disable(0):enable(1),0.disbale
.1.3.6.1.4.1.11863.6.2.1.5.2,TPLINK-SYSTIME-MIB::tpSysTimeNTPTimezone,INTEGER,read-write,,current,utc-1200(-1200):utc-1100(-1100):utc-1000(-1000):utc-0900(-900):utc-0800(-800):utc-0700(-700):utc-0600(-600):utc-0500(-500):utc-0430(-450):utc-0400(-400):utc-0330(-350):utc-0300(-300):utc-0200(-200):utc-0100(-100):utc(0):utc0100(100):utc0200(200):utc0300(300):utc0330(350):utc0400(400):utc0430(450):utc0500(500):utc0530(550):utc0545(575):utc0600(600):utc0630(650):utc0700(700):utc0800(800):utc0900(900):utc0930(950):utc1000(1000):utc1100(1100):utc1200(1200):utc1300(1300),time zone select:
.1.3.6.1.4.1.11863.6.2.1.5.3,TPLINK-SYSTIME-MIB::tpSysTimeNTPServerAddr,IpAddress,read-write,,current,,The ip address of ntp server to fetch time,for example: 133.100.9.2.
.1.3.6.1.4.1.11863.6.2.1.5.4,TPLINK-SYSTIME-MIB::tpSysTimeNTPBackupServerAddr,IpAddress,read-write,,current,,The ip address of ntp backup server,for example: 139.78.100.163.
.1.3.6.1.4.1.11863.6.2.1.5.5,TPLINK-SYSTIME-MIB::tpSysTimeNTPUpdateRate,INTEGER,read-write,,current,,Specify the rate fetching time from ntp server
.1.3.6.1.4.1.11863.6.2.1.6,TPLINK-SYSTIME-MIB::tpSysTimeDstConfig,,,,,,
.1.3.6.1.4.1.11863.6.2.1.6.1,TPLINK-SYSTIME-MIB::tpSysTimeDstStatus,INTEGER,read-write,,current,disabled(0):predefined(1):recurring(2):date(3),An indication of whether the summertime feature
.1.3.6.1.4.1.11863.6.2.1.6.2,TPLINK-SYSTIME-MIB::tpSysTimeDstOffset,INTEGER,read-write,,current,,The value of this object indicates number of minutes to add
.1.3.6.1.4.1.11863.6.2.1.6.3,TPLINK-SYSTIME-MIB::tpSysTimeDstDateMode,,,,,,
.1.3.6.1.4.1.11863.6.2.1.6.3.1,TPLINK-SYSTIME-MIB::tpSysTimeDstDateTimeToStart,OCTET,read-write,,current,,Indicates summertime starts at this time.
.1.3.6.1.4.1.11863.6.2.1.6.3.2,TPLINK-SYSTIME-MIB::tpSysTimeDstDateTimeToEnd,OCTET,read-write,,current,,Indicates summertime ends at this time.
.1.3.6.1.4.1.11863.6.2.1.6.4,TPLINK-SYSTIME-MIB::tpSysTimeDstPredefinedMode,,,,,,
.1.3.6.1.4.1.11863.6.2.1.6.4.1,TPLINK-SYSTIME-MIB::tpSysTimeDstRegionSelected,INTEGER,read-write,,current,none(0):usa(1):australia(2):europe(3):new-Zealand(4),Indicates the region selected when the dstStatus object is set to predefined.
.1.3.6.1.4.1.11863.6.2.1.6.5,TPLINK-SYSTIME-MIB::tpSysTimeDstRecurringMode,,,,,,
.1.3.6.1.4.1.11863.6.2.1.6.5.1,TPLINK-SYSTIME-MIB::tpSysTimeDstRecurringToStart,OCTET,read-write,,current,,Indicates summertime starts at this time every year.
.1.3.6.1.4.1.11863.6.2.1.6.5.2,TPLINK-SYSTIME-MIB::tpSysTimeDstRecurringToEnd,OCTET,read-write,,current,,Indicates summertime ends at this time every year.
.1.3.6.1.4.1.11863.6.2.2,TPLINK-SYSTIME-MIB::tplinkSysTimeNotifications,,,,,,
.1.3.6.1.4.1.11863.6.3,TPLINK-SYSTOOL-MIB::tplinkSysToolMIB,,,,,,This MIB module contain a collection of managed objects that apply to network devices.
.1.3.6.1.4.1.11863.6.3.1,TPLINK-SYSTOOL-MIB::tplinkSysToolMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.3.1.1,TPLINK-SYSTOOL-MIB::tpSysToolReBoot,INTEGER,read-write,,current,notReBoot(0):reboot(1):reBootAndSave(2),this used to determine whether to reboot or not
.1.3.6.1.4.1.11863.6.3.1.2,TPLINK-SYSTOOL-MIB::tpSysToolReSet,INTEGER,read-write,,current,notReSet(0):reSet(1),this used to determine whether to reset or not
.1.3.6.1.4.1.11863.6.3.1.3,TPLINK-SYSTOOL-MIB::tpSysToolConfigSave,INTEGER,read-write,,current,commit(1),This object use to save the current config.
.1.3.6.1.4.1.11863.6.3.1.4,TPLINK-SYSTOOL-MIB::tpSysToolReBootSchedule,,,,,,
.1.3.6.1.4.1.11863.6.3.1.4.1,TPLINK-SYSTOOL-MIB::ScheduleStatus,INTEGER,read-only,,current,disable(0):enable(1),Reboot Schedule Status
.1.3.6.1.4.1.11863.6.3.1.4.2,TPLINK-SYSTOOL-MIB::ScheduleIn,INTEGER,read-create,,current,,this used to config the reboot schedule time interval
.1.3.6.1.4.1.11863.6.3.1.4.3,TPLINK-SYSTOOL-MIB::ScheduleAt,OCTET,read-create,,current,,this used to config the reboot schedule time
.1.3.6.1.4.1.11863.6.3.1.4.4,TPLINK-SYSTOOL-MIB::SaveBeforeReboot,INTEGER,read-create,,current,no(0):yes(1),Save the user config before reboot
.1.3.6.1.4.1.11863.6.3.1.4.5,TPLINK-SYSTOOL-MIB::ScheduleCancel,INTEGER,read-create,,current,commit(1),Cancel the reboot schedule
.1.3.6.1.4.1.11863.6.3.2,TPLINK-SYSTOOL-MIB::tplinkSysToolNotifications,,,,,,
.1.3.6.1.4.1.11863.6.3.2.1,TPLINK-SYSTOOL-MIB::flash,,,,,,A flash notification is sented when the flash has been modified.
.1.3.6.1.4.1.11863.6.3.2.2,TPLINK-SYSTOOL-MIB::power,,,,,,A power notification is sented when the Redundant Power Supply or the Power Supply Module status changed.
.1.3.6.1.4.1.11863.6.3.2.3,TPLINK-SYSTOOL-MIB::fan,,,,,,A fan notification is sented when the Fan working mode or status changed.
.1.3.6.1.4.1.11863.6.3.2.4,TPLINK-SYSTOOL-MIB::temperature,,,,,,A temperature notification is sented when the temperature alarm happens or cancels.
.1.3.6.1.4.1.11863.6.3.2.5,TPLINK-SYSTOOL-MIB::mCard,,,,,,A mCard notification is sented when the mCard is inserted or removed.
.1.3.6.1.4.1.11863.6.4,TPLINK-SYSMONITOR-MIB::tplinkSysMonitorMIB,,,,,,Private MIB for System Monitor.
.1.3.6.1.4.1.11863.6.4.1,TPLINK-SYSMONITOR-MIB::tplinkSysMonitorMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.4.1.1,TPLINK-SYSMONITOR-MIB::tpSysMonitorCpu,,,,,,
.1.3.6.1.4.1.11863.6.4.1.1.1,TPLINK-SYSMONITOR-MIB::tpSysMonitorCpuTable,,not-accessible,,current,,Displays the CPU utilization of all UNITs.
.1.3.6.1.4.1.11863.6.4.1.1.1.1,TPLINK-SYSMONITOR-MIB::tpSysMonitorCpuEntry,,not-accessible,tpSysMonitorCpuUnitNumber,current,,An entry contains of the information of CPU utilization.
.1.3.6.1.4.1.11863.6.4.1.1.1.1.1,TPLINK-SYSMONITOR-MIB::tpSysMonitorCpuUnitNumber,INTEGER,read-only,,current,,Displays the UNIT number.
.1.3.6.1.4.1.11863.6.4.1.1.1.1.2,TPLINK-SYSMONITOR-MIB::tpSysMonitorCpu5Seconds,INTEGER,read-only,,current,,Displays the CPU utilization in 5 seconds.
.1.3.6.1.4.1.11863.6.4.1.1.1.1.3,TPLINK-SYSMONITOR-MIB::tpSysMonitorCpu1Minute,INTEGER,read-only,,current,,Displays the CPU utilization in 1 minute.
.1.3.6.1.4.1.11863.6.4.1.1.1.1.4,TPLINK-SYSMONITOR-MIB::tpSysMonitorCpu5Minutes,INTEGER,read-only,,current,,Displays the CPU utilization in 5 minutes.
.1.3.6.1.4.1.11863.6.4.1.2,TPLINK-SYSMONITOR-MIB::tpSysMonitorMemory,,,,,,
.1.3.6.1.4.1.11863.6.4.1.2.1,TPLINK-SYSMONITOR-MIB::tpSysMonitorMemoryTable,,not-accessible,,current,,Displays the memory utilization of all UNITs.
.1.3.6.1.4.1.11863.6.4.1.2.1.1,TPLINK-SYSMONITOR-MIB::tpSysMonitorMemoryEntry,,not-accessible,tpSysMonitorMemoryUnitNumber,current,,An entry contains of the information of memory utilization.
.1.3.6.1.4.1.11863.6.4.1.2.1.1.1,TPLINK-SYSMONITOR-MIB::tpSysMonitorMemoryUnitNumber,INTEGER,read-only,,current,,Displays the UNIT number.
.1.3.6.1.4.1.11863.6.4.1.2.1.1.2,TPLINK-SYSMONITOR-MIB::tpSysMonitorMemoryUtilization,INTEGER,read-only,,current,,Displays the memory utilization.
.1.3.6.1.4.1.11863.6.4.2,TPLINK-SYSMONITOR-MIB::tplinkSysMonitorNotifications,,,,,,
.1.3.6.1.4.1.11863.6.4.2.1,TPLINK-SYSMONITOR-MIB::tpSysMonitorCpuOverLoading,,,,,,CPU utilization reached the threshold.
.1.3.6.1.4.1.11863.6.4.2.2,TPLINK-SYSMONITOR-MIB::tpSysMonitorMemoryOverLoading,,,,,,Memory utilization reached the threshold.
.1.3.6.1.4.1.11863.6.5,TPLINK-SSH-MIB::tplinkSshMIB,,,,,,Private MIB for SSH configuration.
.1.3.6.1.4.1.11863.6.5.1,TPLINK-SSH-MIB::tplinkSshMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.5.1.1,TPLINK-SSH-MIB::tpSshEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.2,TPLINK-SSH-MIB::tpSshProtocolV1Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.3,TPLINK-SSH-MIB::tpSshProtocolV2Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.4,TPLINK-SSH-MIB::tpSshQuietPeriod,INTEGER,read-write,,current,,quiet period(1-120 second)
.1.3.6.1.4.1.11863.6.5.1.5,TPLINK-SSH-MIB::tpSshMaxConnections,INTEGER,read-write,,current,,max connection(1-5)
.1.3.6.1.4.1.11863.6.5.1.6,TPLINK-SSH-MIB::tpSshEncryptAlgAES128Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.7,TPLINK-SSH-MIB::tpSshEncryptAlgAES192Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.8,TPLINK-SSH-MIB::tpSshEncryptAlgAES256Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.9,TPLINK-SSH-MIB::tpSshEncryptAlgBlowfishEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.10,TPLINK-SSH-MIB::tpSshEncryptAlgCast128Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.11,TPLINK-SSH-MIB::tpSshEncryptAlg3DESEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.12,TPLINK-SSH-MIB::tpSshInteAlgSHA1Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.1.13,TPLINK-SSH-MIB::tpSshInteAlgMD5Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.5.2,TPLINK-SSH-MIB::tplinkSshNotifications,,,,,,
.1.3.6.1.4.1.11863.6.6,TPLINK-IPADDR-MIB::tplinkIpAddrMIB,,,,,,Private MIB for ip address configuration.
.1.3.6.1.4.1.11863.6.6.1,TPLINK-IPADDR-MIB::tplinkIpAddrMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.6.1.1,TPLINK-IPADDR-MIB::tpInterfaceConfig,,,,,,
.1.3.6.1.4.1.11863.6.6.1.1.1,TPLINK-IPADDR-MIB::tpVlanInterfaceTable,,not-accessible,,current,,A list of VLAN interface entries. VLAN interface is a virtual interface which is working in the level 3, it is used to communicate between the VLAN in the level 3, and it is not a physical entity in the device. Each VLAN has a VLAN interface,and the VLAN interface can transmit the packets for the port which belong to this VLAN. In general,because the VLAN can isolate broadcast, each VLAN has a subnet address,and as a gateway of the subnet address, the VLAN interface can do the transmittance basic of IP address in level 3 for the packet which need to span the subnet address. 
.1.3.6.1.4.1.11863.6.6.1.1.1.1,TPLINK-IPADDR-MIB::tpVlanInterfaceConfigEntry,,not-accessible,tpVlanInterfaceVlanId:tpVlanInterfaceIp:tpVlanInterfaceSecondary,current,, The interface can be added or removed .
.1.3.6.1.4.1.11863.6.6.1.1.1.1.1,TPLINK-IPADDR-MIB::tpVlanInterfaceVlanId,INTEGER,read-only,,current,,The id of the VLAN interface,and it must be in the 802.1Q VLAN of the ingress port.
.1.3.6.1.4.1.11863.6.6.1.1.1.1.2,TPLINK-IPADDR-MIB::tpVlanInterfaceSecondary,INTEGER,read-only,,current,,If the ip address is secondary IP.
.1.3.6.1.4.1.11863.6.6.1.1.1.1.3,TPLINK-IPADDR-MIB::tpVlanInterfaceMode,INTEGER,read-create,,current,none(0):manual(1):dhcp(2):bootp(3),The IP address alloc-mode of VLAN interface.
.1.3.6.1.4.1.11863.6.6.1.1.1.1.4,TPLINK-IPADDR-MIB::tpVlanInterfaceIp,IpAddress,read-only,,current,,The IP address of the VLAN interface.
.1.3.6.1.4.1.11863.6.6.1.1.1.1.5,TPLINK-IPADDR-MIB::tpVlanInterfaceMsk,IpAddress,read-create,,current,,The IP mask of the VLAN interface.
.1.3.6.1.4.1.11863.6.6.1.1.1.1.6,TPLINK-IPADDR-MIB::tpVlanInterfaceName,OCTET,read-create,,current,, The name of the VLAN interface.
.1.3.6.1.4.1.11863.6.6.1.1.1.1.7,TPLINK-IPADDR-MIB::tpVlanInterfaceStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.6.1.1.2,TPLINK-IPADDR-MIB::tpLoopbackInterfaceTable,,not-accessible,,current,,A list of Loopback interface entries. Loopback interface is a virtual interface which purely software implemented, 
.1.3.6.1.4.1.11863.6.6.1.1.2.1,TPLINK-IPADDR-MIB::tpLoopbackInterfaceConfigEntry,,not-accessible,tpLoopbackInterfaceId:tpLoopbackInterfaceIp:tpLoopbackInterfaceSecondary,current,, The interface can be added or removed .
.1.3.6.1.4.1.11863.6.6.1.1.2.1.1,TPLINK-IPADDR-MIB::tpLoopbackInterfaceId,INTEGER,read-only,,current,,The id of the loopback interface (1-2147483647).
.1.3.6.1.4.1.11863.6.6.1.1.2.1.2,TPLINK-IPADDR-MIB::tpLoopbackInterfaceSecondary,INTEGER,read-only,,current,,If the ip address is secondary IP.
.1.3.6.1.4.1.11863.6.6.1.1.2.1.3,TPLINK-IPADDR-MIB::tpLoopbackInterfaceMode,INTEGER,read-create,,current,none(0):manual(1),The IP address alloc-mode of loopback interface.
.1.3.6.1.4.1.11863.6.6.1.1.2.1.4,TPLINK-IPADDR-MIB::tpLoopbackInterfaceIp,IpAddress,read-only,,current,,The IP address of the loopback interface.
.1.3.6.1.4.1.11863.6.6.1.1.2.1.5,TPLINK-IPADDR-MIB::tpLoopbackInterfaceMsk,IpAddress,read-create,,current,,The IP mask of the loopback interface.
.1.3.6.1.4.1.11863.6.6.1.1.2.1.6,TPLINK-IPADDR-MIB::tpLoopbackInterfaceName,OCTET,read-create,,current,, The name of the loopback interface.
.1.3.6.1.4.1.11863.6.6.1.1.2.1.7,TPLINK-IPADDR-MIB::tpLoopbackInterfaceStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), Action status.
.1.3.6.1.4.1.11863.6.6.1.1.3,TPLINK-IPADDR-MIB::tpRoutedPortTable,,not-accessible,,current,,A list of routed port. A routed port is special port mode which you can configure Layer 3 function like RIP, OSPF,
.1.3.6.1.4.1.11863.6.6.1.1.3.1,TPLINK-IPADDR-MIB::tpRoutedPortConfigEntry,,not-accessible,ifIndex:tpRoutedPortIp:tpRoutedPortSecondary,current,, The interface can be added or removed .
.1.3.6.1.4.1.11863.6.6.1.1.3.1.1,TPLINK-IPADDR-MIB::tpRoutedPortId,OCTET,read-only,,current,,The port id.
.1.3.6.1.4.1.11863.6.6.1.1.3.1.2,TPLINK-IPADDR-MIB::tpRoutedPortSecondary,INTEGER,read-only,,current,,If the ip address is secondary IP.
.1.3.6.1.4.1.11863.6.6.1.1.3.1.3,TPLINK-IPADDR-MIB::tpRoutedPortMode,INTEGER,read-create,,current,none(0):manual(1):dhcp(2):bootp(3),The IP address alloc-mode of the routed port.
.1.3.6.1.4.1.11863.6.6.1.1.3.1.4,TPLINK-IPADDR-MIB::tpRoutedPortIp,IpAddress,read-only,,current,,The IP address of the routed port.
.1.3.6.1.4.1.11863.6.6.1.1.3.1.5,TPLINK-IPADDR-MIB::tpRoutedPortMsk,IpAddress,read-create,,current,,The IP mask of the routed port.
.1.3.6.1.4.1.11863.6.6.1.1.3.1.6,TPLINK-IPADDR-MIB::tpRoutedPortName,OCTET,read-create,,current,, The name of the routed port.
.1.3.6.1.4.1.11863.6.6.1.1.3.1.7,TPLINK-IPADDR-MIB::tpRoutedPortStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), Action status.
.1.3.6.1.4.1.11863.6.6.1.1.4,TPLINK-IPADDR-MIB::tpPortChannelTable,,not-accessible,,current,,A list of port-channel interface entries. 
.1.3.6.1.4.1.11863.6.6.1.1.4.1,TPLINK-IPADDR-MIB::tpPortChannelConfigEntry,,not-accessible,tpPortChannelId:tpPortChannelIp:tpPortChannelSecondary,current,, The interface can be added or removed .
.1.3.6.1.4.1.11863.6.6.1.1.4.1.1,TPLINK-IPADDR-MIB::tpPortChannelId,INTEGER,read-only,,current,,The id of the port-channel interface.
.1.3.6.1.4.1.11863.6.6.1.1.4.1.2,TPLINK-IPADDR-MIB::tpPortChannelSecondary,INTEGER,read-only,,current,,If the ip address is secondary IP.
.1.3.6.1.4.1.11863.6.6.1.1.4.1.3,TPLINK-IPADDR-MIB::tpPortChannelMode,INTEGER,read-create,,current,none(0):manual(1):dhcp(2):bootp(3),The IP address alloc-mode of port-channel interface.
.1.3.6.1.4.1.11863.6.6.1.1.4.1.4,TPLINK-IPADDR-MIB::tpPortChannelIp,IpAddress,read-only,,current,,The IP address of the port-channel interface.
.1.3.6.1.4.1.11863.6.6.1.1.4.1.5,TPLINK-IPADDR-MIB::tpPortChannelMsk,IpAddress,read-create,,current,,The IP mask of the port-channel interface.
.1.3.6.1.4.1.11863.6.6.1.1.4.1.6,TPLINK-IPADDR-MIB::tpPortChannelName,OCTET,read-create,,current,, The name of the port-channel interface.
.1.3.6.1.4.1.11863.6.6.1.1.4.1.7,TPLINK-IPADDR-MIB::tpPortChannelStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.6.2,TPLINK-IPADDR-MIB::tplinkIpAddrNotifications,,,,,,
.1.3.6.1.4.1.11863.6.7,TPLINK-USERMANAGE-MIB::tplinkUserInfoMIB,,,,,,Implementation of the user manage is mandatory for the
.1.3.6.1.4.1.11863.6.7.1,TPLINK-USERMANAGE-MIB::tplinkUserManageMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.7.1.1,TPLINK-USERMANAGE-MIB::userInfoUserTable,,not-accessible,,current,,A list of user entries.
.1.3.6.1.4.1.11863.6.7.1.1.1,TPLINK-USERMANAGE-MIB::userInfoUserEntry,,not-accessible,userInfoUserName,current,,An entry contains of the information of a user.
.1.3.6.1.4.1.11863.6.7.1.1.1.1,TPLINK-USERMANAGE-MIB::userInfoUserName,OCTET,read-only,,current,,userName,range:1-16 bytes,'-' 'a-z' 'A-Z' '0-9'
.1.3.6.1.4.1.11863.6.7.1.1.1.2,TPLINK-USERMANAGE-MIB::userInfoUserType,INTEGER,read-create,,current,user(0):power-user(1):operator(2):admin(3),0. user 1. power_user
.1.3.6.1.4.1.11863.6.7.1.1.1.3,TPLINK-USERMANAGE-MIB::userInfoPasswordSecret,INTEGER,read-create,,current,cipher(0):simple(1),0. cipher 1. simple
.1.3.6.1.4.1.11863.6.7.1.1.1.4,TPLINK-USERMANAGE-MIB::userInfoOldPassword,OCTET,read-create,,current,,old password,if you want to change user's password, you must give the correct old password. range:1-31 bytes.
.1.3.6.1.4.1.11863.6.7.1.1.1.5,TPLINK-USERMANAGE-MIB::userInfoPassword,OCTET,read-create,,current,,password,range:1-31 bytes. If you want to change one user's password,you should ensure its password is same as confirmedPassword.
.1.3.6.1.4.1.11863.6.7.1.1.1.6,TPLINK-USERMANAGE-MIB::userInfoConfirmedPassword,OCTET,read-create,,current,,confirmed password,Retype the password,range:1-31 bytes.
.1.3.6.1.4.1.11863.6.7.1.1.1.7,TPLINK-USERMANAGE-MIB::userInfoUserStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following values are states: these values may be used as follow:  active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.  When you create a new user,the default password is admin.
.1.3.6.1.4.1.11863.6.7.2,TPLINK-USERMANAGE-MIB::tplinkUserManageMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.8,TPLINK-PORTCONFIG-MIB::tplinkPortConfigMIB,,,,,,This MIB module contain a collection of managed objects for port configuration.
.1.3.6.1.4.1.11863.6.8.1,TPLINK-PORTCONFIG-MIB::tplinkPortConfigMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.8.1.1,TPLINK-PORTCONFIG-MIB::tpPortConfigTable,,not-accessible,,current,,A table that contains information about every port. You can 
.1.3.6.1.4.1.11863.6.8.1.1.1,TPLINK-PORTCONFIG-MIB::tpPortConfigEntry,,not-accessible,ifIndex,current,,A list of information for each port of the device.
.1.3.6.1.4.1.11863.6.8.1.1.1.2,TPLINK-PORTCONFIG-MIB::tpPortConfigDescription,OCTET,read-write,,current,,This object indicate the description of the port.
.1.3.6.1.4.1.11863.6.8.1.1.1.3,TPLINK-PORTCONFIG-MIB::tpPortConfigStatus,INTEGER,read-write,,current,disable(0):enable(1),This object indicates the link status of the port. When enable 
.1.3.6.1.4.1.11863.6.8.1.1.1.4,TPLINK-PORTCONFIG-MIB::tpPortConfigSpeed,INTEGER,read-write,,current,speed-10Mbps(0):speed-100Mbps(1):speed-1Gigabps(2):speed-10Gigabps(3):auto(4),This object indicates the speed and duplex mode of the port. 
.1.3.6.1.4.1.11863.6.8.1.1.1.5,TPLINK-PORTCONFIG-MIB::tpPortConfigDuplex,INTEGER,read-write,,current,half(0):full(1):auto(2),This object indicates the speed and duplex mode of the port. 
.1.3.6.1.4.1.11863.6.8.1.1.1.6,TPLINK-PORTCONFIG-MIB::tpPortConfigFlowCtrl,INTEGER,read-write,,current,disable(0):enable(1),This object indicates the port status of the flow control. When
.1.3.6.1.4.1.11863.6.8.1.1.1.7,TPLINK-PORTCONFIG-MIB::tpPortConfigJumbo,INTEGER,read-write,,current,disable(0):enable(1),This object indicates the port status of the jumbo. 
.1.3.6.1.4.1.11863.6.8.1.1.1.8,TPLINK-PORTCONFIG-MIB::tpPortConfigLAG,OCTET,read-only,,current,,This object indicates the lag number of the port.
.1.3.6.1.4.1.11863.6.8.2,TPLINK-PORTCONFIG-MIB::tplinkPortConfigNotifications,,,,,,
.1.3.6.1.4.1.11863.6.9,TPLINK-LAG-MIB::tplinkLagMIB,,,,,,Private MIB for system time configuration.
.1.3.6.1.4.1.11863.6.9.1,TPLINK-LAG-MIB::tplinkLagMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.9.1.1,TPLINK-LAG-MIB::tplinkLagMIBGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.9.1.1.1,TPLINK-LAG-MIB::tpLagMaxEntryNum,INTEGER,read-only,,current,,This object indicates the max number of entries in the lag 
.1.3.6.1.4.1.11863.6.9.1.1.2,TPLINK-LAG-MIB::tpLagLoadBalance,INTEGER,read-write,,current,mac-source(0):mac-dest(1):mac-source-dest(2):ip-source(3):ip-dest(4):ip-source-dest(5),This object configures scope of Aggregate Arithmetic, which 
.1.3.6.1.4.1.11863.6.9.1.2,TPLINK-LAG-MIB::tplinkLagTable,,,,,,
.1.3.6.1.4.1.11863.6.9.1.2.3,TPLINK-LAG-MIB::tpLagTable,,not-accessible,,current,,A table that contains informatin about every static lag. 
.1.3.6.1.4.1.11863.6.9.1.2.3.1,TPLINK-LAG-MIB::tpLagEntry,,not-accessible,tpLagIndex,current,,A list of information for every lag.
.1.3.6.1.4.1.11863.6.9.1.2.3.1.1,TPLINK-LAG-MIB::tpLagIndex,INTEGER,read-only,,current,,This object indicates the index of the lag entry.
.1.3.6.1.4.1.11863.6.9.1.2.3.1.2,TPLINK-LAG-MIB::tpLagType,INTEGER,read-create,,current,on(1):active(2):passive(3),This object indicates the type of the lag entry.
.1.3.6.1.4.1.11863.6.9.1.2.3.1.3,TPLINK-LAG-MIB::tpLagMember,OCTET,read-create,,current,,This object indicates how many ports are included in this lag.
.1.3.6.1.4.1.11863.6.9.1.2.3.1.4,TPLINK-LAG-MIB::tpLagRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.11863.6.9.1.3,TPLINK-LAG-MIB::tplinkLagLacpManage,,,,,,
.1.3.6.1.4.1.11863.6.9.1.3.1,TPLINK-LAG-MIB::tpLacpSystemPriority,INTEGER,read-write,,current,,This object indicates the system priority of the lacp.
.1.3.6.1.4.1.11863.6.9.1.3.2,TPLINK-LAG-MIB::tpLacpTable,,not-accessible,,current,,A table that contains the lacp information of every port.
.1.3.6.1.4.1.11863.6.9.1.3.2.1,TPLINK-LAG-MIB::tpLacpEntry,,not-accessible,ifIndex,current,,A list of lacp information for every port.
.1.3.6.1.4.1.11863.6.9.1.3.2.1.1,TPLINK-LAG-MIB::tpLacpPort,OCTET,read-only,,current,,This object indicates the port number.
.1.3.6.1.4.1.11863.6.9.1.3.2.1.2,TPLINK-LAG-MIB::tpLacpAdminKey,INTEGER,read-only,,current,,This object indicates the Admin Key of the port. The member ports
.1.3.6.1.4.1.11863.6.9.1.3.2.1.3,TPLINK-LAG-MIB::tpLacpPortPriority,INTEGER,read-write,,current,,This object indicates the port priority of the port. This value 
.1.3.6.1.4.1.11863.6.9.1.3.2.1.4,TPLINK-LAG-MIB::tpLacpMode,INTEGER,read-only,,current,active(1):passive(0),This object indicates the lacp mode of the port.
.1.3.6.1.4.1.11863.6.9.1.3.2.1.5,TPLINK-LAG-MIB::tpLacpChan,OCTET,read-only,,current,,This object indicates the lag number of the port.
.1.3.6.1.4.1.11863.6.9.2,TPLINK-LAG-MIB::tplinkLagNotifications,,,,,,
.1.3.6.1.4.1.11863.6.10,TPLINK-L2BRIDGE-MIB::tplinkl2BridgeMIB,,,,,,This MIB module contain a collection of managed objects
.1.3.6.1.4.1.11863.6.10.1,TPLINK-L2BRIDGE-MIB::tplinkl2BridgeMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.10.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageStaticAddrCtrl,,,,,,
.1.3.6.1.4.1.11863.6.10.1.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageStaticAddrCtrlTable,,not-accessible,,current,,A list of static mac address entries.
.1.3.6.1.4.1.11863.6.10.1.1.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageStaticAddrCtrlEntry,,not-accessible,tpl2BridgeManageStaticMac:tpl2BridgeManageStaticVlanId,current,, The static address can be added or removed manually, independent of the aging time. In the stable networks, the static MAC address entries can facilitate the switch to  reduce broadcast packets and enhance the efficiency of packets forwarding remarkably.
.1.3.6.1.4.1.11863.6.10.1.1.1.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageStaticMac,OCTET,read-only,,current,,The static MAC Address
.1.3.6.1.4.1.11863.6.10.1.1.1.1.2,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageStaticVlanId,INTEGER,read-only,,current,,The corresponding VLAN ID of the MAC address.
.1.3.6.1.4.1.11863.6.10.1.1.1.1.3,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageStaticPort,OCTET,read-create,,current,,The corresponding Port number of the MAC address.
.1.3.6.1.4.1.11863.6.10.1.1.1.1.4,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageStaticStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow:  active(1),if the entry is being used. createAndGo(4),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.10.1.2,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynAddrCtrl,,,,,,
.1.3.6.1.4.1.11863.6.10.1.2.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynAddrCtrlAgingTime,INTEGER,read-write,,current,,Configure aging time for the dynamic address.Set 0 to disable auto aging.
.1.3.6.1.4.1.11863.6.10.1.2.2,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynAddrCtrlTable,,not-accessible,,current,,A list of dynamic MAC address entries.
.1.3.6.1.4.1.11863.6.10.1.2.2.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynAddrCtrlEntry,,not-accessible,tpl2BridgeManageDynMac:tpl2BridgeManageDynVlanId,current,, The dynamic address can be generated by the auto-learning mechanism of the switch.  The Dynamic Address Table can update automatically by auto-learning or aging out the  MAC address.
.1.3.6.1.4.1.11863.6.10.1.2.2.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynMac,OCTET,read-only,,current,,The dynamic MAC Address.
.1.3.6.1.4.1.11863.6.10.1.2.2.1.2,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynVlanId,INTEGER,read-only,,current,,Displays the corresponding VLAN ID of the MAC address.
.1.3.6.1.4.1.11863.6.10.1.2.2.1.3,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynPort,OCTET,read-only,,current,,The corresponding port number of the MAC address.
.1.3.6.1.4.1.11863.6.10.1.2.2.1.4,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynAgeStatus,INTEGER,read-only,,current,noAging(0):aging(1),The Aging Status of the MAC address.
.1.3.6.1.4.1.11863.6.10.1.2.2.1.5,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageDynStatus,INTEGER,read-write,,current,active(1):bind(4):destroy(6),active(1)......It's should be enable when the MAC address is exist.
.1.3.6.1.4.1.11863.6.10.1.3,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageFilterAddrCtrl,,,,,,
.1.3.6.1.4.1.11863.6.10.1.3.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageFilterCtrlTable,,not-accessible,,current,,A list of filter MAC address entries.
.1.3.6.1.4.1.11863.6.10.1.3.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageFilterCtrlEntry,,not-accessible,tpl2BridgeManageFilterMac:tpl2BridgeManageFilterVlanId,current,, The filtering address is to forbid the undesired package to be forwarded.  The filtering address can be added or removed manually, independent of the  aging time.
.1.3.6.1.4.1.11863.6.10.1.3.1.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageFilterMac,OCTET,read-only,,current,,The filtering MAC Address.
.1.3.6.1.4.1.11863.6.10.1.3.1.1.2,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageFilterVlanId,INTEGER,read-only,,current,,The corresponding VLAN ID.
.1.3.6.1.4.1.11863.6.10.1.3.1.1.3,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageFilterStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow:  active(1),if the entry is being used. createAndGo(4),not being used destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.10.1.4,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageVlanSecurityCtrl,,,,,,
.1.3.6.1.4.1.11863.6.10.1.4.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManagevlanSecurityTable,,not-accessible,,current,,A list of Fdb vlan security control entries.
.1.3.6.1.4.1.11863.6.10.1.4.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManagevlanSecEntry,,not-accessible,tpFdbVlanSecurityVid,current,, The mac vlan security entry is used to set vlan mac address learning config. 
.1.3.6.1.4.1.11863.6.10.1.4.1.1.1,TPLINK-L2BRIDGE-MIB::tpFdbVlanSecurityVid,INTEGER,read-only,,current,,The vlan id of this entry.
.1.3.6.1.4.1.11863.6.10.1.4.1.1.2,TPLINK-L2BRIDGE-MIB::tpFdbVlanSecurityMaxLearned,INTEGER,read-create,,current,,The max learned limit mac of this vlan security entry.
.1.3.6.1.4.1.11863.6.10.1.4.1.1.3,TPLINK-L2BRIDGE-MIB::tpFdbVlanSecurityRowStatus,INTEGER,read-create,,current,disable(0):drop(1):forward(2):createRequest(3):destroy(4),The status column has four defined values:
.1.3.6.1.4.1.11863.6.10.1.5,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageNotificationCtrl,,,,,,
.1.3.6.1.4.1.11863.6.10.1.5.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageNotificationGlobalStatus,INTEGER,read-write,,current,disable(0):enable(1),The mac address notification global status.
.1.3.6.1.4.1.11863.6.10.1.5.2,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageNotificationTableFullStatus,INTEGER,read-write,,current,disable(0):enable(1),The mac address notification when the table is full.
.1.3.6.1.4.1.11863.6.10.1.5.3,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageNotificationInterval,INTEGER,read-write,,current,,The mac address notification interval.
.1.3.6.1.4.1.11863.6.10.1.5.4,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageNotificationTable,,not-accessible,,current,,A list of port MAC address Notification setting.
.1.3.6.1.4.1.11863.6.10.1.5.4.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageNotificationCtrlEntry,,not-accessible,tpl2BridgeManagePortIndex,current,, The dynamic address can be generated by the auto-learning mechanism of the switch.  The Dynamic Address Table can update automatically by auto-learning or aging out the  MAC address.
.1.3.6.1.4.1.11863.6.10.1.5.4.1.1,TPLINK-L2BRIDGE-MIB::tpl2BridgeManagePortIndex,OCTET,read-only,,current,,This object indicates the port number.
.1.3.6.1.4.1.11863.6.10.1.5.4.1.2,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageLrnModeChg,INTEGER,read-write,,current,disable(0):enable(1),Displays the Learn mode change of the MAC address.
.1.3.6.1.4.1.11863.6.10.1.5.4.1.3,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageExceedMaxLrn,INTEGER,read-write,,current,disable(0):enable(1),Displays the exceed max learned of the MAC address.
.1.3.6.1.4.1.11863.6.10.1.5.4.1.4,TPLINK-L2BRIDGE-MIB::tpl2BridgeManageNewMacLrn,INTEGER,read-write,,current,disable(0):enable(1),Displays the new mac learned of the MAC address.
.1.3.6.1.4.1.11863.6.10.2,TPLINK-L2BRIDGE-MIB::tplinkl2BridgeNotifications,,,,,,
.1.3.6.1.4.1.11863.6.10.2.1,TPLINK-L2BRIDGE-MIB::fdbDynMacNew,,,,,,The switch has learned a new dynamic address.
.1.3.6.1.4.1.11863.6.10.2.2,TPLINK-L2BRIDGE-MIB::fdbStaticMacNew,,,,,,The switch has learned a new static address.
.1.3.6.1.4.1.11863.6.10.2.3,TPLINK-L2BRIDGE-MIB::fdbFilterMacNew,,,,,,The switch has learned a new filter address.
.1.3.6.1.4.1.11863.6.10.2.4,TPLINK-L2BRIDGE-MIB::fdbMacTableFull,,,,,,The switch's Address Table is full!
.1.3.6.1.4.1.11863.6.10.2.5,TPLINK-L2BRIDGE-MIB::fdbMacMaxLearnedNumExceed,,,,,,The l2BridgeManageStaticPort has learned the maximum number of address that it can learn.
.1.3.6.1.4.1.11863.6.10.2.6,TPLINK-L2BRIDGE-MIB::fdbMacLearnModeChange,,,,,,The l2BridgeManageDynPort has opened its portSecurity, and changes its learning mode.
.1.3.6.1.4.1.11863.6.11,TPLINK-PORTMIRROR-MIB::tplinkPortMirrorMIB,,,,,,The config of the port mirror.
.1.3.6.1.4.1.11863.6.11.1,TPLINK-PORTMIRROR-MIB::tplinkPortMirrorMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.11.1.1,TPLINK-PORTMIRROR-MIB::tpPortMirrorTable,,not-accessible,,current,,
.1.3.6.1.4.1.11863.6.11.1.1.1,TPLINK-PORTMIRROR-MIB::tpPortMirrorEntry,,not-accessible,tpPortMirrorSession,current,,
.1.3.6.1.4.1.11863.6.11.1.1.1.1,TPLINK-PORTMIRROR-MIB::tpPortMirrorSession,INTEGER,read-only,,current,,This object indicates the session number of the mirror group.
.1.3.6.1.4.1.11863.6.11.1.1.1.2,TPLINK-PORTMIRROR-MIB::tpPortMirrorDestination,OCTET,read-write,,current,, This object indicates a destination port which monitors specified 
.1.3.6.1.4.1.11863.6.11.1.1.1.3,TPLINK-PORTMIRROR-MIB::tpPortMirrorIngressSource,OCTET,read-write,,current,, This object indicates a list of the source ports. Any packets received 
.1.3.6.1.4.1.11863.6.11.1.1.1.4,TPLINK-PORTMIRROR-MIB::tpPortMirrorEgressSource,OCTET,read-write,,current,, This object indicates a list of the source ports. Any packets sended 
.1.3.6.1.4.1.11863.6.11.1.1.1.5,TPLINK-PORTMIRROR-MIB::tpPortMirrorBothSource,OCTET,read-write,,current,, This object indicates a list of the source ports. Any packets received 
.1.3.6.1.4.1.11863.6.11.1.1.1.6,TPLINK-PORTMIRROR-MIB::tpPortMirrorSessionState,INTEGER,read-write,,current,negative(1):active(2):clear(3), This object indicates the state of mirror session.If a session has been 
.1.3.6.1.4.1.11863.6.11.2,TPLINK-PORTMIRROR-MIB::tplinkPortMirrorMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.12,TPLINK-PORTSECURITY-MIB::tplinkPortSecurityMIB,,,,,,The config of the port security.
.1.3.6.1.4.1.11863.6.12.1,TPLINK-PORTSECURITY-MIB::tplinkPortSecurityMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.12.1.1,TPLINK-PORTSECURITY-MIB::tpPortSecurityTable,,not-accessible,,current,,A table that contains security information about every port.
.1.3.6.1.4.1.11863.6.12.1.1.1,TPLINK-PORTSECURITY-MIB::tpPortSecurityEntry,,not-accessible,ifIndex,current,,A list security information for each port of the device.
.1.3.6.1.4.1.11863.6.12.1.1.1.1,TPLINK-PORTSECURITY-MIB::tpPortSecurityPortIndex,OCTET,read-only,,current,,This object indicates the port number.
.1.3.6.1.4.1.11863.6.12.1.1.1.2,TPLINK-PORTSECURITY-MIB::tpPortSecurityMaxNum,INTEGER,read-write,,current,,This object indicates the maximum number of MAC addresses that
.1.3.6.1.4.1.11863.6.12.1.1.1.3,TPLINK-PORTSECURITY-MIB::tpPortSecurityLearnNum,INTEGER,read-only,,current,,This object indicates the number of MAC addresses that have been
.1.3.6.1.4.1.11863.6.12.1.1.1.4,TPLINK-PORTSECURITY-MIB::tpPortSecurityLearnMode,INTEGER,read-write,,current,dynamic(0):static(1):permanent(2),This object indicates the learn mode of the port.
.1.3.6.1.4.1.11863.6.12.1.1.1.5,TPLINK-PORTSECURITY-MIB::tpPortSecurityPortStatus,INTEGER,read-write,,current,disable(0):forward(1):drop(2),This object indicates the security feature of the port.
.1.3.6.1.4.1.11863.6.12.2,TPLINK-PORTSECURITY-MIB::tplinkPortSecurityNotifications,,,,,,
.1.3.6.1.4.1.11863.6.13,TPLINK-PORTISOLATION-MIB::tplinkPortIsolationMIB,,,,,,The config of the port isolation.
.1.3.6.1.4.1.11863.6.13.1,TPLINK-PORTISOLATION-MIB::tplinkPortIsolationMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.13.1.1,TPLINK-PORTISOLATION-MIB::portIsolationCtrlTable,,not-accessible,,current,,A list of port isolation.
.1.3.6.1.4.1.11863.6.13.1.1.1,TPLINK-PORTISOLATION-MIB::portIsolationCtrlEntry,,not-accessible,ifIndex,current,,The entry of the port isolation list .
.1.3.6.1.4.1.11863.6.13.1.1.1.1,TPLINK-PORTISOLATION-MIB::portIsolationPortId,OCTET,read-only,,current,,The port id.
.1.3.6.1.4.1.11863.6.13.1.1.1.2,TPLINK-PORTISOLATION-MIB::portIsolationForList,OCTET,read-write,,current,,The forward portlist,such as 1/0/1-5,1/0/9-11,1/0/16.
.1.3.6.1.4.1.11863.6.13.1.1.1.3,TPLINK-PORTISOLATION-MIB::portIsolationLagId,OCTET,read-only,,current,,The trunk id of the port.
.1.3.6.1.4.1.11863.6.13.2,TPLINK-PORTISOLATION-MIB::tplinkPortIsolationMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.14,TPLINK-DOT1Q-VLAN-MIB::tplinkDot1qVlanMIB,,,,,,VLAN (Virtual Local Area Network) technology is developed for
.1.3.6.1.4.1.11863.6.14.1,TPLINK-DOT1Q-VLAN-MIB::tplinkDot1qVlanMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.14.1.1,TPLINK-DOT1Q-VLAN-MIB::vlanPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.14.1.1.1,TPLINK-DOT1Q-VLAN-MIB::vlanPortConfigTable,,not-accessible,,current,,The switch provides three Link Types for the ports. Usually,
.1.3.6.1.4.1.11863.6.14.1.1.1.1,TPLINK-DOT1Q-VLAN-MIB::vlanPortConifgEntry,,not-accessible,ifIndex,current,,An entry contains of the information of a port parameter.
.1.3.6.1.4.1.11863.6.14.1.1.1.1.1,TPLINK-DOT1Q-VLAN-MIB::vlanPortNumber,OCTET,read-only,,current,,The port id.
.1.3.6.1.4.1.11863.6.14.1.1.1.1.2,TPLINK-DOT1Q-VLAN-MIB::vlanPortType,INTEGER,read-write,,current,access(0):trunk(1):general(2),0.ACCESS:The ACCESS port can be added in a single VLAN,and the
.1.3.6.1.4.1.11863.6.14.1.1.1.1.3,TPLINK-DOT1Q-VLAN-MIB::vlanPortPvid,INTEGER,read-write,,current,,Enter the PVID number of the port, 1-4094
.1.3.6.1.4.1.11863.6.14.1.1.1.1.4,TPLINK-DOT1Q-VLAN-MIB::vlanPortLag,OCTET,read-only,,current,,Displays the LAG to which the port belongs.
.1.3.6.1.4.1.11863.6.14.1.2,TPLINK-DOT1Q-VLAN-MIB::vlanConfig,,,,,,
.1.3.6.1.4.1.11863.6.14.1.2.1,TPLINK-DOT1Q-VLAN-MIB::vlanConfigTable,,not-accessible,,current,,Here you can view and modify the VLAN Table.
.1.3.6.1.4.1.11863.6.14.1.2.1.1,TPLINK-DOT1Q-VLAN-MIB::vlanConfigEntry,,not-accessible,dot1qVlanId,current,,An entry contains of the information of a vlan.
.1.3.6.1.4.1.11863.6.14.1.2.1.1.1,TPLINK-DOT1Q-VLAN-MIB::dot1qVlanId,INTEGER,read-create,,current,,Enter the ID number of VLAN,2-4094.
.1.3.6.1.4.1.11863.6.14.1.2.1.1.2,TPLINK-DOT1Q-VLAN-MIB::dot1qVlanDescription,OCTET,read-create,,current,,Give a description to the VLAN for identification,1-16 characters
.1.3.6.1.4.1.11863.6.14.1.2.1.1.3,TPLINK-DOT1Q-VLAN-MIB::vlanTagPortMemberAdd,OCTET,read-create,,current,,Enter the desired port to be a tag member of VLAN,The format of input
.1.3.6.1.4.1.11863.6.14.1.2.1.1.4,TPLINK-DOT1Q-VLAN-MIB::vlanUntagPortMemberAdd,OCTET,read-create,,current,,Enter the desired port to be a untag member of VLAN,The format of input
.1.3.6.1.4.1.11863.6.14.1.2.1.1.5,TPLINK-DOT1Q-VLAN-MIB::vlanPortMemberRemove,OCTET,read-create,,current,,Remove port member of vlan,The format of input port number shoud be like
.1.3.6.1.4.1.11863.6.14.1.2.1.1.6,TPLINK-DOT1Q-VLAN-MIB::dot1qVlanStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.14.2,TPLINK-DOT1Q-VLAN-MIB::tplinkDot1qVlanNotifications,,,,,,
.1.3.6.1.4.1.11863.6.14.2.1,TPLINK-DOT1Q-VLAN-MIB::vlanTableCreate,,,,,,
.1.3.6.1.4.1.11863.6.15,TPLINK-MAC-VLAN-MIB::tplinkMacVlanMIB,,,,,,Implementation of the macvlan is mandatory for the swtich.
.1.3.6.1.4.1.11863.6.15.1,TPLINK-MAC-VLAN-MIB::tplinkMacVlanMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.15.1.1,TPLINK-MAC-VLAN-MIB::macVlanConfig,,,,,,
.1.3.6.1.4.1.11863.6.15.1.1.1,TPLINK-MAC-VLAN-MIB::macVlanConfigTable,,not-accessible,,current,,MAC VLAN (Virtual Local Area Network) is the way to classify the 
.1.3.6.1.4.1.11863.6.15.1.1.1.1,TPLINK-MAC-VLAN-MIB::macVlanEntry,,not-accessible,macAddr,current,,An entry contains of the information of a mac vlan.
.1.3.6.1.4.1.11863.6.15.1.1.1.1.1,TPLINK-MAC-VLAN-MIB::macAddr,OCTET,read-create,,current,,Enter the MAC address.
.1.3.6.1.4.1.11863.6.15.1.1.1.1.2,TPLINK-MAC-VLAN-MIB::macDescription,OCTET,read-create,,current,,Give a description to the MAC address for identification,
.1.3.6.1.4.1.11863.6.15.1.1.1.1.3,TPLINK-MAC-VLAN-MIB::macVlanId,INTEGER,read-create,,current,,Enter the ID number of the MAC VLAN. This VLAN should be 
.1.3.6.1.4.1.11863.6.15.1.1.1.1.4,TPLINK-MAC-VLAN-MIB::macVlanStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.15.1.2,TPLINK-MAC-VLAN-MIB::macVlanPort,,,,,,
.1.3.6.1.4.1.11863.6.15.1.2.1,TPLINK-MAC-VLAN-MIB::macVlanPortTable,,not-accessible,,current,,Here you can enable the port for the MAC VLAN feature. 
.1.3.6.1.4.1.11863.6.15.1.2.1.1,TPLINK-MAC-VLAN-MIB::macVlanPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of a port.
.1.3.6.1.4.1.11863.6.15.1.2.1.1.1,TPLINK-MAC-VLAN-MIB::macVlanPortNumber,OCTET,read-only,,current,,The port id.
.1.3.6.1.4.1.11863.6.15.1.2.1.1.2,TPLINK-MAC-VLAN-MIB::macVlanPortEnable,INTEGER,read-create,,current,disable(0):enable(1),Select your desired port for MAC VLAN feature. All the ports 
.1.3.6.1.4.1.11863.6.15.1.2.1.1.3,TPLINK-MAC-VLAN-MIB::macVlanPortLag,OCTET,read-only,,current,,Displays the LAG to which the port belongs
.1.3.6.1.4.1.11863.6.15.2,TPLINK-MAC-VLAN-MIB::tplinkMacVlanNotifications,,,,,,
.1.3.6.1.4.1.11863.6.16,TPLINK-PROTOCOL-VLAN-MIB::tplinkProtocolVlanMIB,,,,,,Protocol VLAN (Virtual Local Area Network) is the way to classify
.1.3.6.1.4.1.11863.6.16.1,TPLINK-PROTOCOL-VLAN-MIB::tplinkProtocolVlanMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.16.1.1,TPLINK-PROTOCOL-VLAN-MIB::protocolTemplate,,,,,,
.1.3.6.1.4.1.11863.6.16.1.1.1,TPLINK-PROTOCOL-VLAN-MIB::protocolTemplateTable,,not-accessible,,current,,The Protocol Template should be created before configuring
.1.3.6.1.4.1.11863.6.16.1.1.1.1,TPLINK-PROTOCOL-VLAN-MIB::templateEntry,,not-accessible,templateProtocolName,current,,An entry contains of the information of a protocol template.
.1.3.6.1.4.1.11863.6.16.1.1.1.1.1,TPLINK-PROTOCOL-VLAN-MIB::templateProtocolName,OCTET,read-create,,current,,Give a name for the Protocol Template,1-8 characters
.1.3.6.1.4.1.11863.6.16.1.1.1.1.2,TPLINK-PROTOCOL-VLAN-MIB::templateEtherType,OCTET,read-create,,current,,Enter the Ethernet protocol type field in the protocol template,
.1.3.6.1.4.1.11863.6.16.1.1.1.1.3,TPLINK-PROTOCOL-VLAN-MIB::templateFrameType,INTEGER,read-create,,current,ethernet8023(0):ethernetII(1):snap(2):llc(3),
.1.3.6.1.4.1.11863.6.16.1.1.1.1.4,TPLINK-PROTOCOL-VLAN-MIB::templateStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.16.1.2,TPLINK-PROTOCOL-VLAN-MIB::protocolGroup,,,,,,
.1.3.6.1.4.1.11863.6.16.1.2.1,TPLINK-PROTOCOL-VLAN-MIB::protocolGroupTable,,not-accessible,,current,,Here you can configure the Protocol VLAN.
.1.3.6.1.4.1.11863.6.16.1.2.1.1,TPLINK-PROTOCOL-VLAN-MIB::protocolVlanEntry,,not-accessible,protocolName,current,,An entry contains of the information of a protocol vlan.
.1.3.6.1.4.1.11863.6.16.1.2.1.1.1,TPLINK-PROTOCOL-VLAN-MIB::protocolName,OCTET,read-only,,current,,Displays the protocol template name of the VLAN.
.1.3.6.1.4.1.11863.6.16.1.2.1.1.2,TPLINK-PROTOCOL-VLAN-MIB::protocolVlanId,INTEGER,read-create,,current,,Enter the ID number of the Protocol VLAN. This VLAN should
.1.3.6.1.4.1.11863.6.16.1.2.1.1.3,TPLINK-PROTOCOL-VLAN-MIB::protocolPortMember,OCTET,read-create,,current,,Protocol Vlan port member.
.1.3.6.1.4.1.11863.6.16.1.2.1.1.4,TPLINK-PROTOCOL-VLAN-MIB::protocolVlanStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.16.2,TPLINK-PROTOCOL-VLAN-MIB::tplinkProtocolVlanNotifications,,,,,,
.1.3.6.1.4.1.11863.6.17,TPLINK-VLAN-QINQ-MIB::tplinkQinqVlanMIB,,,,,,VLAN-VPN (Virtual Private Network) function, the implement of a simple and flexible Layer 2
.1.3.6.1.4.1.11863.6.17.1,TPLINK-VLAN-QINQ-MIB::tplinkQinqVlanMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.17.1.1,TPLINK-VLAN-QINQ-MIB::vpnConfigVpnMode,INTEGER,read-write,,current,disable(0):enable(1),Allows you to Enable/Disable the VLAN-VPN function.
.1.3.6.1.4.1.11863.6.17.1.2,TPLINK-VLAN-QINQ-MIB::vpnConfigTpid,OCTET,read-write,,current,,Enter the global TPID (Tag protocol identifier).
.1.3.6.1.4.1.11863.6.17.1.3,TPLINK-VLAN-QINQ-MIB::vpnConfigUplinkPortTable,,not-accessible,,current,,A list of upLink port.
.1.3.6.1.4.1.11863.6.17.1.3.1,TPLINK-VLAN-QINQ-MIB::vpnConfigUplinkPortEntry,,not-accessible,ifIndex,current,,An entry contains of the port for uplink.
.1.3.6.1.4.1.11863.6.17.1.3.1.1,TPLINK-VLAN-QINQ-MIB::vpnConfigUplinkPortEnable,INTEGER,read-write,,current,disable(0):enable(1),Select the desired port as the VPN Up-link port.
.1.3.6.1.4.1.11863.6.17.1.4,TPLINK-VLAN-QINQ-MIB::vpnConfigPort,,,,,,
.1.3.6.1.4.1.11863.6.17.1.4.1,TPLINK-VLAN-QINQ-MIB::vpnConfigPortEnableTable,,not-accessible,,current,,A list of port status.
.1.3.6.1.4.1.11863.6.17.1.4.1.1,TPLINK-VLAN-QINQ-MIB::vpnConfigPortEnableEntry,,not-accessible,ifIndex,current,,An entry contains of the port status.
.1.3.6.1.4.1.11863.6.17.1.4.1.1.1,TPLINK-VLAN-QINQ-MIB::vpnConfigPortEnable,INTEGER,read-write,,current,disable(0):enable(1),Enable VLAN VPN of the select port.
.1.3.6.1.4.1.11863.6.17.1.5,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMapping,,,,,,
.1.3.6.1.4.1.11863.6.17.1.5.1,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMappingMode,INTEGER,read-write,,current,disable(0):enable(1),Allows you to Enable/Disable the VLAN mapping function.
.1.3.6.1.4.1.11863.6.17.1.5.2,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMappingTable,,not-accessible,,current,,A list of vlan Mapping.
.1.3.6.1.4.1.11863.6.17.1.5.2.1,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMappingEntry,,not-accessible,vpnConfigVlanMappingCVlan:vpnConfigVlanMappingPort,current,,An entry contains of the port for user auth .
.1.3.6.1.4.1.11863.6.17.1.5.2.1.1,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMappingPort,OCTET,read-create,,current,,
.1.3.6.1.4.1.11863.6.17.1.5.2.1.2,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMappingCVlan,INTEGER,read-create,,current,,Enter the ID number of the Customer VLAN.
.1.3.6.1.4.1.11863.6.17.1.5.2.1.3,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMappingSPVlan,INTEGER,read-create,,current,,Enter the ID number of the Service Provider VLAN.
.1.3.6.1.4.1.11863.6.17.1.5.2.1.4,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMappingDesc,OCTET,read-create,,current,,Give a description to the VLAN Mapping entry or leave it blank.
.1.3.6.1.4.1.11863.6.17.1.5.2.1.5,TPLINK-VLAN-QINQ-MIB::vpnConfigVlanMappingStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following values are states:
.1.3.6.1.4.1.11863.6.17.2,TPLINK-VLAN-QINQ-MIB::tplinkQinqVlanMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.18,TPLINK-PRIVATE-VLAN-MIB::tplinkPrivateVlanMIB,,,,,,Implementation of the privlan is mandatory for the swtich.
.1.3.6.1.4.1.11863.6.18.1,TPLINK-PRIVATE-VLAN-MIB::tplinkPrivateVlanMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.18.1.1,TPLINK-PRIVATE-VLAN-MIB::privateVlanTable,,not-accessible,,current,,A list of private VLAN control entries.
.1.3.6.1.4.1.11863.6.18.1.1.1,TPLINK-PRIVATE-VLAN-MIB::privateVlanEntry,,not-accessible,secondaryVlan,current,,PVLAN (Private Virtual Local Area Network)  technology is developed for saving VLANs of uplink devices and decrease broadcast message . Private VLAN can enhance performance by  conserving bandwidth, and improve security by decreasing broadcast .
.1.3.6.1.4.1.11863.6.18.1.1.1.1,TPLINK-PRIVATE-VLAN-MIB::secondaryVlan,INTEGER,read-create,,current,,The ID number of the Secondary VLAN.
.1.3.6.1.4.1.11863.6.18.1.1.1.2,TPLINK-PRIVATE-VLAN-MIB::primaryVlan,INTEGER,read-create,,current,,The ID number of the Primary VLAN.
.1.3.6.1.4.1.11863.6.18.1.1.1.3,TPLINK-PRIVATE-VLAN-MIB::privateVlanPort,OCTET,read-only,,current,,Displays the Port number of the Private VLAN.
.1.3.6.1.4.1.11863.6.18.1.1.1.4,TPLINK-PRIVATE-VLAN-MIB::privateVlanType,INTEGER,read-create,,current,community(1):isolated(2),The Port Type for the port. 1. promiscuous 2. host
.1.3.6.1.4.1.11863.6.18.1.1.1.5,TPLINK-PRIVATE-VLAN-MIB::privateVlanStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.18.1.2,TPLINK-PRIVATE-VLAN-MIB::privateVlanPortTable,,not-accessible,,current,,A list of vlan port type control entries.
.1.3.6.1.4.1.11863.6.18.1.2.1,TPLINK-PRIVATE-VLAN-MIB::privateVlanPortEntry,,not-accessible,ifIndex,current,,The PVLAN provides two Port Types  for the ports, Promiscuous and Host.  Usually, the Promiscuous port is used  to connect to uplink devices while the  Host port is used to connect to the he  terminal hosts, such as PC and Server.
.1.3.6.1.4.1.11863.6.18.1.2.1.1,TPLINK-PRIVATE-VLAN-MIB::portNum,OCTET,read-only,,current,,The port id.
.1.3.6.1.4.1.11863.6.18.1.2.1.2,TPLINK-PRIVATE-VLAN-MIB::portType,INTEGER,read-create,,current,promiscuous(1):host(2),The Port Type for the port. 1. promiscuous 2. host
.1.3.6.1.4.1.11863.6.18.1.2.1.3,TPLINK-PRIVATE-VLAN-MIB::portConfigPrimaryVlan,INTEGER,read-create,,current,,Specify the Primary VLAN the port belongs to.
.1.3.6.1.4.1.11863.6.18.1.2.1.4,TPLINK-PRIVATE-VLAN-MIB::portConfigsecondaryVlan,INTEGER,read-create,,current,,Specify the Secondary VLAN the port belongs to.
.1.3.6.1.4.1.11863.6.18.1.2.1.5,TPLINK-PRIVATE-VLAN-MIB::vlanPortStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.18.2,TPLINK-PRIVATE-VLAN-MIB::tplinkPrivateVlanMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.19,TPLINK-VOICEVLAN-MIB::tplinkVoiceVlanMIB,,,,,,Private MIB for voice vlan configuration.
.1.3.6.1.4.1.11863.6.19.1,TPLINK-VOICEVLAN-MIB::tplinkVoiceVlanMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.19.1.1,TPLINK-VOICEVLAN-MIB::voiceVlanGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.19.1.1.1,TPLINK-VOICEVLAN-MIB::voiceVlanGlobalEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Voice VLAN function. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.19.1.1.2,TPLINK-VOICEVLAN-MIB::voiceVlanId,INTEGER,read-write,,current,,Enter the VLAN ID of the voice VLAN,2-4094.
.1.3.6.1.4.1.11863.6.19.1.1.3,TPLINK-VOICEVLAN-MIB::voiceVlanAgingTime,INTEGER,read-write,,current,,Specifies the living time of the member port in auto mode  after the OUI address is aging out,1-43200 minute.
.1.3.6.1.4.1.11863.6.19.1.1.4,TPLINK-VOICEVLAN-MIB::voiceVlanPriority,INTEGER,read-write,,current,cos0(0):cos1(1):cos2(2):cos3(3):cos4(4):cos5(5):cos6(6):cos7(7),Select the priority of the port when sending voice data.
.1.3.6.1.4.1.11863.6.19.1.2,TPLINK-VOICEVLAN-MIB::voiceVlanPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.19.1.2.1,TPLINK-VOICEVLAN-MIB::voiceVlanPortTable,,not-accessible,,current,,Here you can configure the parameters of the ports in the voice VLAN..
.1.3.6.1.4.1.11863.6.19.1.2.1.1,TPLINK-VOICEVLAN-MIB::voiceVlanPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of port param.
.1.3.6.1.4.1.11863.6.19.1.2.1.1.1,TPLINK-VOICEVLAN-MIB::voiceVlanPortNumber,OCTET,read-only,,current,,Displays the port number of the Switch.
.1.3.6.1.4.1.11863.6.19.1.2.1.1.2,TPLINK-VOICEVLAN-MIB::voiceVlanPortMode,INTEGER,read-write,,current,manual(0):auto(1),Select the mode for the port to join the voice VLAN. 0. manual: In this mode, you can manually add a port to the  voice VLAN or remove a port from the voice VLAN 1. auto: In this mode, the switch automatically adds a port  to the voice VLAN or removes a port from the voice VLAN by  checking whether the port receives voice data or not.
.1.3.6.1.4.1.11863.6.19.1.2.1.1.3,TPLINK-VOICEVLAN-MIB::voiceVlanPortSecurity,INTEGER,read-write,,current,disable(0):enable(1),Configure the security mode for forwarding packets. 0. disable:All packets are forwarded. 1. enable:Only voice data are forwarded.
.1.3.6.1.4.1.11863.6.19.1.2.1.1.4,TPLINK-VOICEVLAN-MIB::voiceVlanPortStatus,INTEGER,read-only,,current,inactive(0):active(1),Displays the state of the port in the current voice VLAN. 0. inactive 1. active
.1.3.6.1.4.1.11863.6.19.1.2.1.1.5,TPLINK-VOICEVLAN-MIB::voiceVlanPortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.19.1.3,TPLINK-VOICEVLAN-MIB::voiceVlanOuiConfig,,,,,,
.1.3.6.1.4.1.11863.6.19.1.3.1,TPLINK-VOICEVLAN-MIB::voiceVlanOuiConfigTable,,not-accessible,,current,,The switch determines whether a received packet is a voice  packet by checking its source MAC address. If the source  MAC addresses of packets comply with the OUI (organizationally  unique identifier) addresses configured by the system, the packets  are recognized as voice packets and transmitted in voice VLAN.
.1.3.6.1.4.1.11863.6.19.1.3.1.1,TPLINK-VOICEVLAN-MIB::voiceVlanOuiConfigEntry,,not-accessible,voiceVlanOui,current,,An entry contains of the information of a voice vlan oui.
.1.3.6.1.4.1.11863.6.19.1.3.1.1.1,TPLINK-VOICEVLAN-MIB::voiceVlanOui,OCTET,read-create,,current,,Enter the OUI address of the voice device.
.1.3.6.1.4.1.11863.6.19.1.3.1.1.2,TPLINK-VOICEVLAN-MIB::voiceVlanOuiMask,OCTET,read-create,,current,,Enter the OUI address mask of the voice device.
.1.3.6.1.4.1.11863.6.19.1.3.1.1.3,TPLINK-VOICEVLAN-MIB::voiceVlanDescription,OCTET,read-create,,current,,Give a description to the OUI for identification,1-16 characters.
.1.3.6.1.4.1.11863.6.19.1.3.1.1.4,TPLINK-VOICEVLAN-MIB::voiceVlanRowStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.19.2,TPLINK-VOICEVLAN-MIB::tplinkVoiceVlanMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.20,TPLINK-GVRP-MIB::tplinkGvrpMIB,,,,,,GVRP (GARP VLAN registration protocol) is an implementation of GARP  (generic attribute registration protocol). GVRP allows the switch to  automatically add or remove the VLANs via the dynamic VLAN registration  information and propagate the local VLAN registration information to  other switches, without having to individually configure each VLAN.
.1.3.6.1.4.1.11863.6.20.1,TPLINK-GVRP-MIB::tplinkGvrpMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.20.1.1,TPLINK-GVRP-MIB::tpGvrpGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.20.1.1.1,TPLINK-GVRP-MIB::tpGvrpGlobalEnable,INTEGER,read-write,,current,disable(0):enable(1),Allows you to Enable/Disable the GVRP function.  0. disable  1. enable
.1.3.6.1.4.1.11863.6.20.1.2,TPLINK-GVRP-MIB::tpGvrpPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.20.1.2.1,TPLINK-GVRP-MIB::tpGvrpPortTable,,not-accessible,,current,,Here you can set the GVRP parameters for each port.
.1.3.6.1.4.1.11863.6.20.1.2.1.1,TPLINK-GVRP-MIB::tpGvrpPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of a port.
.1.3.6.1.4.1.11863.6.20.1.2.1.1.1,TPLINK-GVRP-MIB::tpGvrpPortNumber,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.20.1.2.1.1.2,TPLINK-GVRP-MIB::tpGvrpPortEnable,INTEGER,read-write,,current,disable(0):enable(1),Enable/Disable the GVRP feature for the port. The port type  should be set to TRUNK before enabling the GVRP feature. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.20.1.2.1.1.3,TPLINK-GVRP-MIB::tpGvrpPortRegistration,INTEGER,read-write,,current,normal(0):fixed(1):forbidden(2),Select the Registration Mode for the port. 0. NORMAL:In this mode, a port can dynamically register/deregister a VLAN and propagate the dynamic/static VLAN information. 1. FIXED:In this mode, a port cannot register/deregister a VLAN dynamically. It only propagates static VLAN information. 2. FORBIDDEN:In this mode, a port cannot register/deregister VLANs.  It only propagates VLAN 1 information.
.1.3.6.1.4.1.11863.6.20.1.2.1.1.4,TPLINK-GVRP-MIB::tpGvrpLeaveAllTimer,INTEGER,read-write,,current,,Once the LeaveAll Timer is set, the port with GVRP enabled  can send a LeaveAll message after the timer times out, so  that other GARP ports can re-register all the attribute information.  After that, the LeaveAll timer will start to begin a new cycle.  The LeaveAll Timer ranges from 1000 to 30000 centiseconds and could  be devided exactly by 5.
.1.3.6.1.4.1.11863.6.20.1.2.1.1.5,TPLINK-GVRP-MIB::tpGvrpJoinTimer,INTEGER,read-write,,current,,To guarantee the transmission of the Join messages, a GARP  port sends each Join message two times. The Join Timer is  used to define the interval between the two sending operations  of each Join message. The Join Timer ranges from 20 to 1000  centiseconds and could be devided exactly by 5.
.1.3.6.1.4.1.11863.6.20.1.2.1.1.6,TPLINK-GVRP-MIB::tpGvrpLeaveTimer,INTEGER,read-write,,current,,Once the Leave Timer is set, the GARP port receiving a  Leave message will start its Leave timer, and unregister  the attribute information if it does not receive a Join  message again before the timer times out. The Leave Timer  ranges from 60 to 3000 centiseconds and could be devided  exactly by 5. (leave timer)*10 <= leaveAll timer, (join timer)*2 <= leave timer.
.1.3.6.1.4.1.11863.6.20.1.2.1.1.7,TPLINK-GVRP-MIB::tpGvrpPortLag,OCTET,read-only,,current,,Displays the LAG to which the port belongs.
.1.3.6.1.4.1.11863.6.20.2,TPLINK-GVRP-MIB::tplinkGvrpNotifications,,,,,,
.1.3.6.1.4.1.11863.6.21,TPLINK-SPANNING-TREE-MIB::tplinkSpanningTreeMIB,,,,,,Private MIB for Spanning-Tree.
.1.3.6.1.4.1.11863.6.21.1,TPLINK-SPANNING-TREE-MIB::tplinkSpanningTreeMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.21.1.1,TPLINK-SPANNING-TREE-MIB::tpStpBasicCfg,,,,,,
.1.3.6.1.4.1.11863.6.21.1.1.1,TPLINK-SPANNING-TREE-MIB::tpStpBasicGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.21.1.1.1.1,TPLINK-SPANNING-TREE-MIB::tpStpEnable,INTEGER,read-write,,current,disable(0):enable(1),Spanning Tree Protocol. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.21.1.1.1.2,TPLINK-SPANNING-TREE-MIB::tpRstpEnable,INTEGER,read-write,,current,disable(0):enable(1),Rapid Spanning Tree Protocol. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.21.1.1.1.3,TPLINK-SPANNING-TREE-MIB::tpMstpEnable,INTEGER,read-write,,current,disable(0):enable(1),Multiple Spanning Tree Protocol. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.21.1.1.2,TPLINK-SPANNING-TREE-MIB::tpStpBasicParamConfig,,,,,,
.1.3.6.1.4.1.11863.6.21.1.1.2.1,TPLINK-SPANNING-TREE-MIB::tpStpCistPriority,INTEGER,read-write,,current,,Enter a value from 0 to 61440 to specify the priority  of the switch for comparison in the CIST. CIST priority  is an important criterion on determining the root bridge.  In the same condition, the switch with the highest priority  will be chosen as the root bridge. The lower value has the  higher priority. The value could be devided exactly by 4096.
.1.3.6.1.4.1.11863.6.21.1.1.2.2,TPLINK-SPANNING-TREE-MIB::tpStpHelloTime,INTEGER,read-write,,current,,Enter a value from 1 to 10 in seconds to specify the  interval to send BPDU packets. It is used to test the  links. (tpStpHelloTime+1)*2<=tpStpAgingTime.
.1.3.6.1.4.1.11863.6.21.1.1.2.3,TPLINK-SPANNING-TREE-MIB::tpStpAgingTime,INTEGER,read-write,,current,,Enter a value from 6 to 40 in seconds to specify the  maximum time the switch can wait without receiving a  BPDU before attempting to reconfigure. (tpStpHelloTime+1)*2<=tpStpAgingTime.
.1.3.6.1.4.1.11863.6.21.1.1.2.4,TPLINK-SPANNING-TREE-MIB::tpStpForwardDelay,INTEGER,read-write,,current,,Enter a value from 4 to 30 in seconds to specify the  time for the port to transit its state after the network  topology is changed. stpAgingTime<=(stpForwardDelay-1)*2.
.1.3.6.1.4.1.11863.6.21.1.1.2.5,TPLINK-SPANNING-TREE-MIB::tpStpHoldCount,INTEGER,read-write,,current,,Enter a value from 1 to 20 to set the maximum number of  BPDU packets transmitted per Hello Time interval.
.1.3.6.1.4.1.11863.6.21.1.1.2.6,TPLINK-SPANNING-TREE-MIB::tpStpMaxHops,INTEGER,read-write,,current,,Enter a value from 1 to 40 to set the maximum number of  hops that occur in a specific region before the BPDU is  discarded.
.1.3.6.1.4.1.11863.6.21.1.1.3,TPLINK-SPANNING-TREE-MIB::tpStpInfo,,,,,,
.1.3.6.1.4.1.11863.6.21.1.1.3.1,TPLINK-SPANNING-TREE-MIB::tpStpEnableStatus,INTEGER,read-only,,current,disable(0):enable(1),0. disable  1. enable
.1.3.6.1.4.1.11863.6.21.1.1.3.2,TPLINK-SPANNING-TREE-MIB::tpStpMode,INTEGER,read-only,,current,stp(1):rstp(2):mstp(3),1. stp 2. rstp 3. mstp
.1.3.6.1.4.1.11863.6.21.1.1.3.3,TPLINK-SPANNING-TREE-MIB::tpStpLocalBridge,OCTET,read-only,,current,,Local bridge.
.1.3.6.1.4.1.11863.6.21.1.1.3.4,TPLINK-SPANNING-TREE-MIB::tpStpCISTRoot,OCTET,read-only,,current,,CIST Root.
.1.3.6.1.4.1.11863.6.21.1.1.3.5,TPLINK-SPANNING-TREE-MIB::tpStpExPathCost,INTEGER,read-only,,current,,External Path cost.
.1.3.6.1.4.1.11863.6.21.1.1.3.6,TPLINK-SPANNING-TREE-MIB::tpStpRegionRoot,OCTET,read-only,,current,,Region Root.
.1.3.6.1.4.1.11863.6.21.1.1.3.7,TPLINK-SPANNING-TREE-MIB::tpStpInPathCost,INTEGER,read-only,,current,,Internal Path cost.
.1.3.6.1.4.1.11863.6.21.1.1.3.8,TPLINK-SPANNING-TREE-MIB::tpStpDesignatedBridge,OCTET,read-only,,current,,Designated Bridge.
.1.3.6.1.4.1.11863.6.21.1.1.3.9,TPLINK-SPANNING-TREE-MIB::tpStpRootPort,INTEGER,read-only,,current,,RootPort.
.1.3.6.1.4.1.11863.6.21.1.1.3.10,TPLINK-SPANNING-TREE-MIB::tpStpLastTopologyChangeTime,OCTET,read-only,,current,,LastTopologyChangeTime.
.1.3.6.1.4.1.11863.6.21.1.1.3.11,TPLINK-SPANNING-TREE-MIB::tpStpTopologyChangeCounter,INTEGER,read-only,,current,,TopologyChangeCounter.
.1.3.6.1.4.1.11863.6.21.1.2,TPLINK-SPANNING-TREE-MIB::tpStpPortCfg,,,,,,
.1.3.6.1.4.1.11863.6.21.1.2.1,TPLINK-SPANNING-TREE-MIB::tpStpPortConfigTable,,not-accessible,,current,,Here you can configure the parameters of the ports for  comparison in the CIST and the common parameters of all  Instances. And you can view the status of the ports in the  CIST. CIST (Common and Internal Spanning Tree) is the spanning  tree in a switched network, connecting all devices in the network.
.1.3.6.1.4.1.11863.6.21.1.2.1.1,TPLINK-SPANNING-TREE-MIB::tpStpPortConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of a port.
.1.3.6.1.4.1.11863.6.21.1.2.1.1.1,TPLINK-SPANNING-TREE-MIB::tpStpPortNumber,OCTET,read-only,,current,,Displays the port number of the switch.
.1.3.6.1.4.1.11863.6.21.1.2.1.1.2,TPLINK-SPANNING-TREE-MIB::tpStpPortEnable,INTEGER,read-write,,current,disable(0):enable(1):errPort(2),Select Enable /Disable STP function for the desired port. 0. Disable 1. Enable 2. ErrPort
.1.3.6.1.4.1.11863.6.21.1.2.1.1.3,TPLINK-SPANNING-TREE-MIB::tpStpPortPriority,INTEGER,read-write,,current,,Enter a value from 0 to 240 divisible by 16. Port priority  is an important criterion on determining the root port.  In the same condition, the port with the highest priority will be  chosen as the root port. The lower value has the higher priority.
.1.3.6.1.4.1.11863.6.21.1.2.1.1.4,TPLINK-SPANNING-TREE-MIB::tpStpPortExPathCost,INTEGER,read-write,,current,,ExPath Cost is used to choose the path and calculate the path costs  of ports in different MST regions. It is an important criterion on  determining the root port. The lower value has the higher priority. automatic when value is zero. Make sure that Path Cost ranges from 0 to 2000000.
.1.3.6.1.4.1.11863.6.21.1.2.1.1.5,TPLINK-SPANNING-TREE-MIB::tpStpPortInPathCost,INTEGER,read-write,,current,,InPath Cost is used to choose the path and calculate the path costs  of ports in an MST region. It is an important criterion on determining  the root port. The lower value has the higher priority. Make sure that Path Cost ranges from 0 to 2000000.
.1.3.6.1.4.1.11863.6.21.1.2.1.1.6,TPLINK-SPANNING-TREE-MIB::tpStpEdgePortStatus,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Edge Port. The edge port can transit  its state from blocking to forwarding rapidly without waiting  for forward delay. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.21.1.2.1.1.7,TPLINK-SPANNING-TREE-MIB::tpStpPointToPointStatus,INTEGER,read-write,,current,auto(0):force-enable(1):force-disable(2),Select the P2P link status. If the two ports in the P2P link are  root port or designated port, they can transit their states to  forwarding rapidly to reduce the unnecessary forward delay. 0. auto 1. force enable 2. force disable
.1.3.6.1.4.1.11863.6.21.1.2.1.1.8,TPLINK-SPANNING-TREE-MIB::tpStpPortMCheck,INTEGER,read-write,,current,unChange(0):enable(1),Select Enable to perform MCheck operation on the port. Unchange means no MCheck operation. 0. unChange 1. enable
.1.3.6.1.4.1.11863.6.21.1.2.1.1.9,TPLINK-SPANNING-TREE-MIB::tpStpPortStpVersion,INTEGER,read-only,,current,n-a(0):stp(1):rstp(2):mstp(3),Displays the STP version of the port. 1. stp 2. rstp 3. mstp
.1.3.6.1.4.1.11863.6.21.1.2.1.1.10,TPLINK-SPANNING-TREE-MIB::tpStpPortRole,INTEGER,read-only,,current,n-a(0):disabled(1):alternate(2):backup(3):designated(4):root(5):master(6),Displays the role of the port played in the STP Instance. 1.Disable:Indicates the port that is not participating in the STP. 2.Alternate:Indicates the port that can be a backup port of a root or master port. 3.Backup:Indicates the port that is the backup port of a designated port.  4.Designated:Indicates the port that forwards packets to a downstream network  segment or switch. 5.root:Indicates the port that has the lowest path cost from this bridge to the  Root Bridge and forwards packets to the root.  6.Master:Indicates the port that connects a MST region to the common root.  The path from the master port to the common root is the shortest path between  this MST region and the common root.
.1.3.6.1.4.1.11863.6.21.1.2.1.1.11,TPLINK-SPANNING-TREE-MIB::tpStpPortStatus,INTEGER,read-only,,current,n-a(0):disconnected(1):blocking(2):learning(3):forwarding(4),Displays the working status of the port. 1.Disconnected: In this status the port is not participating in the STP. 2.Blocking: In this status the port can only receive BPDU packets. 3.Learning: In this status the port can receive/send BPDU packets and learn MAC address.  4.Forwarding: In this status the port can receive/forward data, receive/send BPDU packets  as well as learn MAC address. 
.1.3.6.1.4.1.11863.6.21.1.2.1.1.12,TPLINK-SPANNING-TREE-MIB::tpStpPortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.21.1.3,TPLINK-SPANNING-TREE-MIB::tpStpInstanceCfg,,,,,,
.1.3.6.1.4.1.11863.6.21.1.3.1,TPLINK-SPANNING-TREE-MIB::tpMstpRegionConfig,,,,,,
.1.3.6.1.4.1.11863.6.21.1.3.1.1,TPLINK-SPANNING-TREE-MIB::tpMstpRegionName,OCTET,read-write,,current,,Create a name for MST region identification using up to 32 characters.
.1.3.6.1.4.1.11863.6.21.1.3.1.2,TPLINK-SPANNING-TREE-MIB::tpMstpRevision,INTEGER,read-write,,current,,Enter the revision from 0 to 65535 for MST region identification.
.1.3.6.1.4.1.11863.6.21.1.3.2,TPLINK-SPANNING-TREE-MIB::tpMstpInstanceConfigTable,,not-accessible,,current,,Here you can set the VLAN-to-spanning-tree mapping configuration.
.1.3.6.1.4.1.11863.6.21.1.3.2.1,TPLINK-SPANNING-TREE-MIB::tpMstpInstanceConfigEntry,,not-accessible,tpMstpInstanceId,current,,An entry contains of the mstp instance.
.1.3.6.1.4.1.11863.6.21.1.3.2.1.1,TPLINK-SPANNING-TREE-MIB::tpMstpInstanceId,INTEGER,read-only,,current,,Displays Instance ID of the switch,0 representative CIST. 
.1.3.6.1.4.1.11863.6.21.1.3.2.1.2,TPLINK-SPANNING-TREE-MIB::tpMstpInstanceEnable,INTEGER,read-only,,current,disable(0):enable(1),Displays status of the instance. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.21.1.3.2.1.3,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePriority,INTEGER,read-write,,current,,Enter the priority of the switch in the instance. It is an  important criterion on determining if the switch will be  chosen as the root bridge in the specific instance.Make sure  that Priority ranges from 0 to 61440 and could be divided  exactly by 4096
.1.3.6.1.4.1.11863.6.21.1.3.2.1.4,TPLINK-SPANNING-TREE-MIB::tpMstpInstanceVlanId,OCTET,read-write,,current,,Enter the desired VLAN ID. After modification here, the new VLAN  ID will be added to the corresponding instance ID and the previous  VLAN ID won't be replaced.The format of input VLAN ID shoud be like  '1,3,4-7,11-30' in the range from 1 to 4094.
.1.3.6.1.4.1.11863.6.21.1.3.2.1.5,TPLINK-SPANNING-TREE-MIB::tpMstpClearInstanceVlanId,INTEGER,read-write,,current,clear(1),This object use to clear instance's vlan id.The cleared VLAN ID will  be automatically mapped to the CIST.
.1.3.6.1.4.1.11863.6.21.1.3.3,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortConfigTable,,not-accessible,,current,,A port can play different roles in different spanning tree instance.  Here you can configure the parameters of the ports in different  instance IDs as well as view status of the ports in the specified instance. 
.1.3.6.1.4.1.11863.6.21.1.3.3.1,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortConfigEntry,,not-accessible,tpMstpInstancePortConfigId:ifIndex,current,,An entry contains of the mstp instance port config.
.1.3.6.1.4.1.11863.6.21.1.3.3.1.1,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortConfigId,INTEGER,read-only,,current,,The instance ID for its port configuration, 1-8.
.1.3.6.1.4.1.11863.6.21.1.3.3.1.2,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortNumber,OCTET,read-only,,current,,Displays the port number of the switch.
.1.3.6.1.4.1.11863.6.21.1.3.3.1.3,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortPriority,INTEGER,read-write,,current,,Enter the priority of the port in the instance. It is an  important criterion on determining if the port will be chosen  as the root port by the device connected to this port.
.1.3.6.1.4.1.11863.6.21.1.3.3.1.4,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortPathCost,INTEGER,read-write,,current,,Path Cost is used to choose the path and calculate the path costs  of ports in an MST region. It is an important criterion on determining  the root port. The lower value has the higher priority.
.1.3.6.1.4.1.11863.6.21.1.3.3.1.5,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortRole,INTEGER,read-only,,current,n-a(0):disabled(1):alternate(2):backup(3):designated(4):root(5):master(6),Displays the role of the port played in the STP Instance. 1. Disable 2. Alternate 3. Backup 4. Designated 5. root 6. Master
.1.3.6.1.4.1.11863.6.21.1.3.3.1.6,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortStatus,INTEGER,read-only,,current,n-a(0):disabled(1):blocking(2):learning(3):forwarding(4),Displays the working status of the port. 1. Disable 2. Blocking 3. Learning 4. Forwarding
.1.3.6.1.4.1.11863.6.21.1.3.3.1.7,TPLINK-SPANNING-TREE-MIB::tpMstpInstancePortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.21.1.4,TPLINK-SPANNING-TREE-MIB::tpStpSecurityCfg,,,,,,
.1.3.6.1.4.1.11863.6.21.1.4.1,TPLINK-SPANNING-TREE-MIB::tpStpPortDefendTable,,not-accessible,,current,,Port defend function is to prevent the devices from any  malicious attack against STP features..
.1.3.6.1.4.1.11863.6.21.1.4.1.1,TPLINK-SPANNING-TREE-MIB::tpStpPortDefendEntry,,not-accessible,ifIndex,current,,An entry contains of the information of a port protection.
.1.3.6.1.4.1.11863.6.21.1.4.1.1.1,TPLINK-SPANNING-TREE-MIB::tpStpDefendPortNumber,OCTET,read-only,,current,,Displays the port number of the switch.
.1.3.6.1.4.1.11863.6.21.1.4.1.1.2,TPLINK-SPANNING-TREE-MIB::tpStpLoopDefendEnable,INTEGER,read-write,,current,disable(0):enable(1),Loop defend is to prevent the loops in the network brought by  recalculating STP because of link failures and network congestions. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.21.1.4.1.1.3,TPLINK-SPANNING-TREE-MIB::tpStpRootBridgeDefendEnable,INTEGER,read-write,,current,disable(0):enable(1),Root defend is to prevent wrong network topology change caused by  the role change of the current legal root bridge. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.21.1.4.1.1.4,TPLINK-SPANNING-TREE-MIB::tpStpTcDefendEnable,INTEGER,read-write,,current,disable(0):enable(1),TC defend is to prevent the decrease of the performance and stability  of the switch brought by continuously removing MAC address entries upon  receiving TC-BPDUs in the STP network.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.21.1.4.1.1.5,TPLINK-SPANNING-TREE-MIB::tpStpBPDUDefendEnable,INTEGER,read-write,,current,disable(0):enable(1),BPDU defend is to prevent BPDUs flood in the STP network. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.21.1.4.1.1.6,TPLINK-SPANNING-TREE-MIB::tpStpBPDUHoldEnable,INTEGER,read-write,,current,disable(0):enable(1),0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.21.1.4.1.1.7,TPLINK-SPANNING-TREE-MIB::tpStpDefendPortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.21.1.4.2,TPLINK-SPANNING-TREE-MIB::tpStpTcDefendConfig,,,,,,
.1.3.6.1.4.1.11863.6.21.1.4.2.1,TPLINK-SPANNING-TREE-MIB::tpStpTcDefendThreshold,INTEGER,read-write,,current,,Enter a number from 1 to 100. It is the maximum number of the  TC-BPDUs received by the switch in a TC Protect Cycle.
.1.3.6.1.4.1.11863.6.21.1.4.2.2,TPLINK-SPANNING-TREE-MIB::tpStpTcDefendTimer,INTEGER,read-write,,current,,Enter a value from 1 to 10 to specify the TC Protect Cycle.
.1.3.6.1.4.1.11863.6.21.2,TPLINK-SPANNING-TREE-MIB::tplinkSpanningTreeNotifications,,,,,,
.1.3.6.1.4.1.11863.6.21.2.1,TPLINK-SPANNING-TREE-MIB::tpMstpTopologyChange,,,,,,The topology of spanning tree has changed.
.1.3.6.1.4.1.11863.6.22,TPLINK-QOS-MIB::tplinkQosMIB,,,,,,Private MIB for system time configuration.
.1.3.6.1.4.1.11863.6.22.1,TPLINK-QOS-MIB::tplinkQosMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.22.1.1,TPLINK-QOS-MIB::tplinkQosBasicConfig,,,,,,
.1.3.6.1.4.1.11863.6.22.1.1.1,TPLINK-QOS-MIB::tpQosBasicConfigTable,,not-accessible,,current,,A list of qos basic config entries. Here you can configure the port priority.
.1.3.6.1.4.1.11863.6.22.1.1.1.1,TPLINK-QOS-MIB::tpQosBasicConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of qos basic config.
.1.3.6.1.4.1.11863.6.22.1.1.1.1.1,TPLINK-QOS-MIB::tpQosBasicConfigPort,OCTET,read-only,,current,,The physical port number of the switch. 
.1.3.6.1.4.1.11863.6.22.1.1.1.1.2,TPLINK-QOS-MIB::tpQosBasicConfigPri,INTEGER,read-write,,current,cos0(0):cos1(1):cos2(2):cos3(3):cos4(4):cos5(5):cos6(6):cos7(7),0. Cos0 1. Cos1 2. Cos2 3. Cos3 4. Cos4 5. Cos5 6. Cos6 7. Cos7 Specify the priority for the port.
.1.3.6.1.4.1.11863.6.22.1.1.1.1.3,TPLINK-QOS-MIB::tpQosBasicConfigLag,OCTET,read-only,,current,,The LAG number which the port belongs to. 
.1.3.6.1.4.1.11863.6.22.1.2,TPLINK-QOS-MIB::tplinkQosScheduler,,,,,,
.1.3.6.1.4.1.11863.6.22.1.2.1,TPLINK-QOS-MIB::tpQosSchedulerConfig,INTEGER,read-write,,current,sp-mode(0):wrr-mode(1):sp-wrr-mode(2):equ-mode(3),Here you can select the schedule mode for the switch.
.1.3.6.1.4.1.11863.6.22.1.2.2,TPLINK-QOS-MIB::tpQosSchedulerWeightTable,,not-accessible,,current,,A table of the information of qos scheduler queue weight.
.1.3.6.1.4.1.11863.6.22.1.2.2.1,TPLINK-QOS-MIB::tpQosSchedulerWeightEntry,,not-accessible,tpQosSchedulerTc,current,,An entry contains of the information of qos scheduler queue weight config.
.1.3.6.1.4.1.11863.6.22.1.2.2.1.1,TPLINK-QOS-MIB::tpQosSchedulerTc,INTEGER,read-only,,current,tc0(0):tc1(1):tc2(2):tc3(3):tc4(4):tc5(5):tc6(6):tc7(7),Indicates the priority level the packets go egress.  The priority levels are labeled as TC.
.1.3.6.1.4.1.11863.6.22.1.2.2.1.2,TPLINK-QOS-MIB::tpQosSchedulerWeight,INTEGER,read-write,,current,,Indecates the egress queue weight value.
.1.3.6.1.4.1.11863.6.22.1.3,TPLINK-QOS-MIB::tplinkQos8021p,,,,,,
.1.3.6.1.4.1.11863.6.22.1.3.2,TPLINK-QOS-MIB::tpQos8021pTable,,not-accessible,,current,,A list of qos 8021p entries. Here you can configure 802.1P Priority.
.1.3.6.1.4.1.11863.6.22.1.3.2.1,TPLINK-QOS-MIB::tpQos8021pEntry,,not-accessible,tpQos8021pPriTag,current,,An entry contains of the information of qos 8021p.
.1.3.6.1.4.1.11863.6.22.1.3.2.1.1,TPLINK-QOS-MIB::tpQos8021pPriTag,INTEGER,read-only,,current,,Indicates the precedence level defined by IEEE802.1P. 
.1.3.6.1.4.1.11863.6.22.1.3.2.1.2,TPLINK-QOS-MIB::tpQos8021pPriLevel,INTEGER,read-write,,current,tc0(0):tc1(1):tc2(2):tc3(3):tc4(4):tc5(5):tc6(6):tc7(7),Indicates the priority level the packets with tag are mapped to.  The priority levels are labeled as TC.
.1.3.6.1.4.1.11863.6.22.1.4,TPLINK-QOS-MIB::tplinkQosDSCP,,,,,,
.1.3.6.1.4.1.11863.6.22.1.4.1,TPLINK-QOS-MIB::tpQosDSCPEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.22.1.4.2,TPLINK-QOS-MIB::tpQosDSCPTable,,not-accessible,,current,,A list of qos DSCP entries. Here you can configure DSCP Priority.
.1.3.6.1.4.1.11863.6.22.1.4.2.1,TPLINK-QOS-MIB::tpQosDSCPEntry,,not-accessible,tpQosDSCPPriTag,current,,An entry contains of the information of qos DSCP.
.1.3.6.1.4.1.11863.6.22.1.4.2.1.1,TPLINK-QOS-MIB::tpQosDSCPPriTag,INTEGER,read-only,,current,,Indicates the priority determined by the DS region of IP datagram.  It ranges from 0 to 63. 
.1.3.6.1.4.1.11863.6.22.1.4.2.1.2,TPLINK-QOS-MIB::tpQosDSCPPriLevel,INTEGER,read-write,,current,cos0(0):cos1(1):cos2(2):cos3(3):cos4(4):cos5(5):cos6(6):cos7(7),Indicates the priority level the packets with tag are mapped to.  The priority levels are labeled as cos0 - cos7.
.1.3.6.1.4.1.11863.6.22.2,TPLINK-QOS-MIB::tplinkQosNotifications,,,,,,
.1.3.6.1.4.1.11863.6.23,TPLINK-BANDWIDTH-MIB::tplinkBandWidthMIB,,,,,,Private MIB for system time configuration.
.1.3.6.1.4.1.11863.6.23.1,TPLINK-BANDWIDTH-MIB::tplinkBandWidthMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.23.1.1,TPLINK-BANDWIDTH-MIB::tpRateLimit,,,,,,
.1.3.6.1.4.1.11863.6.23.1.1.1,TPLINK-BANDWIDTH-MIB::tpRateLimitTable,,not-accessible,,current,,A list of rate limit entries. Here you can configure the traffic rate on each port.
.1.3.6.1.4.1.11863.6.23.1.1.1.1,TPLINK-BANDWIDTH-MIB::tpRateLimitEntry,,not-accessible,ifIndex,current,,An entry contains of the information of rate limit.
.1.3.6.1.4.1.11863.6.23.1.1.1.1.1,TPLINK-BANDWIDTH-MIB::tpRateLimitPort,OCTET,read-only,,current,,The port number of the Switch.
.1.3.6.1.4.1.11863.6.23.1.1.1.1.2,TPLINK-BANDWIDTH-MIB::tpRateLimitIngressRate,INTEGER,read-write,,current,,Set the bandwidth for receiving packets on the port.
.1.3.6.1.4.1.11863.6.23.1.1.1.1.3,TPLINK-BANDWIDTH-MIB::tpRateLimitEgressRate,INTEGER,read-write,,current,,Set the bandwidth for sending packets on the port.
.1.3.6.1.4.1.11863.6.23.1.1.1.1.4,TPLINK-BANDWIDTH-MIB::tpRateLimitPortLag,OCTET,read-only,,current,,The LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.23.1.2,TPLINK-BANDWIDTH-MIB::tpStormControl,,,,,,
.1.3.6.1.4.1.11863.6.23.1.2.1,TPLINK-BANDWIDTH-MIB::tpStormControlEnPPSTable,,not-accessible,,current,,A list of storm control entries. Here you can configure the port PPS mode with PPS enabled or disabled.
.1.3.6.1.4.1.11863.6.23.1.2.1.1,TPLINK-BANDWIDTH-MIB::tpStormControlEnPPSEntry,,not-accessible,ifIndex,current,,An entry contains of the information of storm control PPS mode.
.1.3.6.1.4.1.11863.6.23.1.2.1.1.1,TPLINK-BANDWIDTH-MIB::tpStormControlEnPPSPort,OCTET,read-only,,current,,The port number of the Switch.
.1.3.6.1.4.1.11863.6.23.1.2.1.1.2,TPLINK-BANDWIDTH-MIB::tpStormControlEnablePPS,INTEGER,read-write,,current,disable(0):enable(1),The storm control rate mode configuration: 
.1.3.6.1.4.1.11863.6.23.1.2.1.1.3,TPLINK-BANDWIDTH-MIB::tpStormControlEnPPSPortLag,OCTET,read-only,,current,,The LAG number which the port belongs to. 
.1.3.6.1.4.1.11863.6.23.1.2.2,TPLINK-BANDWIDTH-MIB::tpStormControlModeTable,,not-accessible,,current,,A list of storm control entries. Here you can configure the port storm control mode with kbps, ratio or pps.
.1.3.6.1.4.1.11863.6.23.1.2.2.1,TPLINK-BANDWIDTH-MIB::tpStormControlModeEntry,,not-accessible,ifIndex,current,,An entry contains of the information of storm control rate mode.
.1.3.6.1.4.1.11863.6.23.1.2.2.1.1,TPLINK-BANDWIDTH-MIB::tpStormControlModePort,OCTET,read-only,,current,,The port number of the Switch.
.1.3.6.1.4.1.11863.6.23.1.2.2.1.2,TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRateMode,INTEGER,read-write,,current,kbps(0):ratio(1):pps(2),Broadcast rate mode configuration. 
.1.3.6.1.4.1.11863.6.23.1.2.2.1.3,TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRateMode,INTEGER,read-write,,current,kbps(0):ratio(1):pps(2),Multicast rate mode configuration. 
.1.3.6.1.4.1.11863.6.23.1.2.2.1.4,TPLINK-BANDWIDTH-MIB::tpStormControlULRateMode,INTEGER,read-write,,current,kbps(0):ratio(1):pps(2),UL-Frame rate mode configuration. 
.1.3.6.1.4.1.11863.6.23.1.2.2.1.5,TPLINK-BANDWIDTH-MIB::tpStormControlModePortLag,OCTET,read-only,,current,,The LAG number which the port belongs to. 
.1.3.6.1.4.1.11863.6.23.1.2.3,TPLINK-BANDWIDTH-MIB::tpStormControlTable,,not-accessible,,current,,A list of storm control entries. Here you can configure the bandwidth for forwarding packets.
.1.3.6.1.4.1.11863.6.23.1.2.3.1,TPLINK-BANDWIDTH-MIB::tpStormControlEntry,,not-accessible,ifIndex,current,,An entry contains of the information of storm control.
.1.3.6.1.4.1.11863.6.23.1.2.3.1.1,TPLINK-BANDWIDTH-MIB::tpStormControlPort,OCTET,read-only,,current,,The port number of the Switch.
.1.3.6.1.4.1.11863.6.23.1.2.3.1.2,TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRate,INTEGER,read-write,,current,,Set the bandwidth for receiving broadcast packets on the port.  The packet traffic exceeding the bandwidth will be discarded.  Set it 0 to disable the storm control function for the port.
.1.3.6.1.4.1.11863.6.23.1.2.3.1.3,TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRate,INTEGER,read-write,,current,,Set the bandwidth for receiving multicast packets on the port.  The packet traffic exceeding the bandwidth will be discarded.  Set it 0 to disable the storm control function for the port.
.1.3.6.1.4.1.11863.6.23.1.2.3.1.4,TPLINK-BANDWIDTH-MIB::tpStormControlULRate,INTEGER,read-write,,current,,Set the bandwidth for receiving UL-Frame on the port.  The packet traffic exceeding the bandwidth will be discarded.  Set it 0 to disable the storm control function for the port. 
.1.3.6.1.4.1.11863.6.23.1.2.3.1.5,TPLINK-BANDWIDTH-MIB::tpStormControlPortLag,OCTET,read-only,,current,,The LAG number which the port belongs to. 
.1.3.6.1.4.1.11863.6.23.2,TPLINK-BANDWIDTH-MIB::tplinkBandWidthNotifications,,,,,,
.1.3.6.1.4.1.11863.6.23.2.1,TPLINK-BANDWIDTH-MIB::tpBroadcastRateExceed,,,,,,An broadcastRateExceed notification is sent when the value of broadcast stormControl rate set of port is exceeded.   Note that if you need this notification, the value of broadcast  stormControl rate of port must be set. The transmission of  stormControl notifications are throttled by the agent three sesonds  every time.
.1.3.6.1.4.1.11863.6.23.2.2,TPLINK-BANDWIDTH-MIB::tpMulticastRateExceed,,,,,,An stormControl notification is sent when the value of multicast stormControl rate set of port is exceeded.   Note that if you need this notification, the value of multicast  stormControl rate of port must be set. The transmission of  stormControl notifications are throttled by the agent three sesonds  every time.
.1.3.6.1.4.1.11863.6.23.2.3,TPLINK-BANDWIDTH-MIB::tpIngressRateExceed,,,,,,An ingressRateExceed notification is sent when the value of ingress rate set of port is exceeded.   Note that if you need this notification, the value of ingress  rate of port must be set.The transmission of ingressRateExceed  notifications are throttled by the agent three sesonds every time.
.1.3.6.1.4.1.11863.6.23.2.4,TPLINK-BANDWIDTH-MIB::tpEgressRateExceed,,,,,,An egressRateExceed notification is sent when the value of egress rate set of port is exceeded.   Note that if you need this notification, the value of egress  rate of port must be set.The transmission of egressRateExceed  notifications are throttled by the agent three sesonds every time.
.1.3.6.1.4.1.11863.6.24,TPLINK-SYSLOG-MIB::tplinkSyslogMIB,,,,,,This MIB module contain a collection of managed objects that apply to network devices with Syslog function.
.1.3.6.1.4.1.11863.6.24.1,TPLINK-SYSLOG-MIB::tplinkSyslogMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.24.1.1,TPLINK-SYSLOG-MIB::tpSyslogBuffer,,,,,,
.1.3.6.1.4.1.11863.6.24.1.1.1,TPLINK-SYSLOG-MIB::tpSyslogBufferSeverity,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Select the severity of information to be stored to System Log Buffer.
.1.3.6.1.4.1.11863.6.24.1.1.2,TPLINK-SYSLOG-MIB::tpSyslogBufferState,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable System Log Buffer on the Switch.
.1.3.6.1.4.1.11863.6.24.1.2,TPLINK-SYSLOG-MIB::tpSyslogConsole,,,,,,
.1.3.6.1.4.1.11863.6.24.1.2.1,TPLINK-SYSLOG-MIB::tpSyslogConsoleSeverity,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Select the severity of information to be stored to System Log Console.
.1.3.6.1.4.1.11863.6.24.1.2.2,TPLINK-SYSLOG-MIB::tpSyslogConsoleState,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable System Log Console on the Switch.
.1.3.6.1.4.1.11863.6.24.1.3,TPLINK-SYSLOG-MIB::tpSyslogFlash,,,,,,
.1.3.6.1.4.1.11863.6.24.1.3.1,TPLINK-SYSLOG-MIB::tpSyslogFlashSeverity,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Select the severity of information to be stored to System Log Flash.
.1.3.6.1.4.1.11863.6.24.1.3.2,TPLINK-SYSLOG-MIB::tpSyslogFlashState,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable System Log Flash on the Switch.
.1.3.6.1.4.1.11863.6.24.1.3.3,TPLINK-SYSLOG-MIB::tpSyslogFlashSyncFrequency,INTEGER,read-write,,current,,Specify the frequency of information to be synchronized to System Log Flash.
.1.3.6.1.4.1.11863.6.24.1.4,TPLINK-SYSLOG-MIB::tpSyslogMonitor,,,,,,
.1.3.6.1.4.1.11863.6.24.1.4.1,TPLINK-SYSLOG-MIB::tpSyslogMonitorSeverity,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Select the severity of information to be stored to System Log Monitor.
.1.3.6.1.4.1.11863.6.24.1.4.2,TPLINK-SYSLOG-MIB::tpSyslogMonitorState,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable System Log Monitor on the Switch.
.1.3.6.1.4.1.11863.6.24.1.5,TPLINK-SYSLOG-MIB::tpSyslogHostTable,,not-accessible,,current,,This table contain System Log Host information.
.1.3.6.1.4.1.11863.6.24.1.5.1,TPLINK-SYSLOG-MIB::tpSyslogHostEntry,,not-accessible,tpSyslogHostIndex,current,,Configuration of System Log Host.
.1.3.6.1.4.1.11863.6.24.1.5.1.1,TPLINK-SYSLOG-MIB::tpSyslogHostIndex,INTEGER,read-only,,current,,The index of System Log Host entry ,and is unique.
.1.3.6.1.4.1.11863.6.24.1.5.1.2,TPLINK-SYSLOG-MIB::tpSyslogHostIPAddress,IpAddress,read-write,,current,,Specifies the IP address of the System Log Host.
.1.3.6.1.4.1.11863.6.24.1.5.1.3,TPLINK-SYSLOG-MIB::tpSyslogHostSeverity,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Select the severity of information to be stored to System Log Host.
.1.3.6.1.4.1.11863.6.24.1.5.1.4,TPLINK-SYSLOG-MIB::tpSyslogHostState,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable System Log Host on the Switch.
.1.3.6.1.4.1.11863.6.24.2,TPLINK-SYSLOG-MIB::tplinkSyslogNotifications,,,,,,
.1.3.6.1.4.1.11863.6.25,TPLINK-IGMPSNOOPING-MIB::tplinkIgmpSnoopingMIB,,,,,,Private MIB for igmpSnooping manage.
.1.3.6.1.4.1.11863.6.25.1,TPLINK-IGMPSNOOPING-MIB::tplinkIgmpSnoopingMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.25.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpSnooping,,,,,,
.1.3.6.1.4.1.11863.6.25.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpSnoopingGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.25.1.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpSnoopingEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable IGMP Snooping function globally on the Switch. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.25.1.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpUnknownMulticastPacket,INTEGER,read-write,,current,forward(0):discard(1),Select the operation for the switch to process unknown multicast. 0. forward  1. discard
.1.3.6.1.4.1.11863.6.25.1.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpUnknownReportSuppression,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable IGMP Snooping report suppression function globally on the Switch. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.25.1.1.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpGlobalRouterTime,INTEGER,read-create,,current,,Specify the aging time of the router port. Within this time,  if the switch don't receive IGMP query message from the router port,  it will consider this port is not a router port any more,60-600 second.
.1.3.6.1.4.1.11863.6.25.1.1.1.5,TPLINK-IGMPSNOOPING-MIB::tpIgmpGlobalMemberTime,INTEGER,read-create,,current,,Specify the aging time of the member port. Within this time,  if the switch don't receive IGMP report message from the member port, it will consider this port is not a member port any more,60-600 second.
.1.3.6.1.4.1.11863.6.25.1.1.1.6,TPLINK-IGMPSNOOPING-MIB::tpIgmplastListenerQueryInterval,INTEGER,read-create,,current,,Enter the Last Listener Query interval time. When the multicast group has no more member ports, it will send the Specific Query Message with this interval time to check whether there is another member. The interval is ranging from 1 to 5 seconds.
.1.3.6.1.4.1.11863.6.25.1.1.1.7,TPLINK-IGMPSNOOPING-MIB::tpIgmplastListenerQueryCount,INTEGER,read-create,,current,,Enter the Last Listener Query numbers. When the multicast group has no more member ports, it will send this numbers of Specific Query Message to check whether there is another member. It is ranging from 1 to 5.
.1.3.6.1.4.1.11863.6.25.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.25.1.1.2.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpPortTable,,not-accessible,,current,,IGMP Snooping (Internet Group Management Protocol Snooping)  is a multicast control mechanism running on Layer 2 switch.  It can effectively prevent multicast groups being broadcasted  in the network.
.1.3.6.1.4.1.11863.6.25.1.1.2.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of port configure.
.1.3.6.1.4.1.11863.6.25.1.1.2.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpSnoopingPortEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable IGMP Snooping for the desired port. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.25.1.1.2.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpFastLeavePortEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Fast Leave feature for the desired port.  If Fast Leave is enabled for a port, the Switch will immediately  remove this port from the multicast group upon receiving IGMP  leave messages. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.25.1.1.2.1.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpPortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.25.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpVlanConfig,,,,,,
.1.3.6.1.4.1.11863.6.25.1.1.3.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpVlanTable,,not-accessible,,current,,Multicast groups established by IGMP Snooping are based on VLANs.  You can configure different IGMP parameters for different VLANs.
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpVlanEntry,,not-accessible,tpIgmpVlanId,current,,An entry contains of the information of igmpsnooping.
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpVlanId,INTEGER,read-only,,current,,Enter the VLAN ID to enable IGMP Snooping for the desired VLAN,1-4094.
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpRouterTime,INTEGER,read-create,,current,,Specify the aging time of the router port. Within this time,  if the switch don't receive IGMP query message from the router port,  it will consider this port is not a router port any more,0,60-600 second.
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpMemberTime,INTEGER,read-create,,current,,Specify the aging time of the member port. Within this time,  if the switch don't receive IGMP report message from the member port, it will consider this port is not a member port any more,0,60-600 second.
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpRouterPort,OCTET,read-create,,current,,Config the static router ports which are mainly used in the network with  stable topology.
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1.5,TPLINK-IGMPSNOOPING-MIB::tpIgmpForbiddenRouterPort,OCTET,read-create,,current,,Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports.
.1.3.6.1.4.1.11863.6.25.1.1.3.1.1.6,TPLINK-IGMPSNOOPING-MIB::tpIgmpVlanStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.25.1.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpMultiVlanConfig,,,,,,
.1.3.6.1.4.1.11863.6.25.1.1.4.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpMultiVlanId,INTEGER,read-write,,current,,Enter the VLAN ID of the multicast VLAN,2-4094.If enter 0, multicast VLAN is disabled.
.1.3.6.1.4.1.11863.6.25.1.1.4.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpMultitRouterTime,INTEGER,read-write,,current,,Specify the aging time of the router port. Within this time,  if the switch don't receive IGMP query message from the router port, it will consider this port is not a router port any more,0,60-600 second.
.1.3.6.1.4.1.11863.6.25.1.1.4.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpMultiMemberTime,INTEGER,read-write,,current,,Specify the aging time of the member port. Within this time,  if the switch don't receive IGMP report message from the member port,  it will consider this port is not a member port any more,0,60-600 second.
.1.3.6.1.4.1.11863.6.25.1.1.4.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpMultiRouterPort,OCTET,read-write,,current,,Config the static router ports which are mainly used in the network with  stable topology.
.1.3.6.1.4.1.11863.6.25.1.1.4.5,TPLINK-IGMPSNOOPING-MIB::tpIgmpMultiForbiddenRouterPort,OCTET,read-write,,current,,Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports.
.1.3.6.1.4.1.11863.6.25.1.1.4.6,TPLINK-IGMPSNOOPING-MIB::tpIgmpMultiReplaceSrcIp,IpAddress,read-create,,current,,config the source ip which will replace the source ip of IGMP report in  multicast vlan.
.1.3.6.1.4.1.11863.6.25.1.1.5,TPLINK-IGMPSNOOPING-MIB::tpIgmpQuerierConfig,,,,,,
.1.3.6.1.4.1.11863.6.25.1.1.5.1,TPLINK-IGMPSNOOPING-MIB::igmpQuerierTable,,not-accessible,,current,,IGMP Snooping Querier is based on VLAN. You can configure  different IGMP Snooping Querier parameters for different VLANs.
.1.3.6.1.4.1.11863.6.25.1.1.5.1.1,TPLINK-IGMPSNOOPING-MIB::igmpQuerierEntry,,not-accessible,igmpQuerierVlanId,current,,An entry contains of the information of IGMP Snooping Querier.
.1.3.6.1.4.1.11863.6.25.1.1.5.1.1.1,TPLINK-IGMPSNOOPING-MIB::igmpQuerierVlanId,INTEGER,read-only,,current,,Enter the VLAN ID to enable IGMP Snooping Querier for the desired VLAN, ranging from 1 to 4094.
.1.3.6.1.4.1.11863.6.25.1.1.5.1.1.2,TPLINK-IGMPSNOOPING-MIB::queryInterval,INTEGER,read-create,,current,,Enter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds.
.1.3.6.1.4.1.11863.6.25.1.1.5.1.1.3,TPLINK-IGMPSNOOPING-MIB::maxResponseTime,INTEGER,read-create,,current,,Enter the value of Maximum Response Time field of the Query message. The host is expected to response to an IGMP general query within this time. The time is ranging from 1 to 25 seconds.
.1.3.6.1.4.1.11863.6.25.1.1.5.1.1.4,TPLINK-IGMPSNOOPING-MIB::generalQuerySrcIp,IpAddress,read-create,,current,,Enter the General Query Message source IP address.
.1.3.6.1.4.1.11863.6.25.1.1.5.1.1.5,TPLINK-IGMPSNOOPING-MIB::igmpQuerierStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.25.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpFilter,,,,,,
.1.3.6.1.4.1.11863.6.25.1.2.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpPortFilterConfig,,,,,,
.1.3.6.1.4.1.11863.6.25.1.2.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpFilterPortTable,,not-accessible,,current,,When the switch receives IGMP report message, it examines  the multicast filtering IP ID configured on the access port  to determine if the port can join the multicast group.  If the multicast IP is not filtered, the switch will add  the port to the forward port list of the multicast group.  Otherwise, the switch will drop the IGMP report message.  In that way, you can control the multicast groups that users  can access.
.1.3.6.1.4.1.11863.6.25.1.2.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpFilterPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of a port param.
.1.3.6.1.4.1.11863.6.25.1.2.1.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpFilterMaxGroup,INTEGER,read-write,,current,,Specify the maximum number of multicast groups to prevent some  ports taking up too much bandwidth.
.1.3.6.1.4.1.11863.6.25.1.2.1.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpFilterMaxGroupAction,INTEGER,read-write,,current,drop(0):replace(1),The policy should be taken when the number of multicast group  0.Drop: drop the successive report packet, and this port can  1.Replace: when the port joins another new multicast group,it 
.1.3.6.1.4.1.11863.6.25.1.2.1.1.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpFilterBindAddrId,OCTET,read-write,,current,,Enter the profile ID the port will be bound to. Only one profile
.1.3.6.1.4.1.11863.6.25.1.2.1.1.1.5,TPLINK-IGMPSNOOPING-MIB::tpIgmpFilterPortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.25.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpAuth,,,,,,
.1.3.6.1.4.1.11863.6.25.1.3.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpPortAuthConfig,,,,,,
.1.3.6.1.4.1.11863.6.25.1.3.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpAuthPortTable,,not-accessible,,current,,IGMP Authentication can control the access of multicast packets.
.1.3.6.1.4.1.11863.6.25.1.3.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpAuthPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of port authentication configure.
.1.3.6.1.4.1.11863.6.25.1.3.1.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpAuthEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable IGMP Authentication for the desired port. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.25.1.3.1.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpAuthPortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.25.1.3.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpGlobalAuthAccountConfig,,,,,,
.1.3.6.1.4.1.11863.6.25.1.3.2.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpGlobalAuthAccountConfigEable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.25.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpPacketStatistic,,,,,,
.1.3.6.1.4.1.11863.6.25.1.4.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpPktStat,,,,,,
.1.3.6.1.4.1.11863.6.25.1.4.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpPktStatTable,,not-accessible,,current,,A list of multicast statistic Table.
.1.3.6.1.4.1.11863.6.25.1.4.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpPktStatEntry,,not-accessible,ifIndex,current,,An entry contains of multicast packet statistics over each port.
.1.3.6.1.4.1.11863.6.25.1.4.1.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpQueryPktStat,INTEGER,read-only,,current,,Displays the number of query packets the port received.
.1.3.6.1.4.1.11863.6.25.1.4.1.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpReportV1PktStat,INTEGER,read-only,,current,,Displays the number of IGMPv1 report packets the port received.
.1.3.6.1.4.1.11863.6.25.1.4.1.1.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpReportV2PktStat,INTEGER,read-only,,current,,Displays the number of IGMPv2 report packets the port received.
.1.3.6.1.4.1.11863.6.25.1.4.1.1.1.5,TPLINK-IGMPSNOOPING-MIB::tpIgmpReportV3PktStat,INTEGER,read-only,,current,,Displays the number of IGMPv3 report packets the port received.
.1.3.6.1.4.1.11863.6.25.1.4.1.1.1.6,TPLINK-IGMPSNOOPING-MIB::tpIgmpLeavePktStat,INTEGER,read-only,,current,,Displays the number of leave packets the port received.
.1.3.6.1.4.1.11863.6.25.1.4.1.1.1.7,TPLINK-IGMPSNOOPING-MIB::tpIgmpErrorPktStat,INTEGER,read-only,,current,,Displays the number of error packets the port received.
.1.3.6.1.4.1.11863.6.25.1.4.1.2,TPLINK-IGMPSNOOPING-MIB::tpIpIgmpPktStatClear,INTEGER,read-write,,current,commit(1),igmp packet statistic clear.
.1.3.6.1.4.1.11863.6.25.1.5,TPLINK-IGMPSNOOPING-MIB::tpIgmpMultigroup,,,,,,
.1.3.6.1.4.1.11863.6.25.1.5.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpMulticastGroups,,,,,,
.1.3.6.1.4.1.11863.6.25.1.5.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpMulticastGroupTable,,not-accessible,,current,,A list of multicast groups Table.
.1.3.6.1.4.1.11863.6.25.1.5.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpMulticastGroupEntry,,not-accessible,tpIgmpMulticastIP:tpIgmpVlanID,current,,An entry contains of multicast packet statistics over each port.
.1.3.6.1.4.1.11863.6.25.1.5.1.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpMulticastIP,IpAddress,read-only,,current,,Displays the multicast IP address.
.1.3.6.1.4.1.11863.6.25.1.5.1.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpVlanID,INTEGER,read-only,,current,,Displays the VLAN ID.
.1.3.6.1.4.1.11863.6.25.1.5.1.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpForwardPorts,OCTET,read-only,,current,,Displays the forward ports of multicast group.
.1.3.6.1.4.1.11863.6.25.1.5.1.1.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpGrouptype,INTEGER,read-only,,current,static(0):dynamic(1),Displays the type of multicast group.
.1.3.6.1.4.1.11863.6.25.1.6,TPLINK-IGMPSNOOPING-MIB::tpIgmpStaticMultigroup,,,,,,
.1.3.6.1.4.1.11863.6.25.1.6.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpMulticastStaticGroups,,,,,,
.1.3.6.1.4.1.11863.6.25.1.6.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpMulticastStaticGroupTable,,not-accessible,,current,,A list of multicast groups Table.
.1.3.6.1.4.1.11863.6.25.1.6.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpMulticastStaticGroupEntry,,not-accessible,tpIgmpStaticMulticastIP:tpIgmpStaticVlanID,current,,An entry contains of multicast packet statistics over each port.
.1.3.6.1.4.1.11863.6.25.1.6.1.1.1.1,TPLINK-IGMPSNOOPING-MIB::tpIgmpStaticMulticastIP,IpAddress,read-only,,current,,The multicast IP address.
.1.3.6.1.4.1.11863.6.25.1.6.1.1.1.2,TPLINK-IGMPSNOOPING-MIB::tpIgmpStaticVlanID,INTEGER,read-only,,current,,The VLAN ID.
.1.3.6.1.4.1.11863.6.25.1.6.1.1.1.3,TPLINK-IGMPSNOOPING-MIB::tpIgmpStaticForwardPorts,OCTET,read-create,,current,,The forward ports of multicast group.
.1.3.6.1.4.1.11863.6.25.1.6.1.1.1.4,TPLINK-IGMPSNOOPING-MIB::tpIgmpStaticGroupStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow:  active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.25.2,TPLINK-IGMPSNOOPING-MIB::tplinkIgmpSnoopingNotifications,,,,,,
.1.3.6.1.4.1.11863.6.26,TPLINK-ACL-MIB::tplinkAclMIB,,,,,,Private MIB for acl.
.1.3.6.1.4.1.11863.6.26.1,TPLINK-ACL-MIB::tplinkAclMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.26.1.1,TPLINK-ACL-RULE-MIB::tpAclRuleConfigure,,,,,,
.1.3.6.1.4.1.11863.6.26.1.1.1,TPLINK-ACL-RULE-MIB::tpMacRuleTable,,not-accessible,,current,,A list of L2 MAC ACL rule entries.
.1.3.6.1.4.1.11863.6.26.1.1.1.1,TPLINK-ACL-RULE-MIB::tpMacRuleEntry,,not-accessible,tpMacAclId:tpMacRuleId,current,,An entry contains of the information of MAC ACL.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.1,TPLINK-ACL-RULE-MIB::tpMacAclId,INTEGER,read-only,,current,,MAC ACL ID.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.2,TPLINK-ACL-RULE-MIB::tpMacRuleId,INTEGER,read-only,,current,,MAC ACL rule ID.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.3,TPLINK-ACL-RULE-MIB::tpMacSecOperation,INTEGER,read-create,,current,permit(0):deny(1),MAC ACL Security Operation.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.4,TPLINK-ACL-RULE-MIB::tpMacSmacAddress,OCTET,read-create,,current,,Source MAC address, string length setting to zero means that the source MAC address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.5,TPLINK-ACL-RULE-MIB::tpMacSmacMask,OCTET,read-create,,current,,Source Mac Mask, string length setting to zero means that every bit of the mask is 1.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.6,TPLINK-ACL-RULE-MIB::tpMacDmacAddress,OCTET,read-create,,current,,Destination MAC address, string length setting to zero means that the destination MAC address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.7,TPLINK-ACL-RULE-MIB::tpMacDmacMask,OCTET,read-create,,current,,Destination Mac Mask, string length setting to zero means that every bit of the mask is 1.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.8,TPLINK-ACL-RULE-MIB::tpMacVlanId,INTEGER,read-create,,current,,VLAN ID, 0-4094, value '0' means that the vid field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.9,TPLINK-ACL-RULE-MIB::tpMacEtherType,INTEGER,read-create,,current,,Ethernet protocol type, 0x0-0x10000.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.10,TPLINK-ACL-RULE-MIB::tpMacPri,INTEGER,read-create,,current,,802.1P priority, 0-8, value '8' means that the priority field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.11,TPLINK-ACL-RULE-MIB::tpMacTimeSegment,OCTET,read-create,,current,,MAC ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.1.1.12,TPLINK-ACL-RULE-MIB::tpMacRuleStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.26.1.1.2,TPLINK-ACL-RULE-MIB::tpStdipRuleTable,,not-accessible,,current,,A list of standard IP rule entries.
.1.3.6.1.4.1.11863.6.26.1.1.2.1,TPLINK-ACL-RULE-MIB::tpStdipRuleEntry,,not-accessible,tpStdipAclId:tpStdipRuleId,current,,An entry contains of the information of STDIP ACL.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.1,TPLINK-ACL-RULE-MIB::tpStdipAclId,INTEGER,read-only,,current,,Standard IP ACL ID.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.2,TPLINK-ACL-RULE-MIB::tpStdipRuleId,INTEGER,read-only,,current,,Standard IP ACL rule ID.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.3,TPLINK-ACL-RULE-MIB::tpStdipSecOperation,INTEGER,read-create,,current,permit(0):deny(1),Standard IP ACL Security Operation.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.4,TPLINK-ACL-RULE-MIB::tpStdipSipAddress,IpAddress,read-create,,current,,Source IP address, value '0.0.0.0' means that the source IP address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.5,TPLINK-ACL-RULE-MIB::tpStdipSipMask,IpAddress,read-create,,current,,Source IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.6,TPLINK-ACL-RULE-MIB::tpStdipDipAddress,IpAddress,read-create,,current,,Destination IP address, value '0.0.0.0' means that the destination IP address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.7,TPLINK-ACL-RULE-MIB::tpStdipDipMask,IpAddress,read-create,,current,,Destination IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.8,TPLINK-ACL-RULE-MIB::tpStdipTimeSegment,OCTET,read-create,,current,,STDIP ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.2.1.9,TPLINK-ACL-RULE-MIB::tpStdipRuleStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.26.1.1.3,TPLINK-ACL-RULE-MIB::tpExtipRuleTable,,not-accessible,,current,,A list of extended IP rule entries.
.1.3.6.1.4.1.11863.6.26.1.1.3.1,TPLINK-ACL-RULE-MIB::tpExtipRuleEntry,,not-accessible,tpExtipAclId:tpExtipRuleId,current,,An entry contains of the information of EXTIP ACL.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.1,TPLINK-ACL-RULE-MIB::tpExtipAclId,INTEGER,read-only,,current,,Extended IP ACL ID.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.2,TPLINK-ACL-RULE-MIB::tpExtipRuleId,INTEGER,read-only,,current,,Extended IP ACL rule ID.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.3,TPLINK-ACL-RULE-MIB::tpExtipSecOperation,INTEGER,read-create,,current,permit(0):deny(1),Extended IP ACL Security Operation.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.4,TPLINK-ACL-RULE-MIB::tpExtipFragment,INTEGER,read-create,,current,disable(0):enable(1),Extended IP fragment, conflicts with all the L4 feature.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.5,TPLINK-ACL-RULE-MIB::tpExtipSipAddress,IpAddress,read-create,,current,,Source IP address, value '0.0.0.0' means that the source IP address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.6,TPLINK-ACL-RULE-MIB::tpExtipSipMask,IpAddress,read-create,,current,,Source IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.7,TPLINK-ACL-RULE-MIB::tpExtipDipAddress,IpAddress,read-create,,current,,Destination IP address, value '0.0.0.0' means that the Destination IP address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.8,TPLINK-ACL-RULE-MIB::tpExtipDipMask,IpAddress,read-create,,current,,Destination IP Mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.9,TPLINK-ACL-RULE-MIB::tpExtipProtocol,INTEGER,read-create,,current,,L4 protocol type, 0-255, value '0' means this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.10,TPLINK-ACL-RULE-MIB::tpExtipTcpFlag,INTEGER,read-create,,current,,Extended IP TCP flag, this field is described as a bit-map structure:
.1.3.6.1.4.1.11863.6.26.1.1.3.1.11,TPLINK-ACL-RULE-MIB::tpExtipSourcePort,INTEGER,read-create,,current,,Extended IP TCP/UDP source port, 0-65536, value '65536' means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.12,TPLINK-ACL-RULE-MIB::tpExtipDestPort,INTEGER,read-create,,current,,Extended IP TCP/UDP destination port, 0-65536, value '65536' means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.13,TPLINK-ACL-RULE-MIB::tpExtipDscp,INTEGER,read-create,,current,,Extended IP DSCP, 0-64, value '64' means this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.14,TPLINK-ACL-RULE-MIB::tpExtipTos,INTEGER,read-create,,current,,Extended IP type of service(ToS), 0-16, value '16' means this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.15,TPLINK-ACL-RULE-MIB::tpExtipPre,INTEGER,read-create,,current,,Extended IP pre, 0-8, value '8' means this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.16,TPLINK-ACL-RULE-MIB::tpExtipTimeSegment,OCTET,read-create,,current,,EXTIP ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.3.1.17,TPLINK-ACL-RULE-MIB::tpExtipRuleStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.26.1.1.4,TPLINK-ACL-RULE-MIB::tpCombRuleTable,,not-accessible,,current,,A list of combined MAC+IP rule entries.
.1.3.6.1.4.1.11863.6.26.1.1.4.1,TPLINK-ACL-RULE-MIB::tpCombRuleEntry,,not-accessible,tpCombAclId:tpCombRuleId,current,,An entry contains of the information of Combined ACL.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.1,TPLINK-ACL-RULE-MIB::tpCombAclId,INTEGER,read-only,,current,,Combined MAC+IP ACL ID.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.2,TPLINK-ACL-RULE-MIB::tpCombRuleId,INTEGER,read-only,,current,,Combined ACL rule ID.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.3,TPLINK-ACL-RULE-MIB::tpCombSecOperation,INTEGER,read-create,,current,permit(0):deny(1),Combined ACL Security Operation.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.4,TPLINK-ACL-RULE-MIB::tpCombSmacAddress,OCTET,read-create,,current,,Source MAC address, string length setting to zero means that the source MAC address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.5,TPLINK-ACL-RULE-MIB::tpCombSmacMask,OCTET,read-create,,current,,Source MAC Mask, string length setting to zero means that every bit of the mask is 1.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.6,TPLINK-ACL-RULE-MIB::tpCombDmacAddress,OCTET,read-create,,current,,Destination MAC address, string length setting to zero means that the destination MAC address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.7,TPLINK-ACL-RULE-MIB::tpCombDmacMask,OCTET,read-create,,current,,Destination MAC Mask, string length setting to zero means that every bit of the mask is 1.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.8,TPLINK-ACL-RULE-MIB::tpCombVlanId,INTEGER,read-create,,current,,VLAN ID, 0-4094, value '0' means that the vid field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.9,TPLINK-ACL-RULE-MIB::tpCombEtherType,INTEGER,read-create,,current,,Ethernet protocol type, 0x0-0x10000.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.10,TPLINK-ACL-RULE-MIB::tpCombPri,INTEGER,read-create,,current,,802.1P priority, 0-8, value '8' means that the priority field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.11,TPLINK-ACL-RULE-MIB::tpCombSipAddress,IpAddress,read-create,,current,,Source IP address, value '0.0.0.0' means that the source IP address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.12,TPLINK-ACL-RULE-MIB::tpCombSipMask,IpAddress,read-create,,current,,Source IP mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.13,TPLINK-ACL-RULE-MIB::tpCombDipAddress,IpAddress,read-create,,current,,Destination IP address, value '0.0.0.0' means that the destination IP address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.14,TPLINK-ACL-RULE-MIB::tpCombDipMask,IpAddress,read-create,,current,,Destination IP mask, value '0.0.0.0' or zero length means that the mask is 255.255.255.255.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.15,TPLINK-ACL-RULE-MIB::tpCombTimeSegment,OCTET,read-create,,current,,Combined ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.4.1.16,TPLINK-ACL-RULE-MIB::tpCombRuleStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.26.1.1.5,TPLINK-ACL-RULE-MIB::tpIPv6RuleTable,,not-accessible,,current,,A list of IPv6 rule entries.
.1.3.6.1.4.1.11863.6.26.1.1.5.1,TPLINK-ACL-RULE-MIB::tpIPv6RuleEntry,,not-accessible,tpIPv6AclId:tpIPv6RuleId,current,,An entry contains of the information of IPv6 ACL.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.1,TPLINK-ACL-RULE-MIB::tpIPv6AclId,INTEGER,read-only,,current,,IPv6 ACL ID.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.2,TPLINK-ACL-RULE-MIB::tpIPv6RuleId,INTEGER,read-only,,current,,IPv6 ACL rule ID.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.3,TPLINK-ACL-RULE-MIB::tpIPv6SecOperation,INTEGER,read-create,,current,permit(0):deny(1),IPv6 ACL Security Operation.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.4,TPLINK-ACL-RULE-MIB::tpIPv6TrafficClass,INTEGER,read-create,,current,,Traffic Class DSCP, 0-64, value '64' means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.5,TPLINK-ACL-RULE-MIB::tpIPv6FlowLabel,INTEGER,read-create,,current,,IPv6 Flow Label, 0x0-0x100000, value '0x100000' or '1048576' means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.6,TPLINK-ACL-RULE-MIB::tpIPv6SipAddress,OCTET,read-create,,current,,IPv6 source IP address, only upper 64 bits supported; the all-zero address means that the source IPv6 address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.7,TPLINK-ACL-RULE-MIB::tpIPv6SipMask,OCTET,read-create,,current,,IPv6 source IP mask, 64 bits, format: ffff:ffff:ffff:ffff; zero length means that every bit of the mask is 1.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.8,TPLINK-ACL-RULE-MIB::tpIPv6DipAddress,OCTET,read-create,,current,,IPv6 destination IP address, only upper 64 bits supported; the all-zero address means that the destination IPv6 address is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.9,TPLINK-ACL-RULE-MIB::tpIPv6DipMask,OCTET,read-create,,current,,IPv6 destination IP mask, 64 bits, format: ffff:ffff:ffff:ffff; zero length means that every bit of the mask is 1.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.10,TPLINK-ACL-RULE-MIB::tpIPv6SourcePort,INTEGER,read-create,,current,,IPv6 L4 source port, 0-65536, value '65536' means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.11,TPLINK-ACL-RULE-MIB::tpIPv6DestPort,INTEGER,read-create,,current,,IPv6 L4 destination port, 0-65536, value '65536' means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.12,TPLINK-ACL-RULE-MIB::tpIPv6TimeSegment,OCTET,read-create,,current,,IPv6 ACL time segment name(max length: 16), the time segment name must be configured previously and string length setting to zero means that this field is disabled.
.1.3.6.1.4.1.11863.6.26.1.1.5.1.13,TPLINK-ACL-RULE-MIB::tpIPv6RuleStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.26.1.2,TPLINK-ACL-MIB::tpPolicyConfigure,,,,,,
.1.3.6.1.4.1.11863.6.26.1.2.1,TPLINK-ACL-MIB::tpPolicyTable,,not-accessible,,current,,A list of policy entries. Here you can add ACLs and create corresponding actions for the policy.
.1.3.6.1.4.1.11863.6.26.1.2.1.1,TPLINK-ACL-MIB::tpPolicyEntry,,not-accessible,tpPolicyName:tpAclId,current,,An entry contains of the information of policy.
.1.3.6.1.4.1.11863.6.26.1.2.1.1.1,TPLINK-ACL-MIB::tpPolicyName,OCTET,read-only,,current,,policy name
.1.3.6.1.4.1.11863.6.26.1.2.1.1.2,TPLINK-ACL-MIB::tpAclId,INTEGER,read-only,,current,,the aclId must be existent
.1.3.6.1.4.1.11863.6.26.1.2.1.1.3,TPLINK-ACL-MIB::tpMirrorPort,INTEGER,read-create,,current,,mirror the data packets in the policy to the specific port. if traffic mirror doesnt work, please set it to 0
.1.3.6.1.4.1.11863.6.26.1.2.1.1.4,TPLINK-ACL-MIB::tpConditionRate,INTEGER,read-create,,current,,limit the transmission rate of the data packets in the policy.(1-1000000Kbps),  if traffic condition doesnt work, please set it to 0
.1.3.6.1.4.1.11863.6.26.1.2.1.1.5,TPLINK-ACL-MIB::tpIfExceedOperation,INTEGER,read-create,,current,none(0):drop(1),Specify the disposal way of the data packets those are transmitted beyond the rate. (you must set the conditionRate firstly)
.1.3.6.1.4.1.11863.6.26.1.2.1.1.6,TPLINK-ACL-MIB::tpRedirectPort,INTEGER,read-create,,current,,Forward the data packets those match the corresponding ACL to the specific port,  if you want redirect to vlan, please set it to 0
.1.3.6.1.4.1.11863.6.26.1.2.1.1.7,TPLINK-ACL-MIB::tpQosRemarkDSCP,INTEGER,read-create,,current,dscp64-noLimit(64):dscp0-be-000000(0):dscp1(1):dscp2(2):dscp3(3):dscp4(4):dscp5(5):dscp6(6):dscp7(7):dscp8-cs1-001000(8):dscp9(9):dscp10-af11-001010(10):dscp11(11):dscp12-af12-001100(12):dscp13(13):dscp14-af13-001110(14):dscp15(15):dscp16-cs2-010000(16):dscp17(17):dscp18-af21-010010(18):dscp19(19):dscp20-af22-010100(20):dscp21(21):dscp22-af23-010110(22):dscp23(23):dscp24-cs3-011000(24):dscp25(25):dscp26-af31-011010(26):dscp27(27):dscp28-af32-011100(28):dscp29(29):dscp30-af33-011110(30):dscp31(31):dscp32-cs4-100000(32):dscp33(33):dscp34-af41-100010(34):dscp35(35):dscp36-af42-100100(36):dscp37(37):dscp38-af43-100110(38):dscp39(39):dscp40-cs5-101000(40):dscp41(41):dscp42(42):dscp43(43):dscp44(44):dscp45(45):dscp46-ef-101110(46):dscp47(47):dscp48-cs6-110000(48):dscp49(49):dscp50(50):dscp51(51):dscp52(52):dscp53(53):dscp54(54):dscp55(55):dscp56-cs7-111000(56):dscp57(57):dscp58(58):dscp59(59):dscp60(60):dscp61(61):dscp62(62):dscp63(63),Specify the DSCP region for the data packets those match the corresponding ACL.
.1.3.6.1.4.1.11863.6.26.1.2.1.1.8,TPLINK-ACL-MIB::tpQosRemarkLocalPri,INTEGER,read-create,,current,default(0):tc0(1):tc1(2):tc2(3):tc3(4):tc4(5):tc5(6):tc6(7):tc7(8),Specify the local priority for the data packets those match the corresponding ACL.
.1.3.6.1.4.1.11863.6.26.1.2.1.1.9,TPLINK-ACL-MIB::tpPolicyStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.26.1.3,TPLINK-ACL-MIB::tpPolicyBindConfigure,,,,,,
.1.3.6.1.4.1.11863.6.26.1.3.1,TPLINK-ACL-MIB::tpPolicyBindPortTable,,not-accessible,,current,,A list of policy port binding entries. Here you can bind a policy to a port. 
.1.3.6.1.4.1.11863.6.26.1.3.1.1,TPLINK-ACL-MIB::tpPolicyBindPortEntry,,not-accessible,tpBindPortPolicyName:tpPolicyPort,current,,An entry contains of the information of policy port binding.
.1.3.6.1.4.1.11863.6.26.1.3.1.1.1,TPLINK-ACL-MIB::tpBindPortPolicyName,OCTET,read-only,,current,,The name of the policy you want to bind.(the policy name must be existent)
.1.3.6.1.4.1.11863.6.26.1.3.1.1.2,TPLINK-ACL-MIB::tpPolicyPort,INTEGER,read-only,,current,,The port that the policy bind to
.1.3.6.1.4.1.11863.6.26.1.3.1.1.3,TPLINK-ACL-MIB::tpPolicyBindPortStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.26.1.3.2,TPLINK-ACL-MIB::tpPolicyBindVlanTable,,not-accessible,,current,,A list of policy vlan binding entries. Here you can bind a policy to a VLAN.
.1.3.6.1.4.1.11863.6.26.1.3.2.1,TPLINK-ACL-MIB::tpPolicyBindVlanEntry,,not-accessible,tpBindVlanPolicyName:tpPolicyVlan,current,,An entry contains of the information of policy vlan binding.
.1.3.6.1.4.1.11863.6.26.1.3.2.1.1,TPLINK-ACL-MIB::tpBindVlanPolicyName,OCTET,read-only,,current,,The name of the policy you want to bind.(the policy name must be existent)
.1.3.6.1.4.1.11863.6.26.1.3.2.1.2,TPLINK-ACL-MIB::tpPolicyVlan,INTEGER,read-only,,current,,the vlan that the policy bind to, the vlan must be existent
.1.3.6.1.4.1.11863.6.26.1.3.2.1.3,TPLINK-ACL-MIB::tpPolicyBindVlanStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.26.1.4,TPLINK-ACL-MIB::tpAclBindConfigure,,,,,,
.1.3.6.1.4.1.11863.6.26.1.4.1,TPLINK-ACL-MIB::tpAclBindPortTable,,not-accessible,,current,,A list of ACL port binding entries. Here you can bind a ACL to a port. 
.1.3.6.1.4.1.11863.6.26.1.4.1.1,TPLINK-ACL-MIB::tpAclBindPortEntry,,not-accessible,tpBindPortAclId:tpAclPort,current,,An entry contains of the information of ACL port binding.
.1.3.6.1.4.1.11863.6.26.1.4.1.1.1,TPLINK-ACL-MIB::tpBindPortAclId,OCTET,read-only,,current,,The Id of the ACL you want to bind.(the ACL Id must be existent)
.1.3.6.1.4.1.11863.6.26.1.4.1.1.2,TPLINK-ACL-MIB::tpAclPort,INTEGER,read-only,,current,,The port that the ACL bind to
.1.3.6.1.4.1.11863.6.26.1.4.1.1.3,TPLINK-ACL-MIB::tpAclBindPortStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.26.1.4.2,TPLINK-ACL-MIB::tpAclBindVlanTable,,not-accessible,,current,,A list of ACL vlan binding entries. Here you can bind a ACL to a VLAN.
.1.3.6.1.4.1.11863.6.26.1.4.2.1,TPLINK-ACL-MIB::tpAclBindVlanEntry,,not-accessible,tpBindVlanAclId:tpAclVlan,current,,An entry contains of the information of ACL vlan binding.
.1.3.6.1.4.1.11863.6.26.1.4.2.1.1,TPLINK-ACL-MIB::tpBindVlanAclId,OCTET,read-only,,current,,The Id of the ACL you want to bind.(the ACL Id must be existent)
.1.3.6.1.4.1.11863.6.26.1.4.2.1.2,TPLINK-ACL-MIB::tpAclVlan,INTEGER,read-only,,current,,the vlan that the ACL bind to, the vlan must be existent
.1.3.6.1.4.1.11863.6.26.1.4.2.1.3,TPLINK-ACL-MIB::tpAclBindVlanStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.26.2,TPLINK-ACL-MIB::tplinkAclNotifications,,,,,,
.1.3.6.1.4.1.11863.6.27,TPLINK-DHCPSNOOPING-MIB::tplinkDhcpSnoopingMIB,,,,,,Private MIB for DHCP Snooping configuration.
.1.3.6.1.4.1.11863.6.27.1,TPLINK-DHCPSNOOPING-MIB::tplinkDhcpSnoopingMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.27.1.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.27.1.1.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.27.1.1.2,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingVlanConfigTable,,not-accessible,,current,,Here you can view and modify the DHCP Snooping VLAN config table.
.1.3.6.1.4.1.11863.6.27.1.1.2.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingVlanConfigEntry,,not-accessible,dhcpSnoopingVlanId,current,,An entry contains of the DHCP Snooping function enable status information of a VLAN.
.1.3.6.1.4.1.11863.6.27.1.1.2.1.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingVlanId,INTEGER,read-create,,current,,Enter the ID number of VLAN,1-4094.
.1.3.6.1.4.1.11863.6.27.1.1.2.1.2,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingVlanStatus,INTEGER,read-create,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.27.1.2,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82Config,,,,,,
.1.3.6.1.4.1.11863.6.27.1.2.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigTable,,not-accessible,,current,,A list of DHCP Snooping option 82 config entries.
.1.3.6.1.4.1.11863.6.27.1.2.1.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of dhcp snooping option 82 config.
.1.3.6.1.4.1.11863.6.27.1.2.1.1.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigPort,OCTET,read-only,,current,,Port number
.1.3.6.1.4.1.11863.6.27.1.2.1.1.2,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigSupportStatus,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.27.1.2.1.1.3,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigOperationStrategy,INTEGER,read-write,,current,keep(0):replace(1):drop(2),Select the operation for the Option 82 filed of the DHCP request packets from the Host.
.1.3.6.1.4.1.11863.6.27.1.2.1.1.4,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigCircuitCustomization,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.27.1.2.1.1.5,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigCircuitID,OCTET,read-write,,current,,The sub-option Circuit ID for the customized Option 82.(1-64 characters)
.1.3.6.1.4.1.11863.6.27.1.2.1.1.6,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigRemoteCustomization,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.27.1.2.1.1.7,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigRemoteID,OCTET,read-write,,current,,The sub-option Remote ID for the customized Option 82.(1-64 characters)
.1.3.6.1.4.1.11863.6.27.1.2.1.1.8,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingOption82ConfigLag,OCTET,read-only,,current,,The LAG to which the port belongs to.
.1.3.6.1.4.1.11863.6.27.1.3,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.27.1.3.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPortConfigTable,,not-accessible,,current,,A list of DHCP Snooping port config entries. Here you can configure the port parameters for the DHCP Snooping.
.1.3.6.1.4.1.11863.6.27.1.3.1.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPortConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of DHCP Snooping port config.
.1.3.6.1.4.1.11863.6.27.1.3.1.1.1,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPort,OCTET,read-only,,current,,Display port number
.1.3.6.1.4.1.11863.6.27.1.3.1.1.2,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPortConfigTrustedPort,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1. enable Select Enable/Disable the port to be a Trusted Port.  Only the Trusted Port can receive the DHCP packets from DHCP servers.
.1.3.6.1.4.1.11863.6.27.1.3.1.1.3,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPortConfigMacVerify,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1. enable Select Enable/Disable the MAC Verify feature.  There are two fields of the DHCP packet containing the MAC address of the Host.  The MAC Verify feature is to compare the two fields and discard the packet  if the two fields are different. 
.1.3.6.1.4.1.11863.6.27.1.3.1.1.4,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPortConfigRateLimit,INTEGER,read-write,,current,disable(0):value5pps(5):value10pps(10):value15pps(15):value20pps(20):value25pps(25):value30pps(30),0. disable 
.1.3.6.1.4.1.11863.6.27.1.3.1.1.5,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPortConfigDeclineRateLimit,INTEGER,read-write,,current,disable(0):value5pps(5):value10pps(10):value15pps(15):value20pps(20):value25pps(25):value30pps(30),0. disable 
.1.3.6.1.4.1.11863.6.27.1.3.1.1.6,TPLINK-DHCPSNOOPING-MIB::dhcpSnoopingPortConfigPortLag,OCTET,read-only,,current,,The LAG to which the port belongs to.
.1.3.6.1.4.1.11863.6.27.2,TPLINK-DHCPSNOOPING-MIB::tplinkDhcpSnoopingNotifications,,,,,,
.1.3.6.1.4.1.11863.6.28,TPLINK-ARP-INSPECTION-MIB::tplinkArpInspectionMIB,,,,,,Private MIB for Arp Inspection configuration.
.1.3.6.1.4.1.11863.6.28.1,TPLINK-ARP-INSPECTION-MIB::tplinkArpInspectionMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.28.1.1,TPLINK-ARP-DETECTION-MIB::tpArpDetection,,,,,,
.1.3.6.1.4.1.11863.6.28.1.1.1,TPLINK-ARP-DETECTION-MIB::tpArpDetectionConfig,,,,,,
.1.3.6.1.4.1.11863.6.28.1.1.1.1,TPLINK-ARP-DETECTION-MIB::tpArpDetectionConfigEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.28.1.1.1.2,TPLINK-ARP-DETECTION-MIB::tpArpDetectionTrustPortTable,,not-accessible,,current,,A list of trusted port config entries. Here you can configure the Trusted Port.
.1.3.6.1.4.1.11863.6.28.1.1.1.2.1,TPLINK-ARP-DETECTION-MIB::tpArpDetectionTrustPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of arp defend trust port.
.1.3.6.1.4.1.11863.6.28.1.1.1.2.1.1,TPLINK-ARP-DETECTION-MIB::tpArpDetectionTrustPort,OCTET,read-only,,current,,The port for which the ARP Detect function is unnecessary as the Trusted Port.  The specific ports, such as up-linked port, routing port and LAG port,  should be set as Trusted Port. To ensure the normal communication of the switch,  please configure the ARP Trusted Port before enabling the ARP Detect function. 
.1.3.6.1.4.1.11863.6.28.1.1.1.2.1.2,TPLINK-ARP-DETECTION-MIB::tpArpDetectionTrustPortState,INTEGER,read-write,,current,trustful(1):untrusty(0),0. untrusty port 1. trustful port
.1.3.6.1.4.1.11863.6.28.1.1.1.2.1.3,TPLINK-ARP-DETECTION-MIB::tpArpDetectionTrustPortLag,OCTET,read-only,,current,,the lag the port belong to
.1.3.6.1.4.1.11863.6.28.1.1.2,TPLINK-ARP-DETECTION-MIB::tpArpDetectionStat,,,,,,
.1.3.6.1.4.1.11863.6.28.1.1.2.1,TPLINK-ARP-DETECTION-MIB::tpArpDetectionStatReset,INTEGER,read-write,,current,notReset(0):reset(1),0. notReset
.1.3.6.1.4.1.11863.6.28.1.1.2.2,TPLINK-ARP-DETECTION-MIB::tpArpDetectionStatTable,,not-accessible,,current,,A list of arp detection Stat entries. Here you can view the statistics of the illegal ARP packets received by each port.
.1.3.6.1.4.1.11863.6.28.1.1.2.2.1,TPLINK-ARP-DETECTION-MIB::tpArpDetectionStatEntry,,not-accessible,ifIndex,current,,An entry contains of the information of arp defend nonlegal pkt.
.1.3.6.1.4.1.11863.6.28.1.1.2.2.1.1,TPLINK-ARP-DETECTION-MIB::tpArpDetectionStatPort,OCTET,read-only,,current,,port number
.1.3.6.1.4.1.11863.6.28.1.1.2.2.1.2,TPLINK-ARP-DETECTION-MIB::tpArpDetectionStatState,INTEGER,read-only,,current,trustful(1):untrusty(0),0. untrusty port 1. trustful port
.1.3.6.1.4.1.11863.6.28.1.1.2.2.1.3,TPLINK-ARP-DETECTION-MIB::tpArpDetectionStatNonLegalPkt,Counter32,read-only,,current,,Displays the number of the received illegal ARP packets.
.1.3.6.1.4.1.11863.6.28.1.2,TPLINK-ARP-DEFEND-MIB::tpArpDefend,,,,,,
.1.3.6.1.4.1.11863.6.28.1.2.1,TPLINK-ARP-DEFEND-MIB::tpArpDefendConfig,,,,,,
.1.3.6.1.4.1.11863.6.28.1.2.1.1,TPLINK-ARP-DEFEND-MIB::tpArpDefendConfigTable,,not-accessible,,current,,A list of arp defend config entries. Here you can configure the ARP Defend feature.
.1.3.6.1.4.1.11863.6.28.1.2.1.1.1,TPLINK-ARP-DEFEND-MIB::tpArpDefendConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of arp defend attack config.
.1.3.6.1.4.1.11863.6.28.1.2.1.1.1.1,TPLINK-ARP-DEFEND-MIB::tpArpDefendConfigPort,OCTET,read-only,,current,,port number
.1.3.6.1.4.1.11863.6.28.1.2.1.1.1.2,TPLINK-ARP-DEFEND-MIB::tpArpDefendConfigEnable,INTEGER,read-write,,current,enable(1):disable(0),0. disable 1. enable Select Enable/Disable the ARP Defend feature for the port. 
.1.3.6.1.4.1.11863.6.28.1.2.1.1.1.3,TPLINK-ARP-DEFEND-MIB::tpArpDefendConfigRate,INTEGER,read-write,,current,,specify the maximum amount of the received ARP packets per second.(10-100pps)
.1.3.6.1.4.1.11863.6.28.1.2.1.1.1.4,TPLINK-ARP-DEFEND-MIB::tpArpDefendConfigState,OCTET,read-only,,current,,the state of port, when the rate exceed, the port will discard the arp pkt.
.1.3.6.1.4.1.11863.6.28.1.2.1.1.1.5,TPLINK-ARP-DEFEND-MIB::tpArpDefendConfigPortLag,OCTET,read-only,,current,,the lag the port belong to
.1.3.6.1.4.1.11863.6.28.2,TPLINK-ARP-INSPECTION-MIB::tplinkArpInspectionNotifications,,,,,,
.1.3.6.1.4.1.11863.6.29,TPLINK-IP-SOURCE-GUARD-MIB::tplinkIpSourceGuardMIB,,,,,,Private MIB for ip source guard configuration.
.1.3.6.1.4.1.11863.6.29.1,TPLINK-IP-SOURCE-GUARD-MIB::tplinkIpSourceGuardMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.29.1.1,TPLINK-IP-SOURCE-GUARD-MIB::tpIpSourceGuardConfig,,,,,,
.1.3.6.1.4.1.11863.6.29.1.1.1,TPLINK-IP-SOURCE-GUARD-MIB::tpIpSourceGuardConfigTable,,not-accessible,,current,,A list of ip source guard config entries. Here you can configure the IP Source Guard feature.
.1.3.6.1.4.1.11863.6.29.1.1.1.1,TPLINK-IP-SOURCE-GUARD-MIB::tpIpSourceGuardConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of ip source guard config.
.1.3.6.1.4.1.11863.6.29.1.1.1.1.1,TPLINK-IP-SOURCE-GUARD-MIB::tpIpSourceGuardConfigPort,OCTET,read-only,,current,,port number
.1.3.6.1.4.1.11863.6.29.1.1.1.1.2,TPLINK-IP-SOURCE-GUARD-MIB::tpIpSourceGuardConfigType,INTEGER,read-write,,current,disable(0):sip-mac(2),Select Security Type for the port. 0. disable: Select this option to disable the IP Source Guard feature for the port. 1. SIP: Only the packets with its source IP address and port number matched  to the IP-MAC binding rules can be processed.  2. SIP+MAC: Only the packets with its source IP address,  source MAC address and port number matched to the IP-MAC binding rules can be processed.
.1.3.6.1.4.1.11863.6.29.1.1.1.1.3,TPLINK-IP-SOURCE-GUARD-MIB::tpIpSourceGuardConfigPortLag,OCTET,read-only,,current,,the lag the port belong to
.1.3.6.1.4.1.11863.6.29.2,TPLINK-IP-SOURCE-GUARD-MIB::tplinkIpSourceGuardNotifications,,,,,,
.1.3.6.1.4.1.11863.6.30,TPLINK-DOS-PREVENTION-MIB::tplinkDosPreventionMIB,,,,,,Private MIB for DoS Defend configuration.
.1.3.6.1.4.1.11863.6.30.1,TPLINK-DOS-PREVENTION-MIB::tplinkDosPreventionMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.30.1.1,TPLINK-DOS-PREVENTION-MIB::tpDosDefendGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.30.1.1.1,TPLINK-DOS-PREVENTION-MIB::tpDosDefendGlobalEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.30.1.2,TPLINK-DOS-PREVENTION-MIB::tpDosDefendList,,,,,,
.1.3.6.1.4.1.11863.6.30.1.2.1,TPLINK-DOS-PREVENTION-MIB::tpDosDefendListTable,,not-accessible,,current,,A list of dos defend config entries. Here you can view and select the Defend Type for the switch.
.1.3.6.1.4.1.11863.6.30.1.2.1.1,TPLINK-DOS-PREVENTION-MIB::tpDosDefendListEntry,,not-accessible,tpDosDefendListIndex,current,,An entry contains of the information of dos defend index config.
.1.3.6.1.4.1.11863.6.30.1.2.1.1.1,TPLINK-DOS-PREVENTION-MIB::tpDosDefendListIndex,INTEGER,read-only,,current,,dos defend entry index
.1.3.6.1.4.1.11863.6.30.1.2.1.1.2,TPLINK-DOS-PREVENTION-MIB::tpDosDefendListType,OCTET,read-only,,current,,dos defend entry name
.1.3.6.1.4.1.11863.6.30.1.2.1.1.3,TPLINK-DOS-PREVENTION-MIB::tpDosDefendListEntryEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1. enable
.1.3.6.1.4.1.11863.6.30.2,TPLINK-DOS-PREVENTION-MIB::tplinkDosPreventionNotifications,,,,,,
.1.3.6.1.4.1.11863.6.31,TPLINK-8021X-MIB::tplink8021xMIB,,,,,,Private MIB for 802.1x configuration.
.1.3.6.1.4.1.11863.6.31.1,TPLINK-8021X-MIB::tplink8021xMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.31.1.1,TPLINK-8021X-MIB::tp8021xGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.31.1.1.1,TPLINK-8021X-MIB::tp8021xGlobalEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.31.1.1.2,TPLINK-8021X-MIB::tp8021xAuthMode,INTEGER,read-write,,current,pap(0):eap(1),Select the Authentication Method
.1.3.6.1.4.1.11863.6.31.1.1.3,TPLINK-8021X-MIB::tp8021xHandshake,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.31.1.1.4,TPLINK-8021X-MIB::tp8021xGuestVlanEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.31.1.1.5,TPLINK-8021X-MIB::tp8021xGuestVlanID,INTEGER,read-write,,current,,Enter your desired VLAN ID to enable the Guest VLAN feature. 
.1.3.6.1.4.1.11863.6.31.1.1.6,TPLINK-8021X-MIB::tp8021xQuietEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.31.1.1.7,TPLINK-8021X-MIB::tp8021xQuietPeriod,INTEGER,read-write,,current,,Specify a value for Quiet Period. Once the supplicant failed to the 802.1X Authentication,
.1.3.6.1.4.1.11863.6.31.1.1.8,TPLINK-8021X-MIB::tp8021xRetryTimes,INTEGER,read-write,,current,,Specify the maximum transfer times of the repeated authentication request.(1-9)
.1.3.6.1.4.1.11863.6.31.1.1.9,TPLINK-8021X-MIB::tp8021xSupplicantTimeOut,INTEGER,read-write,,current,,Specify the maximum time for the switch to wait for the response from supplicant 
.1.3.6.1.4.1.11863.6.31.1.1.10,TPLINK-8021X-MIB::tp8021xServerTimeOut,INTEGER,read-write,,current,,Specify the maximum time for the switch to wait for the response from authentication 
.1.3.6.1.4.1.11863.6.31.1.1.11,TPLINK-8021X-MIB::tp8021xAuthPrimaryIP,IpAddress,read-write,,current,,Enter the IP address of the authentication server.
.1.3.6.1.4.1.11863.6.31.1.1.12,TPLINK-8021X-MIB::tp8021xAuthSecondaryIP,IpAddress,read-write,,current,,Enter the IP address of the alternate authentication server.
.1.3.6.1.4.1.11863.6.31.1.1.13,TPLINK-8021X-MIB::tp8021xServerAuthPort,INTEGER,read-write,,current,,Set the UDP port of authentication server(s). The default port is 1812(1-65535)
.1.3.6.1.4.1.11863.6.31.1.1.14,TPLINK-8021X-MIB::tp8021xServerAuthKey,OCTET,read-write,,current,,Set the shared password for the switch and the authentication 
.1.3.6.1.4.1.11863.6.31.1.1.15,TPLINK-8021X-MIB::tp8021xAcctEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.31.1.1.16,TPLINK-8021X-MIB::tp8021xAcctPrimaryIP,IpAddress,read-write,,current,,Enter the IP address of the accounting server.
.1.3.6.1.4.1.11863.6.31.1.1.17,TPLINK-8021X-MIB::tp8021xAcctSecondaryIP,IpAddress,read-write,,current,,Enter the IP address of the alternate accounting server.
.1.3.6.1.4.1.11863.6.31.1.1.18,TPLINK-8021X-MIB::tp8021xAcctPort,INTEGER,read-write,,current,,Set the UDP port of accounting server(s). The default port is 1813(1-65535)
.1.3.6.1.4.1.11863.6.31.1.1.19,TPLINK-8021X-MIB::tp8021xAcctKey,OCTET,read-write,,current,,Set the shared password for the switch and the accounting servers to exchange messages. (0-31 characters).
.1.3.6.1.4.1.11863.6.31.1.2,TPLINK-8021X-MIB::tp8021xPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.31.1.2.1,TPLINK-8021X-MIB::tp8021xPortConfigTable,,not-accessible,,current,,A list of 8021x port config entries.
.1.3.6.1.4.1.11863.6.31.1.2.1.1,TPLINK-8021X-MIB::tp8021xPortConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of 8021x port config. Here you can configure the ports for the 802.1X authentication.
.1.3.6.1.4.1.11863.6.31.1.2.1.1.1,TPLINK-8021X-MIB::tp8021xPortConfigPortIndex,OCTET,read-only,,current,,This object indicates the port number.
.1.3.6.1.4.1.11863.6.31.1.2.1.1.2,TPLINK-8021X-MIB::tp8021xPortConfigEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.31.1.2.1.1.3,TPLINK-8021X-MIB::tp8021xPortConfigGuestVlanEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.31.1.2.1.1.4,TPLINK-8021X-MIB::tp8021xPortConfigControlMode,INTEGER,read-write,,current,forceAuth(0):forceUnAuth(1):autoAuth(2),Specify the Control Mode for the port.
.1.3.6.1.4.1.11863.6.31.1.2.1.1.5,TPLINK-8021X-MIB::tp8021xPortConfigControlType,INTEGER,read-write,,current,macBased(0):portBased(1),Specify the Control Type for the port.
.1.3.6.1.4.1.11863.6.31.1.2.1.1.6,TPLINK-8021X-MIB::tp8021xPortConfigAuthState,INTEGER,read-only,,current,unAuthorized(0):authorized(1),The authentication status of the port. 
.1.3.6.1.4.1.11863.6.31.1.2.1.1.7,TPLINK-8021X-MIB::tp8021xPortConfigPortLag,OCTET,read-only,,current,,the lag the port belong to
.1.3.6.1.4.1.11863.6.31.2,TPLINK-8021X-MIB::tplink8021xNotifications,,,,,,
.1.3.6.1.4.1.11863.6.32,TPLINK-SNMP-MIB::tplinkSnmpMIB,,,,,,Private MIB for snmp config.
.1.3.6.1.4.1.11863.6.32.1,TPLINK-SNMP-MIB::tplinkSnmpMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.32.1.1,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHost,,,,,,
.1.3.6.1.4.1.11863.6.32.1.1.1,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostTable,,not-accessible,,current,,A list of SNMP notification host control entries.
.1.3.6.1.4.1.11863.6.32.1.1.1.1,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostEntry,,not-accessible,tpSnmpNotificationHostIpAddr:tpSnmpNotificationHostUserName,current,, With the Notification function enabled, the switch 
.1.3.6.1.4.1.11863.6.32.1.1.1.1.1,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostIpAddr,IpAddress,read-only,,current,,IP Address of the management Host.
.1.3.6.1.4.1.11863.6.32.1.1.1.1.2,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostUserName,OCTET,read-only,,current,,The User name of the management station.
.1.3.6.1.4.1.11863.6.32.1.1.1.1.3,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostUDPPort,INTEGER,read-create,,current,, The number of the UDP port used to send notifications. 
.1.3.6.1.4.1.11863.6.32.1.1.1.1.4,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostSecMode,INTEGER,read-create,,current,v1(1):v2c(2):v3(3),The Security Model of the management station.
.1.3.6.1.4.1.11863.6.32.1.1.1.1.5,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostSecLev,INTEGER,read-create,,current,noAuthNoPriv(1):authNoPriv(2):authPriv(3),The Security Level for the SNMP v3 User.
.1.3.6.1.4.1.11863.6.32.1.1.1.1.6,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostNtfyType,INTEGER,read-create,,current,trap(1):inform(2),The type for the notifications.
.1.3.6.1.4.1.11863.6.32.1.1.1.1.7,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostRetry,INTEGER,read-create,,current,, Specify the amount of times the switch resends an inform request. The switch will 
.1.3.6.1.4.1.11863.6.32.1.1.1.1.8,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostTimeout,INTEGER,read-create,,current,, Specify the maximum time for the switch to wait for the response from the management 
.1.3.6.1.4.1.11863.6.32.1.1.1.1.9,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostRowStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),The status column has three defined values:
.1.3.6.1.4.1.11863.6.32.1.1.2,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6Table,,not-accessible,,current,,A list of SNMP notification host control entries, supports IPV6.
.1.3.6.1.4.1.11863.6.32.1.1.2.1,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6Entry,,not-accessible,tpSnmpNotificationHostV6Index,current,, With the Notification function enabled, the switch 
.1.3.6.1.4.1.11863.6.32.1.1.2.1.1,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6Index,INTEGER,not-accessible,,current,,The index to the conceptual row of the table. Negative numbers are not allowed. There are objects defined that point to conceptual rows of this table with this index value. Zero is used to denote that no corresponding row exists. Index values are assigned by the agent, and should not be reused but should continue to increase in value.
.1.3.6.1.4.1.11863.6.32.1.1.2.1.2,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6IpMode,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address.Type is IPv4 or IPv6
.1.3.6.1.4.1.11863.6.32.1.1.2.1.3,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6IpAddr,OCTET,read-create,,current,,IP Address of the management Host. Just input like a string.
.1.3.6.1.4.1.11863.6.32.1.1.2.1.4,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6UserName,OCTET,read-create,,current,,The User name of the management station.
.1.3.6.1.4.1.11863.6.32.1.1.2.1.5,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6UDPPort,INTEGER,read-create,,current,, The number of the UDP port used to send notifications. 
.1.3.6.1.4.1.11863.6.32.1.1.2.1.6,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6SecMode,INTEGER,read-create,,current,v1(1):v2c(2):v3(3),The Security Model of the management station.
.1.3.6.1.4.1.11863.6.32.1.1.2.1.7,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6SecLev,INTEGER,read-create,,current,noAuthNoPriv(1):authNoPriv(2):authPriv(3),The Security Level for the SNMP v3 User.
.1.3.6.1.4.1.11863.6.32.1.1.2.1.8,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6NtfyType,INTEGER,read-create,,current,trap(1):inform(2),The type for the notifications.
.1.3.6.1.4.1.11863.6.32.1.1.2.1.9,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6Retry,INTEGER,read-create,,current,, Specify the amount of times the switch resends an inform request. The switch will 
.1.3.6.1.4.1.11863.6.32.1.1.2.1.10,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6Timeout,INTEGER,read-create,,current,, Specify the maximum time for the switch to wait for the response from the management 
.1.3.6.1.4.1.11863.6.32.1.1.2.1.11,TPLINK-SNMPNOTIFICATIONHOST-MIB::tpSnmpNotificationHostV6RowStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),The status column has three defined values:
.1.3.6.1.4.1.11863.6.32.1.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonControl,,,,,,
.1.3.6.1.4.1.11863.6.32.1.2.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonStatisticsCtrl,,,,,,
.1.3.6.1.4.1.11863.6.32.1.2.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonStatsCtrlTable,,not-accessible,,current,,A list of SNMP RMON STATISTICS control entries.
.1.3.6.1.4.1.11863.6.32.1.2.1.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonStatsCtrlEntry,,not-accessible,tpSnmpRmonStatsCtrlIndex,current,, RMON (Remote Monitoring), basing on SNMP (Simple Network Management Protocol) architecture, functions to monitor the network. Statistics Group, as one of the commonly used RMON Groups, is used to collect the statistics of interfaces. 
.1.3.6.1.4.1.11863.6.32.1.2.1.1.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonStatsCtrlIndex,INTEGER,read-only,,current,,The index of this entry.
.1.3.6.1.4.1.11863.6.32.1.2.1.1.1.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonStatsCtrlDataSource,OCTET,read-create,,current,,This object identifies the source of the data that
.1.3.6.1.4.1.11863.6.32.1.2.1.1.1.3,TPLINK-SNMPRMON-MIB::tpSnmpRmonStatsCtrlOwner,OCTET,read-create,,current,,The owner of this entry.
.1.3.6.1.4.1.11863.6.32.1.2.1.1.1.4,TPLINK-SNMPRMON-MIB::tpSnmpRmonStatsCtrlRowStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status column has four defined values:
.1.3.6.1.4.1.11863.6.32.1.2.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrl,,,,,,
.1.3.6.1.4.1.11863.6.32.1.2.2.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlTable,,not-accessible,,current,,A list of SNMP RMON hisotry control entries.
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlEntry,,not-accessible,tpSnmpRmonHistoryCtrlIndex,current,, History Group is one of the commonly used RMON (Remote Monitoring) Groups. After a  history group is configured, the switch collects network statistics information  periodically, based on which the management station can monitor network effectively.
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlIndex,INTEGER,read-only,,current,,The index of this entry.
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlSourcePort,OCTET,read-write,,current,,The port from which the history samples were taken. Specify the port in form of 1/0/1.
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.3,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlInterval,INTEGER,read-write,,current,, The interval to take samplings from the port.
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.4,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlBucketsRequested,INTEGER,read-write,,current,,The requested number of discrete time intervals
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.5,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlOwner,OCTET,read-write,,current,,The name of the device or user that defined the entry.
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.6,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlStatus,INTEGER,read-write,,current,disable(0):enable(1),Enable/Disable the corresponding sampling entry.
.1.3.6.1.4.1.11863.6.32.1.2.2.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataTable,,not-accessible,,current,,A list of SNMP RMON hisotry data entries.
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataEntry,,not-accessible,tpSnmpRmonHistoryDataIndex,current,,Contains of the history data for a control entry
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataIndex,INTEGER,read-only,,current,,index
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataSampleIndex,INTEGER,read-only,,current,,An index that uniquely identifies the particular
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.3,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataIntervalStart,TimeTicks,read-only,,current,, The value of sysUpTime at the start of the interval
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.4,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataDropEvents,Counter32,read-only,,current,, The total number of events in which packets
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.5,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataOctets,Counter32,read-only,,current,, The total number of octets of data (including
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.6,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataPkts,Counter32,read-only,,current,, The number of packets (including bad packets)
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.7,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataBroadcastPkts,Counter32,read-only,,current,, The number of good packets received during this
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.8,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataMulticastPkts,Counter32,read-only,,current,, The number of good packets received during this
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.9,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataCRCAlignErrors,Counter32,read-only,,current,, The number of packets received during this sampling
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.10,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataUndersizePkts,Counter32,read-only,,current,, The number of packets received during this
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.11,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataOversizePkts,Counter32,read-only,,current,, The number of packets received during this
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.12,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataFragments,Counter32,read-only,,current,, The total number of packets received during this
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.13,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataJabbers,Counter32,read-only,,current,, The number of packets received during this
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.14,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataCollisions,Counter32,read-only,,current,, The number of collion received during this
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.15,TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataUtilization,INTEGER,read-only,,current,, The best estimate of the mean physical layer
.1.3.6.1.4.1.11863.6.32.1.2.3,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrl,,,,,,
.1.3.6.1.4.1.11863.6.32.1.2.3.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlTable,,not-accessible,,current,,A list of SNMP RMON EVENT control entries.
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlEntry,,not-accessible,tpSnmpRmonEventCtrlIndex,current,, RMON (Remote Monitoring), basing on SNMP (Simple Network Management Protocol) architecture, 
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlIndex,INTEGER,read-only,,current,,The index of this entry.
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlUserName,OCTET,read-write,,current,,The name of the User or the community to which the event belongs.
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.3,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlDesc,OCTET,read-write,,current,,Description which is given to the event for identification.
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.4,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlType,INTEGER,read-write,,current,none(1):log(2):snmptrap(3):logandtrap(4), The event type, which determines the act way of the network device in response to an event.
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.5,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlOwner,OCTET,read-write,,current,,The name of the device or user that defined the entry.
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.6,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlStatus,INTEGER,read-write,,current,disable(0):enable(1),Enable/Disable the corresponding event entry.
.1.3.6.1.4.1.11863.6.32.1.2.3.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventLogTable,,not-accessible,,current,,A list of log that have been logged.
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventLogEntry,,not-accessible,tpSnmpRmonEventLogEventIndex:tpSnmpRmonEventLogIndex,current,, A set of data describing an event that has been
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventLogEventIndex,INTEGER,read-only,,current,, The event entry that generated this log
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventLogIndex,INTEGER,read-only,,current,, An index that uniquely identifies an entry
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1.3,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventLogTime,TimeTicks,read-only,,current,,The value of sysUpTime when this log entry was created.
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1.4,TPLINK-SNMPRMON-MIB::tpSnmpRmonEventLogDescription,OCTET,read-only,,current,, An implementation dependent description of the
.1.3.6.1.4.1.11863.6.32.1.2.4,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrl,,,,,,
.1.3.6.1.4.1.11863.6.32.1.2.4.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlTable,,not-accessible,,current,,A list of SNMP RMON EVENT control entries.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlEntry,,not-accessible,tpSnmpRmonAlarmCtrlIndex,current,, Alarm Group is one of the commonly used RMON Groups. RMON alarm 
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.1,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlIndex,INTEGER,read-only,,current,,The index of this entry.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.2,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlVariable,INTEGER,read-write,,current,dropEvent(3):recBytes(4):recPackets(5):bPackets(6):mPackets(7):crcAlignErr(8):undersize(9):oversize(10):fragments(11):jabbers(12):collisions(13):packet64Bytes(14):packetFrom65to127(15):packetFrom128to255(16):packetFrom256to511(17):packetFrom512to1023(18):packetFrom1024to10240(19),The packet type that to be count.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.3,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlStatisticsIndex,INTEGER,read-write,,current,,The index of the statistics entry relative with this alarm entry.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.4,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlSampleType,INTEGER,read-write,,current,absoluteValue(1):deltaValue(2), The method of sampling the selected variable and calculating the value to be 
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.5,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlRisingThreshold,INTEGER,read-write,,current,,The rising counter value that triggers the rise hold alarm.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.6,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlRisingEvent,INTEGER,read-write,,current,, The index of the corresponding event which will be triggered if the sampled 
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.7,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlFallingThreshold,INTEGER,read-write,,current,,The falling counter value that triggers the fall hold alarm.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.8,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlFallingEvent,INTEGER,read-write,,current,, The index of the corresponding event which will be triggered if the sampled 
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.9,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlStartUp,INTEGER,read-write,,current,risingAlarm(1):fallingAlarm(2):risingOrFallingAlarm(3),Specify the type of the alarm.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.10,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlInterval,INTEGER,read-write,,current,,The alarm interval time in seconds.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.11,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlOwner,OCTET,read-write,,current,,The name of the device or user that defined the entry.
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.12,TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlStatus,INTEGER,read-write,,current,disable(0):enable(1),Enable/Disable the corresponding alarm entry.
.1.3.6.1.4.1.11863.6.32.2,TPLINK-SNMP-MIB::tplinkSnmpMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.33,TPLINK-CLUSTERTREE-MIB::tplinkClusterTreeMIB,,,,,,Private MIB for Cluster.
.1.3.6.1.4.1.11863.6.33.1,TPLINK-CLUSTERTREE-MIB::tplinkClusterMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.33.1.1,TPLINK-CLUSTER-MIB::tplinkClusterMIB,,,,,,Cluster Management function enables a network administer to 
.1.3.6.1.4.1.11863.6.33.1.1.1,TPLINK-CLUSTER-MIB::ndpManage,,,,,,
.1.3.6.1.4.1.11863.6.33.1.1.1.1,TPLINK-NDP-MIB::ndpGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.33.1.1.1.1.1,TPLINK-NDP-MIB::ndpStatus,INTEGER,read-write,,current,disable(0):enable(1),This object indicates the global status of the ndp.
.1.3.6.1.4.1.11863.6.33.1.1.1.1.2,TPLINK-NDP-MIB::ndpAgingTime,INTEGER,read-write,,current,,This object indicates the period for the switch to keep the NDP
.1.3.6.1.4.1.11863.6.33.1.1.1.1.3,TPLINK-NDP-MIB::ndpHelloTime,INTEGER,read-write,,current,,This object indicates the interval time of the switch in second
.1.3.6.1.4.1.11863.6.33.1.1.1.2,TPLINK-NDP-MIB::ndpPortTable,,not-accessible,,current,,A table that contains information about the ndp status of every port.
.1.3.6.1.4.1.11863.6.33.1.1.1.2.1,TPLINK-NDP-MIB::ndpPortEntry,,not-accessible,ifIndex,current,,A list of information about the ndp status.
.1.3.6.1.4.1.11863.6.33.1.1.1.2.1.2,TPLINK-NDP-MIB::ndpPortStatus,INTEGER,read-write,,current,disable(0):enable(1),This object indicates the ndp status of the port.
.1.3.6.1.4.1.11863.6.33.1.1.1.2.1.3,TPLINK-NDP-MIB::ndpPortRecvPkt,INTEGER,read-only,,current,,This object indicates the ndp packet that the port have receive.
.1.3.6.1.4.1.11863.6.33.1.1.1.2.1.4,TPLINK-NDP-MIB::ndpPortSendPkt,INTEGER,read-only,,current,,This object indicates the ndp packet that the port have send.
.1.3.6.1.4.1.11863.6.33.1.1.1.2.1.5,TPLINK-NDP-MIB::ndpPortErrPkt,INTEGER,read-only,,current,,This objcet indicates the error ndp packet that the port have receive.
.1.3.6.1.4.1.11863.6.33.1.1.1.2.1.6,TPLINK-NDP-MIB::ndpPortNeighborNum,INTEGER,read-only,,current,,This object indicates the number of the neighbor.
.1.3.6.1.4.1.11863.6.33.1.1.2,TPLINK-CLUSTER-MIB::ntdpManage,,,,,,
.1.3.6.1.4.1.11863.6.33.1.1.2.1,TPLINK-NTDP-MIB::ntdpGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.33.1.1.2.1.1,TPLINK-NTDP-MIB::ntdpStatus,INTEGER,read-write,,current,disable(0):enable(1),This object indicates the ntdp status of the port.
.1.3.6.1.4.1.11863.6.33.1.1.2.1.2,TPLINK-NTDP-MIB::ntdpIntervalTime,INTEGER,read-write,,current,,This object indicates the interval time of the switch in miniute to
.1.3.6.1.4.1.11863.6.33.1.1.2.1.3,TPLINK-NTDP-MIB::ntdpHop,INTEGER,read-write,,current,,This object indicates the hop count the switch topology collects.
.1.3.6.1.4.1.11863.6.33.1.1.2.1.4,TPLINK-NTDP-MIB::ntdpHopDelay,INTEGER,read-write,,current,,This object indicates the time between the switch receiving NTDP 
.1.3.6.1.4.1.11863.6.33.1.1.2.1.5,TPLINK-NTDP-MIB::ntpdPortDelay,INTEGER,read-write,,current,,This object indicates the time between the port forwarding NTDP request
.1.3.6.1.4.1.11863.6.33.1.1.2.2,TPLINK-NTDP-MIB::ntdpPortTable,,not-accessible,,current,,A table that contains ntdp information of every port.
.1.3.6.1.4.1.11863.6.33.1.1.2.2.1,TPLINK-NTDP-MIB::ntdpPortEntry,,not-accessible,ifIndex,current,,A list of ntdp information for every port of the device.
.1.3.6.1.4.1.11863.6.33.1.1.2.2.1.2,TPLINK-NTDP-MIB::ntdpPortStatus,INTEGER,read-write,,current,disable(0):enable(1),This object indicates the ntdp status of the port.
.1.3.6.1.4.1.11863.6.33.1.1.2.4,TPLINK-NTDP-MIB::ntdpCollectTopo,INTEGER,read-write,,current,commit(1),This object use to collect the topology.
.1.3.6.1.4.1.11863.6.33.1.1.3,TPLINK-CLUSTER-MIB::clusterManage,,,,,,
.1.3.6.1.4.1.11863.6.33.1.1.3.1,TPLINK-CLUSTERMANAGE-MIB::clusterRole,INTEGER,read-write,,current,commander(0):member(1):candidate(2):individual(3),This object indicates the current role of the switch.
.1.3.6.1.4.1.11863.6.33.1.1.3.2,TPLINK-COMMANDER-MIB::clusterConfig,,,,,,
.1.3.6.1.4.1.11863.6.33.1.1.3.2.1,TPLINK-COMMANDER-MIB::clusterName,OCTET,read-only,,current,,This object indicates the name of the cluster if the role of the switch
.1.3.6.1.4.1.11863.6.33.1.1.3.2.2,TPLINK-COMMANDER-MIB::clusterHoldTime,INTEGER,read-write,,current,,This object indicates the time that the cluster infomation will keep
.1.3.6.1.4.1.11863.6.33.1.1.3.2.3,TPLINK-COMMANDER-MIB::clusterIntervalTime,INTEGER,read-write,,current,,This object indicates the interval time of the switch in second to periodical send out handshake packet. The minimum valus is 1, maximum value is 255.
.1.3.6.1.4.1.11863.6.33.1.1.3.2.4,TPLINK-COMMANDER-MIB::commanderConfig,,,,,,
.1.3.6.1.4.1.11863.6.33.1.1.3.2.4.1,TPLINK-COMMANDER-MIB::commanderClusterName,OCTET,read-write,,current,,This object use to set the cluster name when building the cluster.
.1.3.6.1.4.1.11863.6.33.1.1.3.2.4.2,TPLINK-COMMANDER-MIB::clusterIp,IpAddress,read-write,,current,,This object use to set the cluster ip pool when building the cluster.
.1.3.6.1.4.1.11863.6.33.1.1.3.2.4.3,TPLINK-COMMANDER-MIB::clusterIpMask,IpAddress,read-write,,current,,This object use to set the cluster ip mask when building the cluster.
.1.3.6.1.4.1.11863.6.33.1.1.3.2.4.4,TPLINK-COMMANDER-MIB::clusterCommit,INTEGER,read-write,,current,commit(1),This object use to commit the data to build the cluster.
.1.3.6.1.4.1.11863.6.33.2,TPLINK-CLUSTERTREE-MIB::tplinkClusterNotifications,,,,,,
.1.3.6.1.4.1.11863.6.34,TPLINK-STACK-MIB::tplinkStackMIB,,,,,,This MIB module contain a collection of managed objects that apply to network devices with stack function.
.1.3.6.1.4.1.11863.6.34.1,TPLINK-STACK-MIB::tplinkStackMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.34.1.1,TPLINK-STACK-MIB::tpStackGlobal,,,,,,
.1.3.6.1.4.1.11863.6.34.1.1.1,TPLINK-STACK-MIB::tpStackName,OCTET,read-write,,current,,An unique tag for the stack system.
.1.3.6.1.4.1.11863.6.34.1.1.2,TPLINK-STACK-MIB::tpStackMacAddress,OCTET,read-only,,current,,The mac address the stack uses to communicate with other devices.
.1.3.6.1.4.1.11863.6.34.1.1.3,TPLINK-STACK-MIB::tpStackTopo,INTEGER,read-only,,current,line(0):ring(1),The current topo state of the stack.
.1.3.6.1.4.1.11863.6.34.1.1.4,TPLINK-STACK-MIB::tpStackAuthMode,INTEGER,read-write,,current,none(0):simple(1):md5(2),The authentication mode used in stack creation.
.1.3.6.1.4.1.11863.6.34.1.1.5,TPLINK-STACK-MIB::tpStackAuthKey,OCTET,read-write,,current,,The password to be used in stack authentication if the Stack Auth Mode is Simple or Md5.
.1.3.6.1.4.1.11863.6.34.1.2,TPLINK-STACK-MIB::tpStackInfo,,,,,,
.1.3.6.1.4.1.11863.6.34.1.2.1,TPLINK-STACK-MIB::tpSwitchInfoTable,,not-accessible,,current,,This table contains information specific to switches in a stack.
.1.3.6.1.4.1.11863.6.34.1.2.1.1,TPLINK-STACK-MIB::tpSwitchInfoEntry,,not-accessible,tpSwitchCurrentUnit,current,,A conceptual row in the switchInfoTable describing a switch information.
.1.3.6.1.4.1.11863.6.34.1.2.1.1.1,TPLINK-STACK-MIB::tpSwitchCurrentUnit,INTEGER,read-only,,current,unit-1(1):unit-2(2):unit-3(3):unit-4(4):unit-5(5):unit-6(6):unit-7(7):unit-8(8),This object contains the current switch identification number.
.1.3.6.1.4.1.11863.6.34.1.2.1.1.3,TPLINK-STACK-MIB::tpSwitchDesignatedUnit,INTEGER,read-write,,current,auto(-1):unit-1(1):unit-2(2):unit-3(3):unit-4(4):unit-5(5):unit-6(6):unit-7(7):unit-8(8),
.1.3.6.1.4.1.11863.6.34.1.2.1.1.4,TPLINK-STACK-MIB::tpSwitchRole,INTEGER,read-only,,current,slave(0):master(1),This object describes the function of the switch: slave - stack member. master - stack master.
.1.3.6.1.4.1.11863.6.34.1.2.1.1.5,TPLINK-STACK-MIB::tpSwitchPriority,INTEGER,read-write,,current,,A number containing the priority of a switch. The switch with the highest priority will become the master.
.1.3.6.1.4.1.11863.6.34.1.2.1.1.6,TPLINK-STACK-MIB::tpSwitchMacAddress,OCTET,read-only,,current,,The MAC address of the switch.
.1.3.6.1.4.1.11863.6.34.1.2.1.1.7,TPLINK-STACK-MIB::tpSwitchVersion,OCTET,read-only,,current,,The software version of the switch.
.1.3.6.1.4.1.11863.6.34.1.2.1.1.8,TPLINK-STACK-MIB::tpSwitchState,INTEGER,read-only,,current,init(1):disc(2):sync(3):ready(4):verMismatch(5),The current state of a switch: ready - The switch is now ready. verMismatch - The software version running on the master is different with this member.
.1.3.6.1.4.1.11863.6.34.1.2.2,TPLINK-STACK-MIB::tpStackPortInfoTable,,not-accessible,,current,,This table contains stackport specific information. There exists an entry in this table for every physical stack port that have an entry in the ifTable (IF-MIB).
.1.3.6.1.4.1.11863.6.34.1.2.2.1,TPLINK-STACK-MIB::tpStackPortInfoEntry,,not-accessible,ifIndex,current,,A conceptual row in the stackPortInfoTable. An entry contains information about a stackport.
.1.3.6.1.4.1.11863.6.34.1.2.2.1.1,TPLINK-STACK-MIB::tpStackPortEnable,INTEGER,read-write,,current,disable(0):enable(1),Whether the port is enable as a stack port. disable - Ethernet port mode. enable - Stack port mode.
.1.3.6.1.4.1.11863.6.34.1.2.2.1.2,TPLINK-STACK-MIB::tpStackPortStatus,INTEGER,read-only,,current,ok(1):down(2):authFail(3):ethernet(4),The state of the stackport. ok - Connected and operational. down - Link down. authFail - The stack port is link-up but no discovery packets received or
.1.3.6.1.4.1.11863.6.34.1.2.2.1.3,TPLINK-STACK-MIB::tpStackPortNeighbor,OCTET,read-only,,current,, The mac address of the switch directly links on the stack port.
.1.3.6.1.4.1.11863.6.34.2,TPLINK-STACK-MIB::tplinkStackNotifications,,,,,,
.1.3.6.1.4.1.11863.6.35,TPLINK-LLDP-MIB::tplinkLldpMIB,,,,,,LLDP Private MIB.
.1.3.6.1.4.1.11863.6.35.1,TPLINK-LLDP-MIB::tplinkLldpMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.35.1.1,TPLINK-LLDPCONFIG-MIB::lldpConfig,,,,,,
.1.3.6.1.4.1.11863.6.35.1.1.1,TPLINK-LLDPCONFIG-MIB::lldpGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.35.1.1.1.1,TPLINK-LLDPCONFIG-MIB::lldpGlobalConfigEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable LLDP function globally on the Switch. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.35.1.1.1.2,TPLINK-LLDPCONFIG-MIB::lldpGlobalConfigTxInterval,INTEGER,read-write,,current,,The interval of the local device send the LLDPDU to the neighbor device.
.1.3.6.1.4.1.11863.6.35.1.1.1.3,TPLINK-LLDPCONFIG-MIB::lldpGlobalConfigTtl,INTEGER,read-write,,current,,TTL multiplier determines the TTL value in the LLDPDU packet which the local device send to the neighbor device. TTL value is the time of the local information enabled in the neighbor device, TTL value = TTL multiplier * interval
.1.3.6.1.4.1.11863.6.35.1.1.1.4,TPLINK-LLDPCONFIG-MIB::lldpGlobalConfigTxDelay,INTEGER,read-write,,current,,The delay time of the local device send the LLDPDU packet to the neighbor device. When the config of the local device is changed, it will notify the neighbor device after the setting time delay, which can avoid continually sending the LLPDDU packet to the neighbor device when local device continually change the config.
.1.3.6.1.4.1.11863.6.35.1.1.1.5,TPLINK-LLDPCONFIG-MIB::lldpGlobalConfigInitDelay,INTEGER,read-write,,current,,When the LLDP mode is changed, the device will initialize after a setting time delay, which can avoid continually initialized when the device continually change the LLDP mode .
.1.3.6.1.4.1.11863.6.35.1.1.1.6,TPLINK-LLDPCONFIG-MIB::lldpGlobalConfigTrap,INTEGER,read-write,,current,,The interval of sending the trap information. When a trap event has happened,just as finded a new neighbor or the neighbor information has changed,the local device would send a trap information to the SNMP server.
.1.3.6.1.4.1.11863.6.35.1.1.1.7,TPLINK-LLDPCONFIG-MIB::lldpGlobalConfigFastCount,INTEGER,read-write,,current,,When the LLDP mode of the port changed from disable(or just receive) to send and receive(or just send), the quick send mechanism will be enabled for other device find the local device as fast as it can,and  at this time, the LLDP packet is sended per second, and it get right after sended the setting num LLDPDU packet.
.1.3.6.1.4.1.11863.6.35.1.1.2,TPLINK-LLDPCONFIG-MIB::lldpPortConfigTable,,not-accessible,,current,,A table that contains LLDP information of every port.
.1.3.6.1.4.1.11863.6.35.1.1.2.1,TPLINK-LLDPCONFIG-MIB::lldpPortConfigEntry,,not-accessible,ifIndex,current,,A list of LLDP information for every port of the device.
.1.3.6.1.4.1.11863.6.35.1.1.2.1.1,TPLINK-LLDPCONFIG-MIB::lldpConfigPortId,OCTET,read-only,,current,,The port id of the switch.
.1.3.6.1.4.1.11863.6.35.1.1.2.1.2,TPLINK-LLDPCONFIG-MIB::lldpConfigPortStatus,INTEGER,read-write,,current,disable(0):enableTx(1):enableRx(2):enableRxTx(3),Select Enable/Disable Tx/Rx for the Port.  0. Disable 1. EnableTx 2. EnableRx 3. EnableRxTx
.1.3.6.1.4.1.11863.6.35.1.1.2.1.3,TPLINK-LLDPCONFIG-MIB::lldpConfigPortSnmpNotifyEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Snmp Notify for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.4,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvDescr,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV description for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.5,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvSysCap,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV system cap for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.6,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvSysDescr,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV System description for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.7,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvSysName,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV System name for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.8,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvManageAddr,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV manage address for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.9,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvPortVlanId,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV port Vlan ID for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.10,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvProtoVlanId,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV Portocol VlanId for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.11,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvVlanName,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV Vlan name for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.12,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvLinkAggre,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV link aggre for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.13,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvPortStatus,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV port status for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.14,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvMaxFrame,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV max frame for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.1.2.1.15,TPLINK-LLDPCONFIG-MIB::lldpConfigPortTlvPower,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable TLV power for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.2,TPLINK-LLDPINFO-MIB::lldpInfo,,,,,,
.1.3.6.1.4.1.11863.6.35.1.2.1,TPLINK-LLDPINFO-MIB::lldpLocalInfoTable,,not-accessible,,current,,Local port information entries.
.1.3.6.1.4.1.11863.6.35.1.2.1.1,TPLINK-LLDPINFO-MIB::lldpLocalInfoEntry,,not-accessible,ifIndex,current,,An entry contains of the information of local port of the switch.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.1,TPLINK-LLDPINFO-MIB::lldpLocalPortId,OCTET,read-only,,current,,Displays the port index.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.2,TPLINK-LLDPINFO-MIB::lldpLocalChassisIdType,OCTET,read-only,,current,,Displays the type of the chassis ID.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.3,TPLINK-LLDPINFO-MIB::lldpLocalChassisId,OCTET,read-only,,current,,Displays the chassis ID.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.4,TPLINK-LLDPINFO-MIB::lldpLocalPortIdType,OCTET,read-only,,current,,Displays the type of the port ID.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.5,TPLINK-LLDPINFO-MIB::lldpLocalPortIdDescr,OCTET,read-only,,current,,Displays the description of the port ID.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.6,TPLINK-LLDPINFO-MIB::lldpLocalTtl,INTEGER,read-only,,current,,Displays the TTL.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.7,TPLINK-LLDPINFO-MIB::lldpLocalPortDescr,OCTET,read-only,,current,,Displays the port description.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.8,TPLINK-LLDPINFO-MIB::lldpLocalDeviceName,OCTET,read-only,,current,,Displays the system name.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.9,TPLINK-LLDPINFO-MIB::lldpLocalDeviceDescr,OCTET,read-only,,current,,Displays the system description.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.10,TPLINK-LLDPINFO-MIB::lldpLocalCapAvailable,OCTET,read-only,,current,,Displays the system capabilities supported.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.11,TPLINK-LLDPINFO-MIB::lldpLocalCapEnabled,OCTET,read-only,,current,,Displays the system capabilities enabled.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.12,TPLINK-LLDPINFO-MIB::lldpLocalManageIpAddr,IpAddress,read-only,,current,,Displays the management address.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.13,TPLINK-LLDPINFO-MIB::lldpLocalManageAddrType,OCTET,read-only,,current,,Displays the management address type.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.14,TPLINK-LLDPINFO-MIB::lldpLocalManageAddrInterfaceType,OCTET,read-only,,current,,Displays the management address interface type.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.15,TPLINK-LLDPINFO-MIB::lldpLocalManageAddrInterfaceId,INTEGER,read-only,,current,,Displays the management address interface ID.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.16,TPLINK-LLDPINFO-MIB::lldpLocalManageAddrOID,INTEGER,read-only,,current,,Displays the management address OID.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.17,TPLINK-LLDPINFO-MIB::lldpLocalPortAndProtocolVlanID,OCTET,read-only,,current,,Displays the port and protocol VLAN ID.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.18,TPLINK-LLDPINFO-MIB::lldpLocalVlanName,OCTET,read-only,,current,,Displays the port and protocol VLAN ID.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.19,TPLINK-LLDPINFO-MIB::lldpLocalAutoNegotiationSupported,INTEGER,read-only,,current,disable(0):enable(1),Displays the supported state of the auto-negotiation .
.1.3.6.1.4.1.11863.6.35.1.2.1.1.20,TPLINK-LLDPINFO-MIB::lldpLocalAutoNegotiationEnabled,INTEGER,read-only,,current,disable(0):enable(1),Displays the enabled state of the auto-negotiation .
.1.3.6.1.4.1.11863.6.35.1.2.1.1.21,TPLINK-LLDPINFO-MIB::lldpLocalOperMau,OCTET,read-only,,current,,Displays the OperMau.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.22,TPLINK-LLDPINFO-MIB::lldpLocalLinkAggregationSupported,INTEGER,read-only,,current,disable(0):enable(1),Displays the supported state of the link aggregation .
.1.3.6.1.4.1.11863.6.35.1.2.1.1.23,TPLINK-LLDPINFO-MIB::lldpLocalLinkAggregationEnabled,INTEGER,read-only,,current,disable(0):enable(1),Displays the enabled state of the link aggregation .
.1.3.6.1.4.1.11863.6.35.1.2.1.1.24,TPLINK-LLDPINFO-MIB::lldpLocalAggregationPortId,INTEGER,read-only,,current,,Displays the aggregation port id .
.1.3.6.1.4.1.11863.6.35.1.2.1.1.25,TPLINK-LLDPINFO-MIB::lldpLocalPowerPortClass,OCTET,read-only,,current,,Displays the power port class.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.26,TPLINK-LLDPINFO-MIB::lldpLocalPsePowerSupported,INTEGER,read-only,,current,disable(0):enable(1),Displays the supported state of the PSE power .
.1.3.6.1.4.1.11863.6.35.1.2.1.1.27,TPLINK-LLDPINFO-MIB::lldpLocalPsePowerEnabled,INTEGER,read-only,,current,disable(0):enable(1),Displays the enabled state of the PSE power.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.28,TPLINK-LLDPINFO-MIB::lldpLocalPsePairsControlAbility,INTEGER,read-only,,current,disable(0):enable(1),Displays the enabled state of the PSE pairs control.
.1.3.6.1.4.1.11863.6.35.1.2.1.1.29,TPLINK-LLDPINFO-MIB::lldpLocalMaximumFrameSize,INTEGER,read-only,,current,,Displays the size of the maximum frame.
.1.3.6.1.4.1.11863.6.35.1.2.2,TPLINK-LLDPINFO-MIB::lldpNeighborInfoTable,,not-accessible,,current,,Neighbor port information entries.
.1.3.6.1.4.1.11863.6.35.1.2.2.1,TPLINK-LLDPINFO-MIB::lldpNeighborInfoEntry,,not-accessible,ifIndex:lldpNeighborPortIndexId,current,,An entry contains of the information of neighbor port of the switch.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.1,TPLINK-LLDPINFO-MIB::lldpNeighborPortId,OCTET,read-only,,current,,Displays the port index.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.2,TPLINK-LLDPINFO-MIB::lldpNeighborPortIndexId,INTEGER,read-only,,current,,Displays the neighbor index.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.3,TPLINK-LLDPINFO-MIB::lldpNeighborChassisIdType,OCTET,read-only,,current,,Displays the type of the chassis ID.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.4,TPLINK-LLDPINFO-MIB::lldpNeighborChassisId,OCTET,read-only,,current,,Displays the chassis ID.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.5,TPLINK-LLDPINFO-MIB::lldpNeighborPortIdType,OCTET,read-only,,current,,Displays the type of the port ID.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.6,TPLINK-LLDPINFO-MIB::lldpNeighborPortIdDescr,OCTET,read-only,,current,,Displays the description of the port ID.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.7,TPLINK-LLDPINFO-MIB::lldpNeighborTtl,INTEGER,read-only,,current,,Displays the TTL.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.8,TPLINK-LLDPINFO-MIB::lldpNeighborPortDescr,OCTET,read-only,,current,,Displays the port description.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.9,TPLINK-LLDPINFO-MIB::lldpNeighborDeviceName,OCTET,read-only,,current,,Displays the system name.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.10,TPLINK-LLDPINFO-MIB::lldpNeighborDeviceDescr,OCTET,read-only,,current,,Displays the system description.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.11,TPLINK-LLDPINFO-MIB::lldpNeighborCapAvailable,OCTET,read-only,,current,,Displays the system capabilities supported.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.12,TPLINK-LLDPINFO-MIB::lldpNeighborCapEnabled,OCTET,read-only,,current,,Displays the system capabilities enabled.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.13,TPLINK-LLDPINFO-MIB::lldpNeighborManageIpAddr,IpAddress,read-only,,current,,Displays the management address.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.14,TPLINK-LLDPINFO-MIB::lldpNeighborManageAddrType,OCTET,read-only,,current,,Displays the management address type.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.15,TPLINK-LLDPINFO-MIB::lldpNeighborManageAddrInterfaceType,OCTET,read-only,,current,,Displays the management address interface type.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.16,TPLINK-LLDPINFO-MIB::lldpNeighborManageAddrInterfaceId,INTEGER,read-only,,current,,Displays the management address interface ID.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.17,TPLINK-LLDPINFO-MIB::lldpNeighborManageAddrOID,INTEGER,read-only,,current,,Displays the management address OID.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.18,TPLINK-LLDPINFO-MIB::lldpNeighborPortAndProtocolVlanID,OCTET,read-only,,current,,Displays the port and protocol VLAN ID tlv.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.19,TPLINK-LLDPINFO-MIB::lldpNeighborVlanName,OCTET,read-only,,current,,Displays the VLAN name tlv.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.20,TPLINK-LLDPINFO-MIB::lldpNeighborProtocolIdentity,OCTET,read-only,,current,,Displays the protocol identity tlv.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.21,TPLINK-LLDPINFO-MIB::lldpNeighborAutoNegotiationSupported,INTEGER,read-only,,current,disable(0):enable(1),Displays the supported state of the auto-negotiation .
.1.3.6.1.4.1.11863.6.35.1.2.2.1.22,TPLINK-LLDPINFO-MIB::lldpNeighborAutoNegotiationEnabled,INTEGER,read-only,,current,disable(0):enable(1),Displays the enabled state of the auto-negotiation .
.1.3.6.1.4.1.11863.6.35.1.2.2.1.23,TPLINK-LLDPINFO-MIB::lldpNeighborOperMau,OCTET,read-only,,current,,Displays the OperMau.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.24,TPLINK-LLDPINFO-MIB::lldpNeighborLinkAggregationSupported,INTEGER,read-only,,current,disable(0):enable(1),Displays the supported state of the link aggregation .
.1.3.6.1.4.1.11863.6.35.1.2.2.1.25,TPLINK-LLDPINFO-MIB::lldpNeighborLinkAggregationEnabled,INTEGER,read-only,,current,disable(0):enable(1),Displays the enabled state of the link aggregation .
.1.3.6.1.4.1.11863.6.35.1.2.2.1.26,TPLINK-LLDPINFO-MIB::lldpNeighborAggregationPortId,INTEGER,read-only,,current,,Displays the aggregation port id .
.1.3.6.1.4.1.11863.6.35.1.2.2.1.27,TPLINK-LLDPINFO-MIB::lldpNeighborPowerPortClass,OCTET,read-only,,current,,Displays the power port class.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.28,TPLINK-LLDPINFO-MIB::lldpNeighborPsePowerSupported,INTEGER,read-only,,current,disable(0):enable(1),Displays the supported state of the PSE power .
.1.3.6.1.4.1.11863.6.35.1.2.2.1.29,TPLINK-LLDPINFO-MIB::lldpNeighborPsePowerEnabled,INTEGER,read-only,,current,disable(0):enable(1),Displays the enabled state of the PSE power.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.30,TPLINK-LLDPINFO-MIB::lldpNeighborPsePairsControlAbility,INTEGER,read-only,,current,disable(0):enable(1),Displays the enabled state of the PSE pairs control.
.1.3.6.1.4.1.11863.6.35.1.2.2.1.31,TPLINK-LLDPINFO-MIB::lldpNeighborMaximumFrameSize,INTEGER,read-only,,current,,Displays the size of the maximum frame.
.1.3.6.1.4.1.11863.6.35.1.3,TPLINK-LLDPCOUNT-MIB::lldpCount,,,,,,
.1.3.6.1.4.1.11863.6.35.1.3.1,TPLINK-LLDPCOUNT-MIB::lldpGlobalCount,,,,,,
.1.3.6.1.4.1.11863.6.35.1.3.1.1,TPLINK-LLDPCOUNT-MIB::lldpGlobalCountUpdateTime,OCTET,read-only,,current,,The time how long the information has updated.
.1.3.6.1.4.1.11863.6.35.1.3.1.2,TPLINK-LLDPCOUNT-MIB::lldpGlobalCountNeighborInserted,INTEGER,read-only,,current,,Display the newest number of the neighbor.
.1.3.6.1.4.1.11863.6.35.1.3.1.3,TPLINK-LLDPCOUNT-MIB::lldpGlobalCountNeighborDeleted,INTEGER,read-only,,current,,Display how many neighbors the local device has deleted.
.1.3.6.1.4.1.11863.6.35.1.3.1.4,TPLINK-LLDPCOUNT-MIB::lldpGlobalCountNeighborDroped,INTEGER,read-only,,current,,Display how many neighbors the local device has discarded.
.1.3.6.1.4.1.11863.6.35.1.3.1.5,TPLINK-LLDPCOUNT-MIB::lldpGlobalCountNeighborAged,INTEGER,read-only,,current,,Display how many neighbors was time out in the local device.
.1.3.6.1.4.1.11863.6.35.1.3.2,TPLINK-LLDPCOUNT-MIB::lldpCountNeighborInfoTable,,not-accessible,,current,,The statistic information entries of the neighbor device.
.1.3.6.1.4.1.11863.6.35.1.3.2.1,TPLINK-LLDPCOUNT-MIB::lldpCountNeighborInfoEntry,,not-accessible,ifIndex,current,,An entry contains of the information of the neighboe device.
.1.3.6.1.4.1.11863.6.35.1.3.2.1.1,TPLINK-LLDPCOUNT-MIB::lldpCountNeighborPortId,OCTET,read-only,,current,,Displays the port ID of the switch.
.1.3.6.1.4.1.11863.6.35.1.3.2.1.2,TPLINK-LLDPCOUNT-MIB::lldpNeighborFramesOut,INTEGER,read-only,,current,,Displays the number of the frames sent by this port.
.1.3.6.1.4.1.11863.6.35.1.3.2.1.3,TPLINK-LLDPCOUNT-MIB::lldpNeighborFramesIn,INTEGER,read-only,,current,,Displays the number of the frames received by this port.
.1.3.6.1.4.1.11863.6.35.1.3.2.1.4,TPLINK-LLDPCOUNT-MIB::lldpNeighborFramesDiscarded,INTEGER,read-only,,current,,Displays the number of the frams discarded by this port.
.1.3.6.1.4.1.11863.6.35.1.3.2.1.5,TPLINK-LLDPCOUNT-MIB::lldpNeighborFramesInErrors,INTEGER,read-only,,current,,Displays the number of the error frames recived by this port.
.1.3.6.1.4.1.11863.6.35.1.3.2.1.6,TPLINK-LLDPCOUNT-MIB::lldpNeighborAgeOuts,INTEGER,read-only,,current,,Displays the number of the time out neighbor which connected to this port.
.1.3.6.1.4.1.11863.6.35.1.3.2.1.7,TPLINK-LLDPCOUNT-MIB::lldpNeighborTlvDiscarded,INTEGER,read-only,,current,,Displays the number of discarded TLV when this port received LLDPDU.
.1.3.6.1.4.1.11863.6.35.1.3.2.1.8,TPLINK-LLDPCOUNT-MIB::lldpNeighborTlvUnrecognized,INTEGER,read-only,,current,,Displays the number of the unrecognized TLV when this port received LLDPDU.
.1.3.6.1.4.1.11863.6.35.1.4,TPLINK-LLDPMEDCONFIG-MIB::lldpMed,,,,,,
.1.3.6.1.4.1.11863.6.35.1.4.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.35.1.4.1.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedGlobalConfigFastStartRepeatCount,INTEGER,read-write,,current,,When entering LLDP-MED fast start mechanism, multiple LLDP-MED frames will be transmitted based on this parameter.
.1.3.6.1.4.1.11863.6.35.1.4.2,TPLINK-LLDPMEDCONFIG-MIB::lldpMedPortConfigTable,,not-accessible,,current,,A table that contains LLDP-MED information of every port.
.1.3.6.1.4.1.11863.6.35.1.4.2.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedPortConfigEntry,,not-accessible,ifIndex,current,,A list of LLDP-MED information for every port of the device.
.1.3.6.1.4.1.11863.6.35.1.4.2.1.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortId,OCTET,read-only,,current,,The port id of the switch.
.1.3.6.1.4.1.11863.6.35.1.4.2.1.2,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortStatus,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable LLDP-MED for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.4.2.1.3,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortTlvNetworkPolicy,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Network Policy TLV for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.4.2.1.4,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortTlvLocationId,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Location Identification TLV for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.4.2.1.5,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortTlvExtendedPower,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Extended Power-Via-MDI TLV for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.4.2.1.6,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortTlvInventory,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Inventory TLV for the Port.  0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.35.1.4.3,TPLINK-LLDPMEDCONFIG-MIB::lldpMedPortConfigTlvLocationTable,,not-accessible,,current,,A table that contains LLDP-MED Location Identification TLV information of every port.
.1.3.6.1.4.1.11863.6.35.1.4.3.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedPortConfigTlvLocationEntry,,not-accessible,ifIndex,current,,A list of LLDP-MED Location Identification TLV information for every port of the device.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigLocationPortId,OCTET,read-only,,current,,The port id of the switch.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.2,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationEmergencyNumber,OCTET,read-write,,current,,Emergency number is Emergency Call Service ELIN identifier, which is used during emergency 
.1.3.6.1.4.1.11863.6.35.1.4.3.1.3,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressWhat,INTEGER,read-write,,current,dhcp-server(0):switch(1):lldp-med-endpoint(2),This element describes which location the DHCP entry refers to. Currently, three options are 
.1.3.6.1.4.1.11863.6.35.1.4.3.1.4,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressCountryCode,OCTET,read-write,,current,,The two-letters ISO 3166 country code in capital ASCII letters, e.g., CN or US.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.5,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressLanguage,OCTET,read-write,,current,,Language.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.6,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressProvince,OCTET,read-write,,current,,Province or State.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.7,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressCounty,OCTET,read-write,,current,,County.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.8,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressCity,OCTET,read-write,,current,,City.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.9,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressStreet,OCTET,read-write,,current,,Street.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.10,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressHouseNumber,OCTET,read-write,,current,,House number.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.11,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressName,OCTET,read-write,,current,,Residence and office occupant name.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.12,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressPostalZipCode,OCTET,read-write,,current,,Postal/zip code.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.13,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressRoomNumber,OCTET,read-write,,current,,Room number.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.14,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressPostOfficeBox,OCTET,read-write,,current,,Post office box.
.1.3.6.1.4.1.11863.6.35.1.4.3.1.15,TPLINK-LLDPMEDCONFIG-MIB::lldpMedConfigPortLocationCivicAddressAdditional,OCTET,read-write,,current,,Additional information.
.1.3.6.1.4.1.11863.6.35.1.4.4,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInfoTable,,not-accessible,,current,,Local port LLDP-MED information entries.
.1.3.6.1.4.1.11863.6.35.1.4.4.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInfoEntry,,not-accessible,ifIndex,current,,An entry contains of the LLDP-MED information of local port of the switch.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalPortId,OCTET,read-only,,current,,Display the port index.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.2,TPLINK-LLDPMEDCONFIG-MIB::lldpMEDLocalCapabilities,OCTET,read-only,,current,,Display the LLDP-MED capabilities the switch supports.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.3,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalDeviceType,OCTET,read-only,,current,,LLDP-MED devices are comprised of two primary device types: Network Connectivity Devices 
.1.3.6.1.4.1.11863.6.35.1.4.4.1.4,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalApplicationType,OCTET,read-only,,current,,Display the primary function of the applications defined for the network policy.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.5,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalUnknownPolicy,OCTET,read-only,,current,,A value of 'Yes' indicates that the network policy for the specified application type is currently
.1.3.6.1.4.1.11863.6.35.1.4.4.1.6,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalAppTagged,OCTET,read-only,,current,,Indicate whether the specified application type is using a 'tagged' or an 'untagged' VLAN.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.7,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalAppVLANID,INTEGER,read-only,,current,,An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.8,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalAppLayer2Priority,INTEGER,read-only,,current,,Contain the value of the 802.1p priority which is associated with the given port on the 
.1.3.6.1.4.1.11863.6.35.1.4.4.1.9,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalAppDSCP,INTEGER,read-only,,current,,Contain the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474
.1.3.6.1.4.1.11863.6.35.1.4.4.1.10,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalLocationDataFormat,OCTET,read-only,,current,,The location subtype advertised by the local system.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.11,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalLocationID,OCTET,read-only,,current,,The location information. Parsing of this information is depedent upon the location subtype.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.12,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalPowerType,OCTET,read-only,,current,,Defines the type of Power-Via-MDI advertised by the local device.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.13,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalPowerSource,OCTET,read-only,,current,,Defines the type of PSE Power Source advertised by the local device.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.14,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalPowerPriority,OCTET,read-only,,current,,Reflects the PD power priority that is being advertised on this PSE port.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.15,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalPowerValue,OCTET,read-only,,current,,Contain the value of the power available from the PSE via this port.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.16,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInventoryHardwareRevision,OCTET,read-only,,current,,The vendor-specific hardware revision string as advertised by the local system.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.17,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInventoryFirmwareRevision,OCTET,read-only,,current,,The vendor-specific firmware revision string as advertised by the local system.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.18,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInventorySoftwareRevision,OCTET,read-only,,current,,The vendor-specific software revision string as advertised by the local system.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.19,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInventorySerialNumber,OCTET,read-only,,current,,The vendor-specific serial number as advertised by the local system.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.20,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInventoryManufacturerName,OCTET,read-only,,current,,The vendor-specific manufacturer name as advertised by the local system.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.21,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInventoryModelName,OCTET,read-only,,current,,The vendor-specific model name as advertised by the local system.
.1.3.6.1.4.1.11863.6.35.1.4.4.1.22,TPLINK-LLDPMEDCONFIG-MIB::lldpMedLocalInventoryAssetID,OCTET,read-only,,current,,The vendor-specific asset tracking identifier as advertised by the local system.
.1.3.6.1.4.1.11863.6.35.1.4.5,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInfo,,,,,,LLDP-MED Private MIB.
.1.3.6.1.4.1.11863.6.35.1.4.5.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInfoTable,,not-accessible,,current,,Neighbor port information entries.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInfoEntry,,not-accessible,ifIndex:lldpMedNeighborPortIndexId,current,,An entry contains of the information of neighbor port except the network policy information.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborPortId,OCTET,read-only,,current,,Display the port index.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.2,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborPortIndexId,INTEGER,read-only,,current,,Display the neighbor index.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.3,TPLINK-LLDPMEDCONFIG-MIB::lldpMEDNeighborCapabilities,OCTET,read-only,,current,,LLDP-MED capabilities of remote devices connected to the device ports and
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.4,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborDeviceType,OCTET,read-only,,current,,Device Class as advertised by the device remotely connected to the port.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.5,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborLocationDataFormat,OCTET,read-only,,current,,The location subtype advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.6,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborLocationID,OCTET,read-only,,current,,The location information advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.7,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborPowerType,OCTET,read-only,,current,,Defines the type of Power-Via-MDI advertised by the remote device.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.8,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborPowerSource,OCTET,read-only,,current,,Defines the type of Power Source advertised as being used by the device
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.9,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborPowerPriority,OCTET,read-only,,current,,Definces the priority advertised as being required by the PD connected 
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.10,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborPowerValue,OCTET,read-only,,current,,Conatin the value of the power required by a PD connected remotely to the port.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.11,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInventoryHardwareRevision,OCTET,read-only,,current,,The vendor-specific hardware revision string as advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.12,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInventoryFirmwareRevision,OCTET,read-only,,current,,The vendor-specific firmware revision string as advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.13,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInventorySoftwareRevision,OCTET,read-only,,current,,The vendor-specific software revision string as advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.14,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInventorySerialNumber,OCTET,read-only,,current,,The vendor-specific serial number as advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.15,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInventoryManufacturerName,OCTET,read-only,,current,,The vendor-specific manufacturer name as advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.16,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInventoryModelName,OCTET,read-only,,current,,The vendor-specific model name as advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.1.1.17,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborInventoryAssetID,OCTET,read-only,,current,,The vendor-specific asset tracking identifier as advertised by the remote endpoint.
.1.3.6.1.4.1.11863.6.35.1.4.5.2,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborMediaPolicyInfoTable,,not-accessible,,current,,Neighbor port media policy information entries.
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborMediaPolicyInfoEntry,,not-accessible,ifIndex:lldpMedNeighborPortIndex:lldpMedNeighborMediaPolicyIndex,current,,Information about a particular policy on a specific port component.
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.1,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborPort,OCTET,read-only,,current,,Display the port index.
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.2,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborPortIndex,INTEGER,read-only,,current,,Display the neighbor index.
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.3,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborMediaPolicyIndex,INTEGER,read-only,,current,,Display the neighbor media policy index.
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.4,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborApplicationType,OCTET,read-only,,current,,The media type that defines the primary function of the application for the
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.5,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborUnknownPolicy,OCTET,read-only,,current,,A value of 'Yes' indicates that the network policy for the specified application
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.6,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborAppTagged,OCTET,read-only,,current,,Indicate whether the specified application type is using a 'tagged' or an 'untagged' VLAN.
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.7,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborAppVLANID,INTEGER,read-only,,current,,An extension of the VLAN Identifier for the remote system connected to this port,
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.8,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborAppLayer2Priority,INTEGER,read-only,,current,,Contain the value of the 802.1p priority which is associated with the remote
.1.3.6.1.4.1.11863.6.35.1.4.5.2.1.9,TPLINK-LLDPMEDCONFIG-MIB::lldpMedNeighborAppDSCP,INTEGER,read-only,,current,,Contain the value of the Differentiated Service Code Point (DSCP) as defined
.1.3.6.1.4.1.11863.6.35.2,TPLINK-LLDP-MIB::tplinkLldpMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.35.2.1,TPLINK-LLDPCOUNT-MIB::lldpNeighborChange,,,,,,
.1.3.6.1.4.1.11863.6.36,TPLINK-STATICROUTE-MIB::tplinkStaticRouteMIB,,,,,,Private MIB for static route configuration.
.1.3.6.1.4.1.11863.6.36.1,TPLINK-STATICROUTE-MIB::tplinkStaticRouteMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.36.1.1,TPLINK-STATICROUTE-MIB::tpStaticRouteConfig,,,,,,
.1.3.6.1.4.1.11863.6.36.1.1.1,TPLINK-STATICROUTE-MIB::tpStaticRouteConfigTable,,not-accessible,,current,,A list of static route entries.Route is choosing a best way to trasmit the data from the source to the destination.Static route is a special route,it is set by the administrator,and it is not automatically changed along with the change of network topo, so the static route is most used in the net which is small and has a fixed topo with  virtues of simple,efficient and reliable.
.1.3.6.1.4.1.11863.6.36.1.1.1.1,TPLINK-STATICROUTE-MIB::tpStaticRouteConfigEntry,,not-accessible,tpStaticRouteItemDesIp:tpStaticRouteItemMask:tpStaticRouteItemNextIp,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.36.1.1.1.1.1,TPLINK-STATICROUTE-MIB::tpStaticRouteItemDesIp,IpAddress,read-only,,current,,The ip Address of the packet should be arrived
.1.3.6.1.4.1.11863.6.36.1.1.1.1.2,TPLINK-STATICROUTE-MIB::tpStaticRouteItemMask,IpAddress,read-only,,current,,The mask of the ip.
.1.3.6.1.4.1.11863.6.36.1.1.1.1.3,TPLINK-STATICROUTE-MIB::tpStaticRouteItemNextIp,IpAddress,read-create,,current,,The next jump ip address which the packet would be sent to by the switch.
.1.3.6.1.4.1.11863.6.36.1.1.1.1.4,TPLINK-STATICROUTE-MIB::tpStaticRouteItemInterfaceName,OCTET,read-only,,current,,The name of the VLAN interface.
.1.3.6.1.4.1.11863.6.36.1.1.1.1.5,TPLINK-STATICROUTE-MIB::tpStaticRouteItemStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.36.2,TPLINK-STATICROUTE-MIB::tplinkStaticRouteNotifications,,,,,,
.1.3.6.1.4.1.11863.6.37,TPLINK-PROXYARP-MIB::tplinkProxyArpMIB,,,,,,Private MIB for proxy arp configuration.
.1.3.6.1.4.1.11863.6.37.1,TPLINK-PROXYARP-MIB::tpProxyArpConfig,,,,,,
.1.3.6.1.4.1.11863.6.37.1.1,TPLINK-PROXYARP-MIB::tpProxyArpTable,,not-accessible,,current,,Proxy Arp.
.1.3.6.1.4.1.11863.6.37.1.1.1,TPLINK-PROXYARP-MIB::tpProxyArpEntry,,not-accessible,tpProxyArpVlanId,current,,An entry contains of the information of port configure.
.1.3.6.1.4.1.11863.6.37.1.1.1.1,TPLINK-PROXYARP-MIB::tpProxyArpVlanId,INTEGER,read-only,,current,,The vlan id of the proxy arp ip address
.1.3.6.1.4.1.11863.6.37.1.1.1.2,TPLINK-PROXYARP-MIB::tpProxyArpIpAddr,IpAddress,read-only,,current,,Displays the proxy arp ip address.
.1.3.6.1.4.1.11863.6.37.1.1.1.3,TPLINK-PROXYARP-MIB::tpProxyArpIpMask,IpAddress,read-only,,current,,Displays the proxy arp ip address mask
.1.3.6.1.4.1.11863.6.37.1.1.1.4,TPLINK-PROXYARP-MIB::tpProxyArpInterfaceName,OCTET,read-only,,current,,Displays the interface name.
.1.3.6.1.4.1.11863.6.37.1.1.1.5,TPLINK-PROXYARP-MIB::tpProxyArpEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Fast Leave feature for the IP address. 
.1.3.6.1.4.1.11863.6.37.2,TPLINK-PROXYARP-MIB::tplinkProxyArpNotifications,,,,,,
.1.3.6.1.4.1.11863.6.38,TPLINK-DHCPSERVER-MIB::tplinkDhcpServerMIB,,,,,,This MIB module contain a collection of managed objects that apply to network devices with Dhcp Server function.
.1.3.6.1.4.1.11863.6.38.1,TPLINK-DHCPSERVER-MIB::tplinkDhcpServerMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.38.1.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable DHCP server function globally on the Switch.
.1.3.6.1.4.1.11863.6.38.1.2,TPLINK-DHCPSERVER-MIB::tpDhcpServerVendorClassId,OCTET,read-write,,current,,Configure DHCP option 60 field.
.1.3.6.1.4.1.11863.6.38.1.3,TPLINK-DHCPSERVER-MIB::tpDhcpServerCapwapAcIp,IpAddress,read-write,,current,,Configure DHCP option 138 field.
.1.3.6.1.4.1.11863.6.38.1.4,TPLINK-DHCPSERVER-MIB::tpDhcpServerUnusedIpTable,,not-accessible,,current,,A list of distributed IP entries by the DHCP server.
.1.3.6.1.4.1.11863.6.38.1.4.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerUnusedIpEntry,,not-accessible,tpDhcpServerUnusedStartIp,current,, A group of IP entries.
.1.3.6.1.4.1.11863.6.38.1.4.1.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerUnusedStartIp,IpAddress,read-only,,current,,Every DHCP Server own a lot of ip address ,here is the start unused ip address.
.1.3.6.1.4.1.11863.6.38.1.4.1.2,TPLINK-DHCPSERVER-MIB::tpDhcpServerUnusedEndIp,IpAddress,read-create,,current,,The end unused ip address of the DHCP server.
.1.3.6.1.4.1.11863.6.38.1.4.1.3,TPLINK-DHCPSERVER-MIB::tpDhcpServerUnusedIpStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states:
.1.3.6.1.4.1.11863.6.38.1.5,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolTable,,not-accessible,,current,,A list of entries in DHCP server address pool.
.1.3.6.1.4.1.11863.6.38.1.5.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolEntry,,not-accessible,tpDhcpServerAddrPoolNetwork,current,, A group of IP entries.
.1.3.6.1.4.1.11863.6.38.1.5.1.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolName,OCTET,read-create,,current,,The entry name.
.1.3.6.1.4.1.11863.6.38.1.5.1.2,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNetwork,IpAddress,read-create,,current,,The address of network.
.1.3.6.1.4.1.11863.6.38.1.5.1.3,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolSubnetMask,IpAddress,read-create,,current,,The address of subnet mask.
.1.3.6.1.4.1.11863.6.38.1.5.1.4,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolRentTime,INTEGER,read-create,,current,,The rent time.
.1.3.6.1.4.1.11863.6.38.1.5.1.5,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolGateWayA,IpAddress,read-create,,current,,The address of gateway.
.1.3.6.1.4.1.11863.6.38.1.5.1.6,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolGateWayB,IpAddress,read-create,,current,,The address of gateway.
.1.3.6.1.4.1.11863.6.38.1.5.1.7,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolGateWayC,IpAddress,read-create,,current,,The address of gateway.
.1.3.6.1.4.1.11863.6.38.1.5.1.8,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolGateWayD,IpAddress,read-create,,current,,The address of gateway.
.1.3.6.1.4.1.11863.6.38.1.5.1.9,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolGateWayE,IpAddress,read-create,,current,,The address of gateway.
.1.3.6.1.4.1.11863.6.38.1.5.1.10,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolGateWayF,IpAddress,read-create,,current,,The address of gateway.
.1.3.6.1.4.1.11863.6.38.1.5.1.11,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolGateWayG,IpAddress,read-create,,current,,The address of gateway.
.1.3.6.1.4.1.11863.6.38.1.5.1.12,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolGateWayH,IpAddress,read-create,,current,,The address of gateway.
.1.3.6.1.4.1.11863.6.38.1.5.1.13,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDnsA,IpAddress,read-create,,current,,The address of dns.
.1.3.6.1.4.1.11863.6.38.1.5.1.14,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDnsB,IpAddress,read-create,,current,,The address of dns.
.1.3.6.1.4.1.11863.6.38.1.5.1.15,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDnsC,IpAddress,read-create,,current,,The address of dns.
.1.3.6.1.4.1.11863.6.38.1.5.1.16,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDnsD,IpAddress,read-create,,current,,The address of dns.
.1.3.6.1.4.1.11863.6.38.1.5.1.17,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDnsE,IpAddress,read-create,,current,,The address of dns.
.1.3.6.1.4.1.11863.6.38.1.5.1.18,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDnsF,IpAddress,read-create,,current,,The address of dns.
.1.3.6.1.4.1.11863.6.38.1.5.1.19,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDnsG,IpAddress,read-create,,current,,The address of dns.
.1.3.6.1.4.1.11863.6.38.1.5.1.20,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDnsH,IpAddress,read-create,,current,,The address of dns.
.1.3.6.1.4.1.11863.6.38.1.5.1.21,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNBNServerA,IpAddress,read-create,,current,,The address of nebios server.
.1.3.6.1.4.1.11863.6.38.1.5.1.22,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNBNServerB,IpAddress,read-create,,current,,The address of nebios server.
.1.3.6.1.4.1.11863.6.38.1.5.1.23,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNBNServerC,IpAddress,read-create,,current,,The address of nebios server.
.1.3.6.1.4.1.11863.6.38.1.5.1.24,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNBNServerD,IpAddress,read-create,,current,,The address of nebios server.
.1.3.6.1.4.1.11863.6.38.1.5.1.25,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNBNServerE,IpAddress,read-create,,current,,The address of nebios server.
.1.3.6.1.4.1.11863.6.38.1.5.1.26,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNBNServerF,IpAddress,read-create,,current,,The address of nebios server.
.1.3.6.1.4.1.11863.6.38.1.5.1.27,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNBNServerG,IpAddress,read-create,,current,,The address of nebios server.
.1.3.6.1.4.1.11863.6.38.1.5.1.28,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNBNServerH,IpAddress,read-create,,current,,The address of nebios server.
.1.3.6.1.4.1.11863.6.38.1.5.1.29,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNetbiosNodeType,INTEGER,read-create,,current,none(0):broadcast(1):peer-to-peer(2):mixed(4):hybrid(8),The Netbios node type. 
.1.3.6.1.4.1.11863.6.38.1.5.1.30,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolNextServer,IpAddress,read-create,,current,,The address of next server.
.1.3.6.1.4.1.11863.6.38.1.5.1.31,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolDomainName,OCTET,read-create,,current,,The domain name of client.
.1.3.6.1.4.1.11863.6.38.1.5.1.32,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolBootfile,OCTET,read-create,,current,,The domain name of client.
.1.3.6.1.4.1.11863.6.38.1.5.1.33,TPLINK-DHCPSERVER-MIB::tpDhcpServerAddrPoolStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states:
.1.3.6.1.4.1.11863.6.38.1.6,TPLINK-DHCPSERVER-MIB::tpDhcpServerStaticBindTable,,not-accessible,,current,,A list of entries in DHCP server static bind table.
.1.3.6.1.4.1.11863.6.38.1.6.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerStaticBindEntry,,not-accessible,tpDhcpServerBindIpAddr,current,, A group of IP entries.
.1.3.6.1.4.1.11863.6.38.1.6.1.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerStaticAddrPoolName,OCTET,read-create,,current,,The entry name.
.1.3.6.1.4.1.11863.6.38.1.6.1.2,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindIpAddr,IpAddress,read-create,,current,,The static binding ip address.
.1.3.6.1.4.1.11863.6.38.1.6.1.3,TPLINK-DHCPSERVER-MIB::tpDhcpServerStaticClientId,OCTET,read-create,,current,,The identifier of the client.
.1.3.6.1.4.1.11863.6.38.1.6.1.4,TPLINK-DHCPSERVER-MIB::tpDhcpServerMacAddr,OCTET,read-create,,current,,The mac address of network.
.1.3.6.1.4.1.11863.6.38.1.6.1.5,TPLINK-DHCPSERVER-MIB::tpDhcpServerHardwareType,INTEGER,read-create,,current,ascii(-2):hex(-1):ethernet(1):ieee802(6),The hardware type. -2 stands for ascii clientid, -1 stands for hex clientid ETHERNET_BIND v
.1.3.6.1.4.1.11863.6.38.1.6.1.6,TPLINK-DHCPSERVER-MIB::tpDhcpServerStaticBindStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states:
.1.3.6.1.4.1.11863.6.38.1.7,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingTable,,not-accessible,,current,,A list of entries in DHCP server bindings.
.1.3.6.1.4.1.11863.6.38.1.7.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingEntry,,not-accessible,tpDhcpServerBindingIp,current,, A group of IP entries.
.1.3.6.1.4.1.11863.6.38.1.7.1.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingIp,IpAddress,read-only,,current,,The address of subnet mask.
.1.3.6.1.4.1.11863.6.38.1.7.1.2,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingClientId,OCTET,read-only,,current,,The identifier of the client.
.1.3.6.1.4.1.11863.6.38.1.7.1.3,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingMac,OCTET,read-only,,current,,The address of network.
.1.3.6.1.4.1.11863.6.38.1.7.1.4,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingType,INTEGER,read-only,,current,automatic(0):manual(1),The binding type.
.1.3.6.1.4.1.11863.6.38.1.7.1.5,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingRemainTime,OCTET,read-only,,current,,The rent time.
.1.3.6.1.4.1.11863.6.38.1.7.1.6,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states:
.1.3.6.1.4.1.11863.6.38.1.8,TPLINK-DHCPSERVER-MIB::tpDhcpServerBindingClear,INTEGER,read-write,,current,remain(0):clear(1),Clear the DHCP bindings.
.1.3.6.1.4.1.11863.6.38.1.9,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatistics,,,,,,
.1.3.6.1.4.1.11863.6.38.1.9.1,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsBootRequest,Counter64,read-only,,current,,Displays the Bootp Request packets received.
.1.3.6.1.4.1.11863.6.38.1.9.2,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsDiscover,Counter64,read-only,,current,,Displays the Discover packets received.
.1.3.6.1.4.1.11863.6.38.1.9.3,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsRequest,Counter64,read-only,,current,,Displays the Request packets received.
.1.3.6.1.4.1.11863.6.38.1.9.4,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsDecline,Counter64,read-only,,current,,Displays the Decline packets received.
.1.3.6.1.4.1.11863.6.38.1.9.5,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsRelease,Counter64,read-only,,current,,Displays the Release packets received.
.1.3.6.1.4.1.11863.6.38.1.9.6,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsInform,Counter64,read-only,,current,,Displays the Inform packets received.
.1.3.6.1.4.1.11863.6.38.1.9.7,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsBootReply,Counter64,read-only,,current,,Displays the Bootp reply packets sent.
.1.3.6.1.4.1.11863.6.38.1.9.8,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsOffer,Counter64,read-only,,current,,Displays the Offer packets sent.
.1.3.6.1.4.1.11863.6.38.1.9.9,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsAck,Counter64,read-only,,current,,Displays the Ack packets sent.
.1.3.6.1.4.1.11863.6.38.1.9.10,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsNak,Counter64,read-only,,current,,Displays the Nak packets sent.
.1.3.6.1.4.1.11863.6.38.1.9.11,TPLINK-DHCPSERVER-MIB::tpDhcpServerStatisticsClear,INTEGER,read-write,,current,remain(0):clear(1),Clear the packet statistics.
.1.3.6.1.4.1.11863.6.38.1.10,TPLINK-DHCPSERVER-MIB::tpDhcpServerPingPackets,INTEGER,read-write,,current,,The number of packets to be sent.
.1.3.6.1.4.1.11863.6.38.1.11,TPLINK-DHCPSERVER-MIB::tpDhcpServerPingTimeout,INTEGER,read-write,,current,,The time it takes to determine the specific IP not exist.
.1.3.6.1.4.1.11863.6.38.2,TPLINK-DHCPSERVER-MIB::tplinkDhcpServerNotifications,,,,,,
.1.3.6.1.4.1.11863.6.39,TPLINK-DHCPRELAY-MIB::tplinkDhcpRelayMIB,,,,,,Private MIB for DHCP Relay configuration.
.1.3.6.1.4.1.11863.6.39.1,TPLINK-DHCPRELAY-MIB::tplinkDhcpRelayMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.39.1.1,TPLINK-DHCPRELAY-MIB::dhcpRelayGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.39.1.1.1,TPLINK-DHCPRELAY-MIB::dhcpRelayEnableState,INTEGER,read-write,,current,disable(0):enable(1),Enable or disable the switch as a DHCP relay.
.1.3.6.1.4.1.11863.6.39.1.1.2,TPLINK-DHCPRELAY-MIB::dhcpRelayOption82Support,INTEGER,read-write,,current,disable(0):enable(1),Enable or disable DHCP relay option 82 support on the switch.
.1.3.6.1.4.1.11863.6.39.1.1.3,TPLINK-DHCPRELAY-MIB::dhcpRelayExistedOption82Field,INTEGER,read-write,,current,keep(0):replace(1):drop(2),Select how to handle existed DHCP relay option 82 field.
.1.3.6.1.4.1.11863.6.39.1.1.4,TPLINK-DHCPRELAY-MIB::dhcpRelayOption82Customization,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable DHCP relay option 82 customization on the switch.
.1.3.6.1.4.1.11863.6.39.1.1.5,TPLINK-DHCPRELAY-MIB::dhcpRelayOption82CircuitID,OCTET,read-write,,current,,Specify the Option 82 customized Circuit ID.(1-64 characters)
.1.3.6.1.4.1.11863.6.39.1.1.6,TPLINK-DHCPRELAY-MIB::dhcpRelayOption82RemoteID,OCTET,read-write,,current,,Specify the Option 82 customized Remote ID.(1-64 characters)
.1.3.6.1.4.1.11863.6.39.1.2,TPLINK-DHCPRELAY-MIB::dhcpRelayServerConfig,,,,,,
.1.3.6.1.4.1.11863.6.39.1.2.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerVlanInterfaceTable,,not-accessible,,current,,The list of DHCP server of VLAN interface.
.1.3.6.1.4.1.11863.6.39.1.2.1.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerVlanInterfaceEntry,,not-accessible,dhcpRelayServerVlanId:dhcpRelayServerVlanInterfaceIp,current,,DHCP server entries.
.1.3.6.1.4.1.11863.6.39.1.2.1.1.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerVlanId,INTEGER,read-only,,current,,VLAN interface ID.
.1.3.6.1.4.1.11863.6.39.1.2.1.1.2,TPLINK-DHCPRELAY-MIB::dhcpRelayServerVlanInterfaceIp,IpAddress,read-only,,current,,DHCP Server IP address.
.1.3.6.1.4.1.11863.6.39.1.2.1.1.3,TPLINK-DHCPRELAY-MIB::dhcpRelayServerVlanInterfaceStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.39.1.2.2,TPLINK-DHCPRELAY-MIB::dhcpRelayServerLoopbackInterfaceTable,,not-accessible,,current,,The list of DHCP server of loopback interface.
.1.3.6.1.4.1.11863.6.39.1.2.2.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerLoopbackInterfaceEntry,,not-accessible,dhcpRelayServerLoopbackId:dhcpRelayServerLoopbackInterfaceIp,current,,DHCP server entries.
.1.3.6.1.4.1.11863.6.39.1.2.2.1.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerLoopbackId,INTEGER,read-only,,current,,Loopback interface ID (1-2147483647).
.1.3.6.1.4.1.11863.6.39.1.2.2.1.2,TPLINK-DHCPRELAY-MIB::dhcpRelayServerLoopbackInterfaceIp,IpAddress,read-only,,current,,DHCP Server IP address.
.1.3.6.1.4.1.11863.6.39.1.2.2.1.3,TPLINK-DHCPRELAY-MIB::dhcpRelayServerLoopbackInterfaceStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.39.1.2.3,TPLINK-DHCPRELAY-MIB::dhcpRelayServerRoutedPortInterfaceTable,,not-accessible,,current,,The list of DHCP server of routed port interface.
.1.3.6.1.4.1.11863.6.39.1.2.3.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerRoutedPortInterfaceEntry,,not-accessible,ifIndex:dhcpRelayServerRoutedPortInterfaceIp,current,,DHCP server entries.
.1.3.6.1.4.1.11863.6.39.1.2.3.1.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerRoutedPortPortId,OCTET,read-only,,current,,Displays the port ID.
.1.3.6.1.4.1.11863.6.39.1.2.3.1.2,TPLINK-DHCPRELAY-MIB::dhcpRelayServerRoutedPortInterfaceIp,IpAddress,read-only,,current,,DHCP Server IP address.
.1.3.6.1.4.1.11863.6.39.1.2.3.1.3,TPLINK-DHCPRELAY-MIB::dhcpRelayServerRoutedPortInterfaceStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.39.1.2.4,TPLINK-DHCPRELAY-MIB::dhcpRelayServerPortChannelInterfaceTable,,not-accessible,,current,,The list of DHCP server of port channel interface.
.1.3.6.1.4.1.11863.6.39.1.2.4.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerPortChannelInterfaceEntry,,not-accessible,ifIndex:dhcpRelayServerPortChannelInterfaceIp,current,,DHCP server entries.
.1.3.6.1.4.1.11863.6.39.1.2.4.1.1,TPLINK-DHCPRELAY-MIB::dhcpRelayServerPortChannelPortId,INTEGER,read-only,,current,,Port channel interface ID.
.1.3.6.1.4.1.11863.6.39.1.2.4.1.2,TPLINK-DHCPRELAY-MIB::dhcpRelayServerPortChannelInterfaceIp,IpAddress,read-only,,current,,DHCP Server IP address.
.1.3.6.1.4.1.11863.6.39.1.2.4.1.3,TPLINK-DHCPRELAY-MIB::dhcpRelayServerPortChannelInterfaceStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.39.2,TPLINK-DHCPRELAY-MIB::tplinkDhcpRelayNotifications,,,,,,
.1.3.6.1.4.1.11863.6.40,TPLINK-RIP-MIB::tplinkRipMIB,,,,,,Private MIB for RIP configuration.
.1.3.6.1.4.1.11863.6.40.1,TPLINK-RIP-MIB::tplinkRipMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.40.1.1,TPLINK-RIP-MIB::tpRipBasicConfig,,,,,,
.1.3.6.1.4.1.11863.6.40.1.1.1,TPLINK-RIP-MIB::tpRipProtocolCtrl,INTEGER,read-write,,current,disable(0):enable(1),Enable or disable the RIP function on the switch.
.1.3.6.1.4.1.11863.6.40.1.1.2,TPLINK-RIP-MIB::tpRipProtocolVersion,INTEGER,read-write,,current,default(0):ripv1(1):ripv2(2),Choose the global RIP version.
.1.3.6.1.4.1.11863.6.40.1.1.3,TPLINK-RIP-MIB::tpRipDistance,INTEGER,read-write,,current,,Set the RIP router distance.
.1.3.6.1.4.1.11863.6.40.1.1.4,TPLINK-RIP-MIB::tpRipAutoSumm,INTEGER,read-write,,current,disable(0):enable(1),If you select enable groups of adjacent routes will be summarized into single entries.
.1.3.6.1.4.1.11863.6.40.1.1.5,TPLINK-RIP-MIB::tpRipDefaultMetric,INTEGER,read-write,,current,,Set the default metric for redistributed routes.
.1.3.6.1.4.1.11863.6.40.1.1.6,TPLINK-RIP-MIB::tpRipRedistriStatic,INTEGER,read-write,,current,disable(0):enable(1),Choose to distribute Static router entries to RIP,the default is disable.
.1.3.6.1.4.1.11863.6.40.1.1.7,TPLINK-RIP-MIB::tpRipRedistriOspf,INTEGER,read-write,,current,disable(0):enable(1),Choose to distribute OSPF router entries to RIP,the default is disable..
.1.3.6.1.4.1.11863.6.40.1.1.8,TPLINK-RIP-MIB::tpRipRedistStaticMetric,INTEGER,read-write,,current,,Set the metric for redistributed static routes.
.1.3.6.1.4.1.11863.6.40.1.1.9,TPLINK-RIP-MIB::tpRipRedistOspfMetric,INTEGER,read-write,,current,,Set the metric for redistributed OSPF routes.
.1.3.6.1.4.1.11863.6.40.1.1.10,TPLINK-RIP-MIB::tpRipUpdateTimer,INTEGER,read-write,,current,,The timer interval to generate a complete response to every neighboring gateway.
.1.3.6.1.4.1.11863.6.40.1.1.11,TPLINK-RIP-MIB::tpRipTimeOutTimer,INTEGER,read-write,,current,,Upon expiration of the timeout, the route is no longer valid and setted to unreachable. 
.1.3.6.1.4.1.11863.6.40.1.1.12,TPLINK-RIP-MIB::tpRipGarbageTimer,INTEGER,read-write,,current,,Upon expiration of the garbage-collection timer, the route is finally removed from the tables.
.1.3.6.1.4.1.11863.6.40.1.2,TPLINK-RIP-MIB::tpRipNetworkConfig,,,,,,
.1.3.6.1.4.1.11863.6.40.1.2.1,TPLINK-RIP-MIB::tpRipNetworkTable,,not-accessible,,current,,The list of rip network.
.1.3.6.1.4.1.11863.6.40.1.2.1.1,TPLINK-RIP-MIB::tpRipNetworkEntry,,not-accessible,tpRipNetworkAddress,current,,RIP network entries.
.1.3.6.1.4.1.11863.6.40.1.2.1.1.1,TPLINK-RIP-MIB::tpRipNetworkAddress,IpAddress,read-create,,current,,RIP network IP address.
.1.3.6.1.4.1.11863.6.40.1.2.1.1.2,TPLINK-RIP-MIB::tpRipNetworkStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.40.1.3,TPLINK-RIP-MIB::tpRipInterfaceConfig,,,,,,
.1.3.6.1.4.1.11863.6.40.1.3.1,TPLINK-RIP-MIB::tpRipInterfaceTable,,not-accessible,,current,,The list of rip interfaces.
.1.3.6.1.4.1.11863.6.40.1.3.1.1,TPLINK-RIP-MIB::tpRipInterfaceEntry,,not-accessible,tpRipInterfaceID,current,,Config the RIP parameters of the interface.
.1.3.6.1.4.1.11863.6.40.1.3.1.1.1,TPLINK-RIP-MIB::tpRipInterfaceID,OCTET,read-only,,current,,The interface IP address and subnet mask.
.1.3.6.1.4.1.11863.6.40.1.3.1.1.2,TPLINK-RIP-MIB::tpRipInterfaceStatus,OCTET,read-only,,current,,The interface RIP status(up or down).
.1.3.6.1.4.1.11863.6.40.1.3.1.1.3,TPLINK-RIP-MIB::tpRipInterfaceSendVersion,INTEGER,read-write,,current,ripv1(1):ripv2(2):rip-1c(3),Select the version of RIP control packets sended from the interface.
.1.3.6.1.4.1.11863.6.40.1.3.1.1.4,TPLINK-RIP-MIB::tpRipInterfaceRecvVersion,INTEGER,read-write,,current,ripv1(1):ripv2(2):both(3),Select the version of RIP control packets received from the interface.
.1.3.6.1.4.1.11863.6.40.1.3.1.1.5,TPLINK-RIP-MIB::tpRipInterfaceRIPv2Broad,INTEGER,read-write,,current,disable(0):enable(1),Send RIP version 2 formatted packets via broadcast.
.1.3.6.1.4.1.11863.6.40.1.3.1.1.6,TPLINK-RIP-MIB::tpRipInterfaceAuthMode,INTEGER,read-write,,current,none(1):simple(2):md5(3),Select an authentication type.
.1.3.6.1.4.1.11863.6.40.1.3.1.1.7,TPLINK-RIP-MIB::tpRipInterfaceKeyID,INTEGER,read-write,,current,,Enter the RIP Authentication Key ID for the specified interface.
.1.3.6.1.4.1.11863.6.40.1.3.1.1.8,TPLINK-RIP-MIB::tpRipInterfaceKey,OCTET,read-write,,current,,Enter the RIP Authentication Key for the specified interface. 
.1.3.6.1.4.1.11863.6.40.1.3.1.1.9,TPLINK-RIP-MIB::tpRipInterfaceSplitHorizon,INTEGER,read-write,,current,disable(0):enable(1),Enable or disable the split horizon.
.1.3.6.1.4.1.11863.6.40.1.3.1.1.10,TPLINK-RIP-MIB::tpRipInterfacePoisonReverse,INTEGER,read-write,,current,disable(0):enable(1),Enable or disable the poison reverse.
.1.3.6.1.4.1.11863.6.40.1.4,TPLINK-RIP-MIB::tpRipRouteItems,,,,,,
.1.3.6.1.4.1.11863.6.40.1.4.1,TPLINK-RIP-MIB::tpRipRouteTable,,not-accessible,,current,,Display the route entries generated by RIP protocol.
.1.3.6.1.4.1.11863.6.40.1.4.1.1,TPLINK-RIP-MIB::tpRipRouteEntry,,not-accessible,tpRipIpAddressMask,current,,RIP route entries.
.1.3.6.1.4.1.11863.6.40.1.4.1.1.1,TPLINK-RIP-MIB::tpRipIpAddressMask,OCTET,read-only,,current,,The destination IP address and subnet mask.
.1.3.6.1.4.1.11863.6.40.1.4.1.1.2,TPLINK-RIP-MIB::tpRipGateway,IpAddress,read-only,,current,,The gateway interface to send the data packet.
.1.3.6.1.4.1.11863.6.40.1.4.1.1.3,TPLINK-RIP-MIB::tpRipMetric,INTEGER,read-only,,current,,The metric to reach the destination IP address.
.1.3.6.1.4.1.11863.6.40.1.4.1.1.4,TPLINK-RIP-MIB::tpRipInterfaceName,OCTET,read-only,,current,,The gateway interface name.
.1.3.6.1.4.1.11863.6.40.1.4.1.1.5,TPLINK-RIP-MIB::tpRipTimers,INTEGER,read-only,,current,,The time of the route entry.
.1.3.6.1.4.1.11863.6.40.2,TPLINK-RIP-MIB::tplinkRipNotifications,,,,,,
.1.3.6.1.4.1.11863.6.41,TPLINK-USERSECURITY-MIB::tplinkUserSecurity,,,,,,Implementation of the user security is mandatory for the
.1.3.6.1.4.1.11863.6.41.1,TPLINK-USERSECURITY-MIB::tplinkUserSecurityMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.41.1.1,TPLINK-USERSECURITY-MIB::userSecurityUserAuth,,,,,,
.1.3.6.1.4.1.11863.6.41.1.1.1,TPLINK-USERSECURITY-MIB::userSecurityUserAuthType,INTEGER,read-only,,current,disable(0):ip(1):mac(2):port(3),disable(0), 
.1.3.6.1.4.1.11863.6.41.1.1.2,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPort,,,,,,
.1.3.6.1.4.1.11863.6.41.1.1.2.1,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1.enable
.1.3.6.1.4.1.11863.6.41.1.1.2.2,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortAccessSnmp,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- SNMP frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.2.3,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortAccessTelnet,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- Telnet frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.2.4,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortAccessSsh,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- SSH frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.2.5,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortAccessHttp,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- HTTP frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.2.6,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortAccessHttps,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- HTTPS frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.2.7,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortAccessPing,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- Ping request frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.2.8,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortTable,,not-accessible,,current,,A list of port.
.1.3.6.1.4.1.11863.6.41.1.1.2.8.1,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortEntry,,not-accessible,ifIndex,current,,An entry contains of the port for user auth .
.1.3.6.1.4.1.11863.6.41.1.1.2.8.1.2,TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortConf,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1.enable
.1.3.6.1.4.1.11863.6.41.1.1.3,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIp,,,,,,
.1.3.6.1.4.1.11863.6.41.1.1.3.1,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1.enable
.1.3.6.1.4.1.11863.6.41.1.1.3.2,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpTable,,not-accessible,,current,,A list of IP.
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpEntry,,not-accessible,userSecurityUserAuthIndex,current,,An entry contains of the IP for user authentication .
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.1,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpIndex,INTEGER,read-only,,current,,IP entry ID
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.2,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessSnmp,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- SNMP frame sent to the switch will be accepted by default 1.enable -- SNMP frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.3,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessTelnet,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- Telnet frame sent to the switch will be accepted by default 1.enable -- Telnet frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.4,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessSsh,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- SSH frame sent to the switch will be accepted by default 1.enable -- SSH frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.5,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessHttp,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- HTTP frame sent to the switch will be accepted by default 1.enable -- HTTP frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.6,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessHttps,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- HTTPS frame sent to the switch will be accepted by default 1.enable -- HTTPS frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.7,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessPing,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- Ping request frame sent to the switch will be accepted by default 1.enable -- Ping request frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.8,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAddress,IpAddress,read-write,,current,,the auth ip address.for example: 192.168.0.1
.1.3.6.1.4.1.11863.6.41.1.1.3.2.1.9,TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpMask,IpAddress,read-write,,current,,the subnet mask of the auth ip address.for example: 255.255.255.0
.1.3.6.1.4.1.11863.6.41.1.1.4,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMac,,,,,,
.1.3.6.1.4.1.11863.6.41.1.1.4.1,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1.enable
.1.3.6.1.4.1.11863.6.41.1.1.4.2,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacAccessSnmp,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- SNMP frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.4.3,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacAccessTelnet,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- Telnet frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.4.4,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacAccessSsh,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- SSH frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.4.5,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacAccessHttp,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- HTTP frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.4.6,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacAccessHttps,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- HTTPS frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.4.7,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacAccessPing,INTEGER,read-write,,current,disable(0):enable(1),0. disable -- Ping request frame sent to the switch will be accepted by default
.1.3.6.1.4.1.11863.6.41.1.1.4.8,TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacAddress,OCTET,read-write,,current,,the auth mac
.1.3.6.1.4.1.11863.6.41.2,TPLINK-USERSECURITY-MIB::tplinkUserSecurityMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.42,TPLINK-SSL-MIB::tplinkSslMIB,,,,,,Private MIB for SSL configuration.
.1.3.6.1.4.1.11863.6.42.1,TPLINK-SSL-MIB::tplinkSslMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.42.1.1,TPLINK-SSL-MIB::tpHttpsEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.42.1.2,TPLINK-SSL-MIB::tpSslv3Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.42.1.3,TPLINK-SSL-MIB::tpTlsv1Enable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.42.1.4,TPLINK-SSL-MIB::tpRc4Md5,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.42.1.5,TPLINK-SSL-MIB::tpRc4Sha,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.42.1.6,TPLINK-SSL-MIB::tpDesCbcSha,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.42.1.7,TPLINK-SSL-MIB::tp3DesEdeCbcSha,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.42.1.8,TPLINK-SSL-MIB::tpHttpsSessionTimeOut,INTEGER,read-write,,current,,HTTPS session timeout in minutes.
.1.3.6.1.4.1.11863.6.42.1.9,TPLINK-SSL-MIB::tpHttpsUserLimitEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.42.1.10,TPLINK-SSL-MIB::tpHttpsUserLimitMaxAdminNum,INTEGER,read-write,,current,,The max num of admin users. You should enable HTTPS user number limiting before setting this object.
.1.3.6.1.4.1.11863.6.42.1.11,TPLINK-SSL-MIB::tpHttpsUserLimitMaxGuestNum,INTEGER,read-write,,current,,The max num of guest users. You should enable HTTP user number limiting before setting this object.
.1.3.6.1.4.1.11863.6.42.2,TPLINK-SSL-MIB::tplinkSslNotifications,,,,,,
.1.3.6.1.4.1.11863.6.43,TPLINK-MLDSNOOPING-MIB::tplinkMldSnoopingMIB,,,,,,Private MIB for mldSnooping manage.
.1.3.6.1.4.1.11863.6.43.1,TPLINK-MLDSNOOPING-MIB::tplinkMldSnoopingMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.43.1.1,TPLINK-MLDSNOOPING-MIB::tpMldSnooping,,,,,,
.1.3.6.1.4.1.11863.6.43.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldSnoopingGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.43.1.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldSnoopingEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable MLD Snooping function globally on the Switch. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.43.1.1.1.2,TPLINK-MLDSNOOPING-MIB::tpMldUnknownMulticastPacket,INTEGER,read-write,,current,forward(0):discard(1),Select the operation for the switch to process unknown multicast. 0. forward  1. discard
.1.3.6.1.4.1.11863.6.43.1.1.1.3,TPLINK-MLDSNOOPING-MIB::tpMldUnknownReportSuppression,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable MLD Snooping report suppression function globally on the Switch. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.43.1.1.1.4,TPLINK-MLDSNOOPING-MIB::tpMldGlobalRouterTime,INTEGER,read-create,,current,,Specify the aging time of the router port. Within this time,  if the switch don't receive MLD query message from the router port,  it will consider this port is not a router port any more,60-600 second.
.1.3.6.1.4.1.11863.6.43.1.1.1.5,TPLINK-MLDSNOOPING-MIB::tpMldGlobalMemberTime,INTEGER,read-create,,current,,Specify the aging time of the member port. Within this time,  if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,60-600 second.
.1.3.6.1.4.1.11863.6.43.1.1.1.6,TPLINK-MLDSNOOPING-MIB::tpMldlastListenerQueryInterval,INTEGER,read-create,,current,,Enter the Last Listener Query interval time. When the multicast group has no more member ports, it will send the Specific Query Message with this interval time to check whether there is another member. The interval is ranging from 1 to 5 seconds.
.1.3.6.1.4.1.11863.6.43.1.1.1.7,TPLINK-MLDSNOOPING-MIB::tpMldlastListenerQueryCount,INTEGER,read-create,,current,,Enter the Last Listener Query numbers. When the multicast group has no more member ports, it will send this numbers of Specific Query Message to check whether there is another member. It is ranging from 1 to 5.
.1.3.6.1.4.1.11863.6.43.1.1.2,TPLINK-MLDSNOOPING-MIB::tpMldPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.43.1.1.2.1,TPLINK-MLDSNOOPING-MIB::tpMldPortTable,,not-accessible,,current,,MLD Snooping (Internet Group Management Protocol Snooping)  is a multicast control mechanism running on Layer 2 switch.  It can effectively prevent multicast groups being broadcasted  in the network.
.1.3.6.1.4.1.11863.6.43.1.1.2.1.1,TPLINK-MLDSNOOPING-MIB::tpMldPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of port configure.
.1.3.6.1.4.1.11863.6.43.1.1.2.1.1.2,TPLINK-MLDSNOOPING-MIB::tpMldSnoopingPortEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable MLD Snooping for the desired port. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.43.1.1.2.1.1.3,TPLINK-MLDSNOOPING-MIB::tpMldFastLeavePortEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable Fast Leave feature for the desired port.  If Fast Leave is enabled for a port, the Switch will immediately  remove this port from the multicast group upon receiving MLD  leave messages. 0. Disable 1. Enable
.1.3.6.1.4.1.11863.6.43.1.1.2.1.1.4,TPLINK-MLDSNOOPING-MIB::tpMldPortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.43.1.1.3,TPLINK-MLDSNOOPING-MIB::tpMldVlanConfig,,,,,,
.1.3.6.1.4.1.11863.6.43.1.1.3.1,TPLINK-MLDSNOOPING-MIB::tpMldVlanTable,,not-accessible,,current,,Multicast groups established by MLD Snooping are based on VLANs.  You can configure different MLD parameters for different VLANs.
.1.3.6.1.4.1.11863.6.43.1.1.3.1.1,TPLINK-MLDSNOOPING-MIB::tpMldVlanEntry,,not-accessible,tpMldVlanId,current,,An entry contains of the information of mldsnooping.
.1.3.6.1.4.1.11863.6.43.1.1.3.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldVlanId,INTEGER,read-only,,current,,Enter the VLAN ID to enable MLD Snooping for the desired VLAN,1-4094.
.1.3.6.1.4.1.11863.6.43.1.1.3.1.1.2,TPLINK-MLDSNOOPING-MIB::tpMldRouterTime,INTEGER,read-create,,current,,Specify the aging time of the router port. Within this time,  if the switch don't receive MLD query message from the router port,  it will consider this port is not a router port any more,0,60-600 second.
.1.3.6.1.4.1.11863.6.43.1.1.3.1.1.3,TPLINK-MLDSNOOPING-MIB::tpMldMemberTime,INTEGER,read-create,,current,,Specify the aging time of the member port. Within this time,  if the switch don't receive MLD report message from the member port, it will consider this port is not a member port any more,0,60-600 second.
.1.3.6.1.4.1.11863.6.43.1.1.3.1.1.4,TPLINK-MLDSNOOPING-MIB::tpMldRouterPort,OCTET,read-create,,current,,Config the static router ports which are mainly used in the network with  stable topology.
.1.3.6.1.4.1.11863.6.43.1.1.3.1.1.5,TPLINK-MLDSNOOPING-MIB::tpMldForbiddenRouterPort,OCTET,read-create,,current,,Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports.
.1.3.6.1.4.1.11863.6.43.1.1.3.1.1.6,TPLINK-MLDSNOOPING-MIB::tpMldVlanStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states: these values may be read or written active(1), notInService(2), the following value is a state: this value may be read, but not written notReady(3), the following three values are actions: these values may be written, but are never read createAndGo(4), createAndWait(5), destroy(6)
.1.3.6.1.4.1.11863.6.43.1.1.4,TPLINK-MLDSNOOPING-MIB::tpMldMultiVlanConfig,,,,,,
.1.3.6.1.4.1.11863.6.43.1.1.4.1,TPLINK-MLDSNOOPING-MIB::tpMldMultiVlanId,INTEGER,read-write,,current,,Enter the VLAN ID of the multicast VLAN,2-4094.If enter 0, multicast VLAN is disabled.
.1.3.6.1.4.1.11863.6.43.1.1.4.2,TPLINK-MLDSNOOPING-MIB::tpMldMultitRouterTime,INTEGER,read-write,,current,,Specify the aging time of the router port. Within this time,  if the switch don't receive MLD query message from the router port, it will consider this port is not a router port any more,0,60-600 second.
.1.3.6.1.4.1.11863.6.43.1.1.4.3,TPLINK-MLDSNOOPING-MIB::tpMldMultiMemberTime,INTEGER,read-write,,current,,Specify the aging time of the member port. Within this time,  if the switch don't receive MLD report message from the member port,  it will consider this port is not a member port any more,0,60-600 second.
.1.3.6.1.4.1.11863.6.43.1.1.4.4,TPLINK-MLDSNOOPING-MIB::tpMldMultiRouterPort,OCTET,read-write,,current,,Config the static router ports which are mainly used in the network with  stable topology.
.1.3.6.1.4.1.11863.6.43.1.1.4.5,TPLINK-MLDSNOOPING-MIB::tpMldMultiForbiddenRouterPort,OCTET,read-write,,current,,Config the forbidden router ports which are mainly used to forbidden specified ports to become router ports.
.1.3.6.1.4.1.11863.6.43.1.1.4.6,TPLINK-MLDSNOOPING-MIB::tpMldMultiReplaceSrcIp,OCTET,read-create,,current,,config the source ip which will replace the source ip of MLD report in  multicast vlan.
.1.3.6.1.4.1.11863.6.43.1.1.5,TPLINK-MLDSNOOPING-MIB::tpMldQuerierConfig,,,,,,
.1.3.6.1.4.1.11863.6.43.1.1.5.1,TPLINK-MLDSNOOPING-MIB::mldQuerierTable,,not-accessible,,current,,MLD Snooping Querier is based on VLAN. You can configure  different MLD Snooping Querier parameters for different VLANs.
.1.3.6.1.4.1.11863.6.43.1.1.5.1.1,TPLINK-MLDSNOOPING-MIB::mldQuerierEntry,,not-accessible,mldQuerierVlanId,current,,An entry contains of the information of MLD Snooping Querier.
.1.3.6.1.4.1.11863.6.43.1.1.5.1.1.1,TPLINK-MLDSNOOPING-MIB::mldQuerierVlanId,INTEGER,read-only,,current,,Enter the VLAN ID to enable MLD Snooping Querier for the desired VLAN, ranging from 1 to 4094.
.1.3.6.1.4.1.11863.6.43.1.1.5.1.1.2,TPLINK-MLDSNOOPING-MIB::mldQueryInterval,INTEGER,read-create,,current,,Enter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds.
.1.3.6.1.4.1.11863.6.43.1.1.5.1.1.3,TPLINK-MLDSNOOPING-MIB::mldMaxResponseTime,INTEGER,read-create,,current,,Enter the value of Maximum Response Time field of the Query message. The host is expected to response to an MLD general query within this time. The time is ranging from 1 to 25 seconds.
.1.3.6.1.4.1.11863.6.43.1.1.5.1.1.4,TPLINK-MLDSNOOPING-MIB::mldGeneralQuerySrcIp,OCTET,read-create,,current,,Enter the General Query Message source IP address.
.1.3.6.1.4.1.11863.6.43.1.1.5.1.1.5,TPLINK-MLDSNOOPING-MIB::mldQuerierStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),not being used. destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.43.1.2,TPLINK-MLDSNOOPING-MIB::tpMldFilter,,,,,,
.1.3.6.1.4.1.11863.6.43.1.2.1,TPLINK-MLDSNOOPING-MIB::tpMldPortFilterConfig,,,,,,
.1.3.6.1.4.1.11863.6.43.1.2.1.1,TPLINK-MLDSNOOPING-MIB::tpMldFilterPortTable,,not-accessible,,current,,When the switch receives MLD report message, it examines  the multicast filtering IP ID configured on the access port  to determine if the port can join the multicast group.  If the multicast IP is not filtered, the switch will add  the port to the forward port list of the multicast group.  Otherwise, the switch will drop the MLD report message.  In that way, you can control the multicast groups that users  can access.
.1.3.6.1.4.1.11863.6.43.1.2.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldFilterPortEntry,,not-accessible,ifIndex,current,,An entry contains of the information of a port param.
.1.3.6.1.4.1.11863.6.43.1.2.1.1.1.2,TPLINK-MLDSNOOPING-MIB::tpMldFilterMaxGroup,INTEGER,read-write,,current,,Specify the maximum number of multicast groups to prevent some  ports taking up too much bandwidth.
.1.3.6.1.4.1.11863.6.43.1.2.1.1.1.3,TPLINK-MLDSNOOPING-MIB::tpMldFilterMaxGroupAction,INTEGER,read-write,,current,drop(0):replace(1),The policy should be taken when the number of multicast group  0.Drop: drop the successive report packet, and this port can  1.Replace: when the port joins another new multicast group,it 
.1.3.6.1.4.1.11863.6.43.1.2.1.1.1.4,TPLINK-MLDSNOOPING-MIB::tpMldFilterBindAddrId,OCTET,read-write,,current,,Enter the profile ID the port will be bound to. Only one profile
.1.3.6.1.4.1.11863.6.43.1.2.1.1.1.5,TPLINK-MLDSNOOPING-MIB::tpMldFilterPortLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.43.1.3,TPLINK-MLDSNOOPING-MIB::tpMldPacketStatistic,,,,,,
.1.3.6.1.4.1.11863.6.43.1.3.1,TPLINK-MLDSNOOPING-MIB::tpMldPktStat,,,,,,
.1.3.6.1.4.1.11863.6.43.1.3.1.1,TPLINK-MLDSNOOPING-MIB::tpMldPktStatTable,,not-accessible,,current,,A list of multicast statistic Table.
.1.3.6.1.4.1.11863.6.43.1.3.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldPktStatEntry,,not-accessible,ifIndex,current,,An entry contains of multicast packet statistics over each port.
.1.3.6.1.4.1.11863.6.43.1.3.1.1.1.2,TPLINK-MLDSNOOPING-MIB::tpMldQueryPktStat,INTEGER,read-only,,current,,Displays the number of query packets the port received.
.1.3.6.1.4.1.11863.6.43.1.3.1.1.1.3,TPLINK-MLDSNOOPING-MIB::tpMldReportV1PktStat,INTEGER,read-only,,current,,Displays the number of MLDv1 report packets the port received.
.1.3.6.1.4.1.11863.6.43.1.3.1.1.1.4,TPLINK-MLDSNOOPING-MIB::tpMldReportV2PktStat,INTEGER,read-only,,current,,Displays the number of MLDv2 report packets the port received.
.1.3.6.1.4.1.11863.6.43.1.3.1.1.1.6,TPLINK-MLDSNOOPING-MIB::tpMldDonePktStat,INTEGER,read-only,,current,,Displays the number of done packets the port received.
.1.3.6.1.4.1.11863.6.43.1.3.1.1.1.7,TPLINK-MLDSNOOPING-MIB::tpMldErrorPktStat,INTEGER,read-only,,current,,Displays the number of error packets the port received.
.1.3.6.1.4.1.11863.6.43.1.3.1.2,TPLINK-MLDSNOOPING-MIB::tpIpMldPktStatClear,INTEGER,read-write,,current,commit(1),mld packet statistic clear.
.1.3.6.1.4.1.11863.6.43.1.4,TPLINK-MLDSNOOPING-MIB::tpMldMultigroup,,,,,,
.1.3.6.1.4.1.11863.6.43.1.4.1,TPLINK-MLDSNOOPING-MIB::tpMldMulticastGroups,,,,,,
.1.3.6.1.4.1.11863.6.43.1.4.1.1,TPLINK-MLDSNOOPING-MIB::tpMldMulticastGroupTable,,not-accessible,,current,,A list of multicast groups Table.
.1.3.6.1.4.1.11863.6.43.1.4.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldMulticastGroupEntry,,not-accessible,tpMldMulticastIP:tpMldVlanID,current,,An entry contains of multicast packet statistics over each port.
.1.3.6.1.4.1.11863.6.43.1.4.1.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldMulticastIP,OCTET,read-only,,current,,Displays the multicast IP address.
.1.3.6.1.4.1.11863.6.43.1.4.1.1.1.2,TPLINK-MLDSNOOPING-MIB::tpMldVlanID,INTEGER,read-only,,current,,Displays the VLAN ID.
.1.3.6.1.4.1.11863.6.43.1.4.1.1.1.3,TPLINK-MLDSNOOPING-MIB::tpMldForwardPorts,OCTET,read-only,,current,,Displays the forward ports of multicast group.
.1.3.6.1.4.1.11863.6.43.1.4.1.1.1.4,TPLINK-MLDSNOOPING-MIB::tpMldGrouptype,INTEGER,read-only,,current,static(0):dynamic(1),Displays the type of multicast group.
.1.3.6.1.4.1.11863.6.43.1.5,TPLINK-MLDSNOOPING-MIB::tpMldStaticMultigroup,,,,,,
.1.3.6.1.4.1.11863.6.43.1.5.1,TPLINK-MLDSNOOPING-MIB::tpMldMulticastStaticGroups,,,,,,
.1.3.6.1.4.1.11863.6.43.1.5.1.1,TPLINK-MLDSNOOPING-MIB::tpMldMulticastStaticGroupTable,,not-accessible,,current,,A list of multicast groups Table.
.1.3.6.1.4.1.11863.6.43.1.5.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldMulticastStaticGroupEntry,,not-accessible,tpMldStaticMulticastIP:tpMldStaticVlanID,current,,An entry contains of multicast packet statistics over each port.
.1.3.6.1.4.1.11863.6.43.1.5.1.1.1.1,TPLINK-MLDSNOOPING-MIB::tpMldStaticMulticastIP,OCTET,read-create,,current,,The multicast IP address.
.1.3.6.1.4.1.11863.6.43.1.5.1.1.1.2,TPLINK-MLDSNOOPING-MIB::tpMldStaticVlanID,INTEGER,read-create,,current,,The VLAN ID.
.1.3.6.1.4.1.11863.6.43.1.5.1.1.1.3,TPLINK-MLDSNOOPING-MIB::tpMldStaticForwardPorts,OCTET,read-create,,current,,The forward ports of multicast group.
.1.3.6.1.4.1.11863.6.43.1.5.1.1.1.4,TPLINK-MLDSNOOPING-MIB::tpMldStaticGroupStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow:  active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.43.2,TPLINK-MLDSNOOPING-MIB::tplinkMldSnoopingNotifications,,,,,,
.1.3.6.1.4.1.11863.6.48,TPLINK-DHCPFILTERING-MIB::tplinkDhcpFilteringMIB,,,,,,Private MIB for DHCP Filtering configuration.
.1.3.6.1.4.1.11863.6.48.1,TPLINK-DHCPFILTERING-MIB::tplinkDhcpFilteringMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.48.1.1,TPLINK-DHCPFILTERING-MIB::dhcpFilteringGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.48.1.1.1,TPLINK-DHCPFILTERING-MIB::dhcpFilteringEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.48.1.1.2,TPLINK-DHCPFILTERING-MIB::dhcpFilteringVlanConfigTable,,not-accessible,,current,,Here you can view and modify the DHCP Filtering VLAN config table.
.1.3.6.1.4.1.11863.6.48.1.1.2.1,TPLINK-DHCPFILTERING-MIB::dhcpFilteringVlanConfigEntry,,not-accessible,dhcpFilteringVlanId,current,,An entry contains of the DHCP Filtering function enable status information of a VLAN.
.1.3.6.1.4.1.11863.6.48.1.1.2.1.1,TPLINK-DHCPFILTERING-MIB::dhcpFilteringVlanId,INTEGER,read-create,,current,,Enter the ID number of VLAN,1-4094.
.1.3.6.1.4.1.11863.6.48.1.1.2.1.2,TPLINK-DHCPFILTERING-MIB::dhcpFilteringVlanStatus,INTEGER,read-create,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.48.1.3,TPLINK-DHCPFILTERING-MIB::dhcpFilteringPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.48.1.3.1,TPLINK-DHCPFILTERING-MIB::dhcpFilteringPortConfigTable,,not-accessible,,current,,A list of DHCP Filtering port config entries. Here you can configure the port parameters for the DHCP Filtering.
.1.3.6.1.4.1.11863.6.48.1.3.1.1,TPLINK-DHCPFILTERING-MIB::dhcpFilteringPortConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of DHCP Filtering port config.
.1.3.6.1.4.1.11863.6.48.1.3.1.1.1,TPLINK-DHCPFILTERING-MIB::dhcpFilteringPort,OCTET,read-only,,current,,Display port number
.1.3.6.1.4.1.11863.6.48.1.3.1.1.2,TPLINK-DHCPFILTERING-MIB::dhcpFilteringPortConfigTrustedPort,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1. enable Select Enable/Disable the port to be a Trusted Port.  Only the Trusted Port can receive the DHCP packets from DHCP servers.
.1.3.6.1.4.1.11863.6.48.1.3.1.1.3,TPLINK-DHCPFILTERING-MIB::dhcpFilteringPortConfigPortLag,OCTET,read-only,,current,,The LAG to which the port belongs to.
.1.3.6.1.4.1.11863.6.48.2,TPLINK-DHCPFILTERING-MIB::tplinkDhcpFilteringNotifications,,,,,,
.1.3.6.1.4.1.11863.6.50,TPLINK-IPV6ADDR-MIB::tplinkIpv6AddrMIB,,,,,,Private MIB for IPv6 address configuration.
.1.3.6.1.4.1.11863.6.50.1,TPLINK-IPV6ADDR-MIB::tplinkIpv6AddrMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.50.1.1,TPLINK-IPV6ADDR-MIB::ipv6ParaConfigAddrTable,,not-accessible,,current,,The table of address information is relevant to the switch's IPv6 addresses.
.1.3.6.1.4.1.11863.6.50.1.1.1,TPLINK-IPV6ADDR-MIB::ipv6ParaConfigAddrEntry,,not-accessible,ipv6ParaConfigIfIndex:ipv6ParaConfigAddrType:ipv6ParaConfigSourceType:ipv6ParaConfigAddress,current,,Define the IPv6 address information.
.1.3.6.1.4.1.11863.6.50.1.1.1.2,TPLINK-IPV6ADDR-MIB::ipv6ParaConfigIfIndex,INTEGER,read-only,,current,,The IfIndex of the interface
.1.3.6.1.4.1.11863.6.50.1.1.1.3,TPLINK-IPV6ADDR-MIB::ipv6ParaConfigAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of the switch. The value must be ipv6.
.1.3.6.1.4.1.11863.6.50.1.1.1.4,TPLINK-IPV6ADDR-MIB::ipv6ParaConfigAddress,OCTET,read-only,,current,,The IPv6 address of the switch.
.1.3.6.1.4.1.11863.6.50.1.1.1.5,TPLINK-IPV6ADDR-MIB::ipv6ParaConfigPrefixLength,INTEGER,read-create,,current,,The length of the prefix (in bits) associated with the IPv6 address of the switch.
.1.3.6.1.4.1.11863.6.50.1.1.1.6,TPLINK-IPV6ADDR-MIB::ipv6ParaConfigSourceType,INTEGER,read-only,,current,assignedIp(1):assignedEUI64Ip(2):assignedLinklocalIp(3):autoIp(4):dhcpv6(5):negotiate(6),Indicate the type of source of IPv6 address. The value can be one of following: 'assignedIp': Assigned global/site-local IPv6 address; 'assignedEUI64Ip': Assigned global/site-local IPv6 address by using EUI-64 interface identifier; 'assignedLinklocalIp': Assigned link-local IPv6 address.  'autoIp': Auto generated IPv6 address as a result of non-linklocal anycast/unicast address configuration; 'dhcpv6': Assigned IPv6 address through DHCPv6 protocol; 'negotiate': Assigned IPv6 address through negotiation;
.1.3.6.1.4.1.11863.6.50.1.1.1.7,TPLINK-IPV6ADDR-MIB::ipv6ParaConfigRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),the following values are states: these values may be used as follow:  active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.  When you create a new user,the default password is admin.
.1.3.6.1.4.1.11863.6.50.2,TPLINK-IPV6ADDR-MIB::tplinkIpv6AddrNotifications,,,,,,
.1.3.6.1.4.1.11863.6.51,TPLINK-HTTP-MIB::tplinkHttp,,,,,,Private MIB for HTTP configuration.
.1.3.6.1.4.1.11863.6.51.1,TPLINK-HTTP-MIB::tplinkHttpMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.51.1.1,TPLINK-HTTP-MIB::httpEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.51.1.2,TPLINK-HTTP-MIB::httpSessionTimeOut,INTEGER,read-write,,current,,HTTP session timeout in minutes.
.1.3.6.1.4.1.11863.6.51.1.3,TPLINK-HTTP-MIB::httpUserLimitEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.51.1.4,TPLINK-HTTP-MIB::httpUserLimitMaxAdminNum,INTEGER,read-write,,current,,The max num of admin users. You should enable HTTP user number limiting before setting this object.
.1.3.6.1.4.1.11863.6.51.1.5,TPLINK-HTTP-MIB::httpUserLimitMaxGuestNum,INTEGER,read-write,,current,,The max num of guest users. You should enable HTTP user number limiting before setting this object.
.1.3.6.1.4.1.11863.6.51.2,TPLINK-HTTP-MIB::tplinkHttpMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.52,TPLINK-TELNET-MIB::tplinkTelnet,,,,,,Private MIB for Telnet configuration.
.1.3.6.1.4.1.11863.6.52.1,TPLINK-TELNET-MIB::tplinkTelnetMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.52.1.1,TPLINK-TELNET-MIB::telnetConfig,INTEGER,read-write,,current,disable(0):enable(1),0. disable
.1.3.6.1.4.1.11863.6.52.2,TPLINK-TELNET-MIB::tplinkTelnetMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.53,TPLINK-IPV6STATICROUTE-MIB::tplinkIPv6StaticRouteMIB,,,,,,Private MIB for IPv6 static route configuration.
.1.3.6.1.4.1.11863.6.53.1,TPLINK-IPV6STATICROUTE-MIB::tplinkIPv6StaticRouteMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.53.1.1,TPLINK-IPV6STATICROUTE-MIB::tpIPv6StaticRouteConfig,,,,,,
.1.3.6.1.4.1.11863.6.53.1.1.1,TPLINK-IPV6STATICROUTE-MIB::tpIPv6StaticRouteConfigTable,,not-accessible,,current,,A list of static route entries.Route is choosing a best way to trasmit the data from the source to the destination.Static route is a special route,it is set by the administrator,and it is not automatically changed along with the change of network topo, so the static route is most used in the net which is small and has a fixed topo with  virtues of simple,efficient and reliable.
.1.3.6.1.4.1.11863.6.53.1.1.1.1,TPLINK-IPV6STATICROUTE-MIB::tpIPv6StaticRouteConfigEntry,,not-accessible,tpIPv6StaticRouteItemDesIp:tpIPv6StaticRouteItemPrefixLen:tpIPv6StaticRouteItemNexthop,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.53.1.1.1.1.1,TPLINK-IPV6STATICROUTE-MIB::tpIPv6StaticRouteItemDesIp,OCTET,read-only,,current,,The ip Address of the packet should be arrived
.1.3.6.1.4.1.11863.6.53.1.1.1.1.2,TPLINK-IPV6STATICROUTE-MIB::tpIPv6StaticRouteItemPrefixLen,INTEGER,read-only,,current,,The mask of the ip.
.1.3.6.1.4.1.11863.6.53.1.1.1.1.3,TPLINK-IPV6STATICROUTE-MIB::tpIPv6StaticRouteItemNexthop,OCTET,read-create,,current,,The next jump ip address which the packet would be sent to by the switch.
.1.3.6.1.4.1.11863.6.53.1.1.1.1.4,TPLINK-IPV6STATICROUTE-MIB::tpIPv6StaticRouteItemInterfaceName,OCTET,read-only,,current,,The name of the VLAN interface.
.1.3.6.1.4.1.11863.6.53.1.1.1.1.5,TPLINK-IPV6STATICROUTE-MIB::tpIPv6StaticRouteItemStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.53.2,TPLINK-IPV6STATICROUTE-MIB::tplinkIPv6StaticRouteNotifications,,,,,,
.1.3.6.1.4.1.11863.6.54,TPLINK-STATICARP-MIB::tplinkStaticARPMIB,,,,,,Private MIB for static ARP configuration.
.1.3.6.1.4.1.11863.6.54.1,TPLINK-STATICARP-MIB::tplinkStaticARPMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.54.1.1,TPLINK-STATICARP-MIB::tpStaticARPConfig,,,,,,
.1.3.6.1.4.1.11863.6.54.1.1.1,TPLINK-STATICARP-MIB::tpStaticARPConfigTable,,not-accessible,,current,,A list of static ARP entries.ARP Presented here is a protocol that allows dynamic
.1.3.6.1.4.1.11863.6.54.1.1.1.1,TPLINK-STATICARP-MIB::tpStaticARPConfigEntry,,not-accessible,tpStaticARPItemIp,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.54.1.1.1.1.1,TPLINK-STATICARP-MIB::tpStaticARPItemIp,IpAddress,read-only,,current,,The ip Address of the ARP entry.
.1.3.6.1.4.1.11863.6.54.1.1.1.1.2,TPLINK-STATICARP-MIB::tpStaticARPItemMac,OCTET,read-create,,current,,The Mac (hardware) address of the ARP entry.
.1.3.6.1.4.1.11863.6.54.1.1.1.1.3,TPLINK-STATICARP-MIB::tpStaticArpItemInterfaceName,OCTET,read-only,,current,,The name of the interface.
.1.3.6.1.4.1.11863.6.54.1.1.1.1.4,TPLINK-STATICARP-MIB::tpStaticARPItemStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.54.2,TPLINK-STATICARP-MIB::tplinkStaticARPNotifications,,,,,,
.1.3.6.1.4.1.11863.6.57,TPLINK-pppoeConfig-MIB::tplinkPPPoEConfigMIB,,,,,,Private MIB for PPPoE Circuit ID configuration.
.1.3.6.1.4.1.11863.6.57.1,TPLINK-pppoeConfig-MIB::tplinkPPPoEConfigMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.57.1.1,TPLINK-pppoeConfig-MIB::tpPppoeIdInsertionGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.57.1.1.1,TPLINK-pppoeConfig-MIB::tpPppoeIdInsertionGlobalEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.57.1.2,TPLINK-pppoeConfig-MIB::tpPppoeIdInsertionPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.57.1.2.1,TPLINK-pppoeConfig-MIB::tpPppoeIdInsertionPortConfigTable,,not-accessible,,current,,A list of PPPoE Circuit-Id port config entries.
.1.3.6.1.4.1.11863.6.57.1.2.1.1,TPLINK-pppoeConfig-MIB::tpPppoeIdInsertionPortConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of PPPoE Circuit-ID port config. Here you can configure the ports for the PPPoE Circuit-ID.
.1.3.6.1.4.1.11863.6.57.1.2.1.1.1,TPLINK-pppoeConfig-MIB::tpPppoeIdInsertionPortIndex,OCTET,read-only,,current,,This object indicates the port number.
.1.3.6.1.4.1.11863.6.57.1.2.1.1.2,TPLINK-pppoeConfig-MIB::tpPppoeCircuitIdPortConfigEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1. enable Select Enable/Disable the PPPoE Circuit-ID Insertion feature for the port.
.1.3.6.1.4.1.11863.6.57.1.2.1.1.3,TPLINK-pppoeConfig-MIB::tpPppoeCircuitIdPortConfigIdType,INTEGER,read-write,,current,switchIp(0):switchMac(1):switchUdf(2):switchUdfOnly(3),0. switch IP:The switch's IP address will be used to encode the Circuit-ID option. 1. switch MAC:The switch's MAC address will be used to encode the Circuit-ID option. Select Circuit-ID type for the port.
.1.3.6.1.4.1.11863.6.57.1.2.1.1.4,TPLINK-pppoeConfig-MIB::tpPppoeCircuitIdPortConfigUdfValue,OCTET,read-create,,current,,A user specified string with the maximum length of 40. 
.1.3.6.1.4.1.11863.6.57.1.2.1.1.5,TPLINK-pppoeConfig-MIB::tpPppoeRemoteIdPortConfigEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1. enable Select Enable/Disable the PPPoE Remote-ID Insertion feature for the port.
.1.3.6.1.4.1.11863.6.57.1.2.1.1.6,TPLINK-pppoeConfig-MIB::tpPppoeRemoteIdPortConfigValue,OCTET,read-create,,current,,A user specified string with the maximum length of 40. 
.1.3.6.1.4.1.11863.6.57.2,TPLINK-pppoeConfig-MIB::tplinkPPPoEConfigNotifications,,,,,,
.1.3.6.1.4.1.11863.6.58,TPLINK-DLDP-MIB::tplinkDldpMIB,,,,,,DLDP Private MIB.
.1.3.6.1.4.1.11863.6.58.1,TPLINK-DLDP-MIB::tplinkDldpMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.58.1.1,TPLINK-DLDP-MIB::tpDldpEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable DLDP function globally on the Switch. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.58.1.2,TPLINK-DLDP-MIB::tpDldpInterval,INTEGER,read-write,,current,,The interval time of advertisement
.1.3.6.1.4.1.11863.6.58.1.3,TPLINK-DLDP-MIB::tpDldpShutmode,INTEGER,read-write,,current,auto(0):manual(1),Select DLDP shut-mode globally on the Switch. 0. auto  1. manual
.1.3.6.1.4.1.11863.6.58.1.4,TPLINK-DLDP-MIB::tpDldpCtrlTable,,not-accessible,,current,,A list of port configuration for DLDP.
.1.3.6.1.4.1.11863.6.58.1.4.1,TPLINK-DLDP-MIB::tpDldpCtrlEntry,,not-accessible,tpDldpPortId,current,,The entry of the port DLDP list .
.1.3.6.1.4.1.11863.6.58.1.4.1.1,TPLINK-DLDP-MIB::tpDldpPortId,INTEGER,read-only,,current,,The port id.
.1.3.6.1.4.1.11863.6.58.1.4.1.2,TPLINK-DLDP-MIB::tpDldpState,INTEGER,read-write,,current,disable(0):enable(1),The state of the DLDP.
.1.3.6.1.4.1.11863.6.58.1.4.1.3,TPLINK-DLDP-MIB::tpDldpProtocolState,INTEGER,read-only,,current,initial(0):inactive(1):active(2):probe(3):adver(4):disable(5),The protocol state of the port.
.1.3.6.1.4.1.11863.6.58.1.4.1.4,TPLINK-DLDP-MIB::tpDldpLinkState,INTEGER,read-only,,current,link-down(0):link-up(1),The link state of the port.
.1.3.6.1.4.1.11863.6.58.1.4.1.5,TPLINK-DLDP-MIB::tpDldpNeighborState,INTEGER,read-only,,current,unknown(0):unidirectional(1):bidirectional(2):aging(3):notAccess(4),The neighor state of the port.
.1.3.6.1.4.1.11863.6.58.2,TPLINK-DLDP-MIB::tplinkDldpNotifications,,,,,,
.1.3.6.1.4.1.11863.6.60,TPLINK-ETHERNETOAM-MIB::tplinkEthernetOam,,,,,,Private MIB for Ethernet OAM.
.1.3.6.1.4.1.11863.6.60.1,TPLINK-ETHERNETOAM-MIB::tplinkEthernetOamMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.60.1.1,TPLINK-ETHERNETOAM-MIB::ethernetOamBasicConfig,,,,,,
.1.3.6.1.4.1.11863.6.60.1.1.1,TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgTable,,not-accessible,,current,,A table that contains the basic configuration of each port.
.1.3.6.1.4.1.11863.6.60.1.1.1.1,TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgEntry,,not-accessible,ifIndex,current,,An entry that contains the basic configuration of each port.
.1.3.6.1.4.1.11863.6.60.1.1.1.1.1,TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.1.1.1.2,TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgMode,INTEGER,read-write,,current,passive(0):active(1),Select mode of Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.1.1.1.3,TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgState,INTEGER,read-write,,current,disable(0):enable(1),Select state of Ethernet OAM function.
.1.3.6.1.4.1.11863.6.60.1.1.1.1.4,TPLINK-ETHERNETOAMBASICCFG-MIB::ethernetOamBasicCfgLAG,OCTET,read-only,,current,,Displays the LAG number of the port.
.1.3.6.1.4.1.11863.6.60.1.2,TPLINK-ETHERNETOAM-MIB::ethernetOamLinkMonConfig,,,,,,
.1.3.6.1.4.1.11863.6.60.1.2.1,TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgTable,,not-accessible,,current,,A table that contains link monitoring configuration of each port.
.1.3.6.1.4.1.11863.6.60.1.2.1.1,TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgEntry,,not-accessible,ifIndex:ethernetOamLinkMonCfgEvent,current,,An entry that contains the link monitoring configuration of each port.
.1.3.6.1.4.1.11863.6.60.1.2.1.1.1,TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.2.1.1.2,TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgEvent,INTEGER,read-only,,current,symbol-period(1):frame(2):frame-period(3):frame-seconds(4),Select various types of link monitoring.
.1.3.6.1.4.1.11863.6.60.1.2.1.1.3,TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgThreshold,Unsigned32,read-write,,current,,Enter the number of errors that is required to be equal to or greater than in order for the event to be generated.
.1.3.6.1.4.1.11863.6.60.1.2.1.1.4,TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgWindow,Unsigned32,read-write,,current,,Enter the period of the event. The unit is 100ms for symbol-period, frame, frame-seconds link event and 1 frame for frame-period link event.
.1.3.6.1.4.1.11863.6.60.1.2.1.1.5,TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgNotify,INTEGER,read-write,,current,disable(0):enable(1),Select to enable or disable the event notification.
.1.3.6.1.4.1.11863.6.60.1.2.1.1.6,TPLINK-ETHERNETOAMLINKMONCFG-MIB::ethernetOamLinkMonCfgLAG,OCTET,read-only,,current,,Displays the LAG number of the port.
.1.3.6.1.4.1.11863.6.60.1.3,TPLINK-ETHERNETOAM-MIB::ethernetOamRfiConfig,,,,,,
.1.3.6.1.4.1.11863.6.60.1.3.1,TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgTable,,not-accessible,,current,,A table that contains remote failure indication configuration of each port.
.1.3.6.1.4.1.11863.6.60.1.3.1.1,TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgEntry,,not-accessible,ifIndex,current,,An entry that contains the remote failure indication configuration of each port.
.1.3.6.1.4.1.11863.6.60.1.3.1.1.1,TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.3.1.1.2,TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgDyingGaspNotify,INTEGER,read-write,,current,disable(0):enable(1),Select to enable or disable the event notification when critical link event is Dying Gasp.
.1.3.6.1.4.1.11863.6.60.1.3.1.1.3,TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgCriticalEventNotify,INTEGER,read-write,,current,disable(0):enable(1),Select to enable or disable the event notification when critical link event is Critical Event.
.1.3.6.1.4.1.11863.6.60.1.3.1.1.4,TPLINK-ETHERNETOAMRFICFG-MIB::ethernetOamRfiCfgLAG,OCTET,read-only,,current,,Displays the LAG number of the port.
.1.3.6.1.4.1.11863.6.60.1.4,TPLINK-ETHERNETOAM-MIB::ethernetOamRmtLbConfig,,,,,,
.1.3.6.1.4.1.11863.6.60.1.4.1,TPLINK-ETHERNETOAMRMTLBCFG-MIB::ethernetOamRmtLbCfgTable,,not-accessible,,current,,A table that contains remote loopback configuration of each port. 
.1.3.6.1.4.1.11863.6.60.1.4.1.1,TPLINK-ETHERNETOAMRMTLBCFG-MIB::ethernetOamRmtLbCfgEntry,,not-accessible,ifIndex,current,,An entry that contains the remote loopback configuration of each port.
.1.3.6.1.4.1.11863.6.60.1.4.1.1.1,TPLINK-ETHERNETOAMRMTLBCFG-MIB::ethernetOamRmtLbCfgPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.4.1.1.2,TPLINK-ETHERNETOAMRMTLBCFG-MIB::ethernetOamRmtLbCfgReceivedRemoteLoopback,INTEGER,read-write,,current,ignore(0):process(1),Select to Process or Ignore the received Ethernet OAM remote loopback command.
.1.3.6.1.4.1.11863.6.60.1.4.1.1.3,TPLINK-ETHERNETOAMRMTLBCFG-MIB::ethernetOamRmtLbCfgRemoteLoopback,INTEGER,read-write,,current,stop(0):start(1):unchanged(2),Select to Start or Stop the Ethernet OAM remote loopback function.
.1.3.6.1.4.1.11863.6.60.1.4.1.1.4,TPLINK-ETHERNETOAMRMTLBCFG-MIB::ethernetOamRmtLbCfgLAG,OCTET,read-only,,current,,Displays the LAG number of the port.
.1.3.6.1.4.1.11863.6.60.1.5,TPLINK-ETHERNETOAM-MIB::ethernetOamDiscoveryInfo,,,,,,
.1.3.6.1.4.1.11863.6.60.1.5.1,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoTable,,not-accessible,,current,,A table that contains the discovery information of each port.
.1.3.6.1.4.1.11863.6.60.1.5.1.1,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoEntry,,not-accessible,ifIndex,current,,An entry that contains the discovery information of each port.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.1,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.2,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocOAM,INTEGER,read-only,,current,disabled(0):enabled(1),Displays the state of Ethernet OAM function.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.3,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocMode,INTEGER,read-only,,current,passive(0):active(1),Displays the mode of local Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.4,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocMaxOAMPDU,INTEGER,read-only,,current,,Displays the Maximum OAMPDU size of local Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.5,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocRemoteLoopback,INTEGER,read-only,,current,not-supported(0):supported(1),Displays whether local Ethernet OAM client support remote loopback or not.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.6,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocUnidirection,INTEGER,read-only,,current,not-supported(0):supported(1),Displays whether local Ethernet OAM client support unidirection OAM operation or not.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.7,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocLinkMonitoring,INTEGER,read-only,,current,not-supported(0):supported(1),Displays whether local Ethernet OAM client support link monitoring or not.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.8,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocVariableRequest,INTEGER,read-only,,current,not-supported(0):supported(1),Displays whether local Ethernet OAM client support variable request or not.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.9,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocPduRevision,INTEGER,read-only,,current,,Displays the current configuration revision of local Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.10,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocOperationStatus,OCTET,read-only,,current,,Displays the operation status of local Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.11,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoLocLoopbackStatus,OCTET,read-only,,current,,Displays the loopback status of local Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.12,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtMode,INTEGER,read-only,,current,passive(0):active(1),Displays the mode of remote Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.13,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtMacAddress,OCTET,read-only,,current,,Displays the MAC address of remote Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.14,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtVendorOUI,OCTET,read-only,,current,,Displays the vendor OUI of remote Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.15,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtMaxOAMPDU,INTEGER,read-only,,current,,Displays the Maximum OAMPDU size of remote Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.16,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtRemoteLoopback,INTEGER,read-only,,current,not-supported(0):supported(1),Displays whether remote Ethernet OAM client support remote loopback or not.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.17,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtUnidirection,INTEGER,read-only,,current,not-supported(0):supported(1),Displays whether remote Ethernet OAM client support unidirection OAM operation or not.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.18,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtLinkMonitoring,INTEGER,read-only,,current,not-supported(0):supported(1),Displays whether remote Ethernet OAM client support link monitoring or not.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.19,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtVariableRequest,INTEGER,read-only,,current,not-supported(0):supported(1),Displays whether remote Ethernet OAM client support variable request or not.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.20,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtPduRevision,INTEGER,read-only,,current,,Displays the current configuration revision of remote Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.5.1.1.21,TPLINK-ETHERNETOAMDISCINFO-MIB::ethernetOamDiscInfoRmtVendorInfo,OCTET,read-only,,current,,Displays the vendor information of remote Ethernet OAM client.
.1.3.6.1.4.1.11863.6.60.1.6,TPLINK-ETHERNETOAM-MIB::ethernetOamStatistics,,,,,,
.1.3.6.1.4.1.11863.6.60.1.6.1,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatTable,,not-accessible,,current,,A table that contains the Ethernet OAM traffic information of each port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatEntry,,not-accessible,ifIndex,current,,An entry that contains the Ethernet OAM traffic information of each port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.1,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.2,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatClear,INTEGER,read-write,,current,unchanged(0):clear(1),Clear the statistics of OAMPDUs.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.3,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatInfoTx,Counter32,read-only,,current,,Displays the number of information OAMPDUs transmitted on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.4,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatInfoRx,Counter32,read-only,,current,,Displays the number of information OAMPDUs received on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.5,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatUniEventTx,Counter32,read-only,,current,,Displays the number of unique event notification OAMPDUs transmitted on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.6,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatUniEventRx,Counter32,read-only,,current,,Displays the number of unique event notification OAMPDUs received on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.7,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatDupEventTx,Counter32,read-only,,current,,Displays the number of duplicate event notification OAMPDUs transmitted on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.8,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatDupEventRx,Counter32,read-only,,current,,Displays the number of duplicate event notification OAMPDUs received on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.9,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatVarReqTx,Counter32,read-only,,current,,Displays the number of variable request OAMPDUs transmitted on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.10,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatVarReqRx,Counter32,read-only,,current,,Displays the number of variable request OAMPDUs received on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.11,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatVarRespTx,Counter32,read-only,,current,,Displays the number of variable response OAMPDUs transmitted on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.12,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatVarRespRx,Counter32,read-only,,current,,Displays the number of variable response OAMPDUs received on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.13,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatLoopbackCtrlTx,Counter32,read-only,,current,,Displays the number of loopback control OAMPDUs transmitted on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.14,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatLoopbackCtrlRx,Counter32,read-only,,current,,Displays the number of loopback control OAMPDUs received on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.15,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatOrgSpecTx,Counter32,read-only,,current,,Displays the number of organization specific OAMPDUs transmitted on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.16,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatOrgSpecRx,Counter32,read-only,,current,,Displays the number of organization specific OAMPDUs received on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.17,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatUnsupportedTx,Counter32,read-only,,current,,Displays the number of unsupported OAMPDUs transmitted on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.18,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatUnsupportedRx,Counter32,read-only,,current,,Displays the number of unsupported OAMPDUs received on the port.
.1.3.6.1.4.1.11863.6.60.1.6.1.1.19,TPLINK-ETHERNETOAMPDUSTAT-MIB::ethernetOamPduStatFrmLostDueToOam,Counter32,read-only,,current,,Displays the number of frames that would otherwise be transmitted by the OAM sublayer, but could not be due to an internal OAM sublayer transmit error.
.1.3.6.1.4.1.11863.6.60.1.7,TPLINK-ETHERNETOAM-MIB::ethernetOamEventLog,,,,,,
.1.3.6.1.4.1.11863.6.60.1.7.1,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatTable,,not-accessible,,current,,A table that contains the Ethernet OAM event log statistics of each port.
.1.3.6.1.4.1.11863.6.60.1.7.1.1,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatEntry,,not-accessible,ifIndex,current,,An entry that contains the Ethernet OAM event log statistics of each port.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.1,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.2,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatLocalSymbolPeriod,Counter32,read-only,,current,,Displays the number of error-symbol-period link events occurred on the local link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.3,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatRemoteSymbolPeriod,Counter32,read-only,,current,,Displays the number of error-symbol-period link events occurred on the remote link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.4,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatLocalFrame,Counter32,read-only,,current,,Displays the number of error-frame link events occurred on the local link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.5,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatRemoteFrame,Counter32,read-only,,current,,Displays the number of error-frame link events occurred on the remote link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.6,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatLocalFramePeriod,Counter32,read-only,,current,,Displays the number of error-frame-period link events occurred on the local link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.7,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatRemoteFramePeriod,Counter32,read-only,,current,,Displays the number of error-frame-period link events occurred on the remote link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.8,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatLocalFrameSeconds,Counter32,read-only,,current,,Displays the number of error-frame-seconds link events occurred on the local link or remote link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.9,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatRemoteFrameSeconds,Counter32,read-only,,current,,Displays the number of error-frame-seconds link events occurred on the local link or remote link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.10,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatLocalDyingGasp,Counter32,read-only,,current,,Displays the number of Dying Gasp link events occurred on the local link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.11,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatRemoteDyingGasp,Counter32,read-only,,current,,Displays the number of Dying Gasp link events occurred on the remote link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.12,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatLocalCriticalEvent,Counter32,read-only,,current,,Displays the number of Critical Event link events occurred on the local link.
.1.3.6.1.4.1.11863.6.60.1.7.1.1.13,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogStatRemoteCriticalEvent,Counter32,read-only,,current,,Displays the number of Critical Event link events occurred on the remote link.
.1.3.6.1.4.1.11863.6.60.1.7.2,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogTable,,not-accessible,,current,,A table that contains the Ethernet OAM event log of each port.
.1.3.6.1.4.1.11863.6.60.1.7.2.1,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogEntry,,not-accessible,ifIndex:ethernetOamEventLogSeq,current,,An entry that contains the Ethernet OAM event log of each port.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.1,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.2,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogSeq,INTEGER,read-only,,current,,Displays the sequence number.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.3,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogType,INTEGER,read-only,,current,symbol-period(1):frame(2):frame-period(3):frame-seconds(4):link-fault(16):dying-gasp(32):critical-event(48),Displays the type of the link event.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.4,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogLocation,INTEGER,read-only,,current,local(0):remote(1),Displays the location when the link event ocurred.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.5,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogTimestamp,OCTET,read-only,,current,,Displays the timestamp when the link event ocurred.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.6,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogValue,Counter32,read-only,,current,,Displays the number of errors in the period.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.7,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogWindow,Counter32,read-only,,current,,Displays the period of the link event.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.8,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogThreshold,Counter32,read-only,,current,,Displays the number of errors that is required to be equal to or greater than in order for the event to be generated.
.1.3.6.1.4.1.11863.6.60.1.7.2.1.9,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogAccumulatedErr,Counter64,read-only,,current,,Displays the number of errors that have been detected since the OAM sublayer was reset.
.1.3.6.1.4.1.11863.6.60.1.7.3,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogClearTable,,not-accessible,,current,,You can clear both the statistics and log of link events of specified port in the table.
.1.3.6.1.4.1.11863.6.60.1.7.3.1,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogClearEntry,,not-accessible,ifIndex,current,,You can clear both the statistics and log of link events of specified port in the entry.
.1.3.6.1.4.1.11863.6.60.1.7.3.1.1,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogClearPort,OCTET,read-only,,current,,Displays the port number.
.1.3.6.1.4.1.11863.6.60.1.7.3.1.2,TPLINK-ETHERNETOAMEVENTLOG-MIB::ethernetOamEventLogClearAction,INTEGER,read-write,,current,unchange(0):clear(1),Clear both the statistics and log of link events of specified port.
.1.3.6.1.4.1.11863.6.60.2,TPLINK-ETHERNETOAM-MIB::tplinkEthernetOamMIBNotifications,,,,,,
.1.3.6.1.4.1.11863.6.65,TPLINK-VRRP-MIB::tplinkVrrpMIB,,,,,,This MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers.
.1.3.6.1.4.1.11863.6.65.1,TPLINK-VRRP-MIB::tplinkVrrpMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.65.1.1,TPLINK-VRRP-MIB::tpVrrpGlobalCtrl,,,,,,
.1.3.6.1.4.1.11863.6.65.1.1.1,TPLINK-VRRP-MIB::tpVrrpGlobalCtrlTable,,not-accessible,,current,,Operations table for a VRRP router which consists of a
.1.3.6.1.4.1.11863.6.65.1.1.1.1,TPLINK-VRRP-MIB::tpVrrpGlobalCtrlEntry,,not-accessible,tpVrrpVrid:tpVrrpVid,current,, An entry in the tpVrrpGlobalCtrlTable containing the operational characteristics of a virtual router. On a VRRP router,a given virtual router is identified by a combination of the VID and VRID.Rows in the table can be modified according to the tpVrrpStatus.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.1,TPLINK-VRRP-MIB::tpVrrpVrid,INTEGER,read-only,,current,,This object contains the Virtual Router Identifier (VRID).
.1.3.6.1.4.1.11863.6.65.1.1.1.1.2,TPLINK-VRRP-MIB::tpVrrpVid,INTEGER,read-only,,current,,The interface index
.1.3.6.1.4.1.11863.6.65.1.1.1.1.3,TPLINK-VRRP-MIB::tpVrrpIntfStatus,INTEGER,read-only,,current,interfacevlan(1):routedport(0),The interface status
.1.3.6.1.4.1.11863.6.65.1.1.1.1.4,TPLINK-VRRP-MIB::tpVrrpInterfaceIP,IpAddress,read-only,,current,,The interface IP address.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.5,TPLINK-VRRP-MIB::tpVrrpMacAddress,OCTET,read-only,,current,,The virtual MAC address of the virtual router.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.6,TPLINK-VRRP-MIB::tpVrrpDescription,OCTET,read-create,,current,,The description of the VRRP.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.7,TPLINK-VRRP-MIB::tpVrrpPrimaryVirtualIp,IpAddress,read-only,,current,,This is the IP address listed as the source in VRRP advertisement last received by this virtual router.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.8,TPLINK-VRRP-MIB::tpVrrpRunPriority,INTEGER,read-only,,current,,This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority.A priority of 255 is used for the router that owns the associated IP address(es).
.1.3.6.1.4.1.11863.6.65.1.1.1.1.9,TPLINK-VRRP-MIB::tpVrrpConfigPriority,INTEGER,read-create,,current,,This object operate the priority to be used for the virtual router master election process.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.10,TPLINK-VRRP-MIB::tpVrrpAdvertisement,INTEGER,read-create,,current,,The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.11,TPLINK-VRRP-MIB::tpVrrpPreeptMode,INTEGER,read-create,,current,enable(0):disable(1),Controls whether a higher priority virtual router will preempt a lower priority master
.1.3.6.1.4.1.11863.6.65.1.1.1.1.12,TPLINK-VRRP-MIB::tpVrrpTimeDelay,INTEGER,read-create,,current,,This is object is used to config the delay timer associated with the VRRP.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.13,TPLINK-VRRP-MIB::tpVrrpAuthType,INTEGER,read-create,,current,normal(0):simple(1):md5(2),Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifindex(Vlan ID).
.1.3.6.1.4.1.11863.6.65.1.1.1.1.14,TPLINK-VRRP-MIB::tpVrrpKey,OCTET,read-create,,current,,The Authentication Key. This object is set according to the value of the 'tpVrrpAuthType' object ('Simple' or 'MD5').
.1.3.6.1.4.1.11863.6.65.1.1.1.1.15,TPLINK-VRRP-MIB::tpVrrpState,INTEGER,read-only,,current,initialize(0):backup(1):master(2),The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router.
.1.3.6.1.4.1.11863.6.65.1.1.1.1.16,TPLINK-VRRP-MIB::tpVrrpStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),The following values are states: these values may be used as follow:  active(1),if the entry is being used. createAndGo(4),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.65.1.2,TPLINK-VRRP-MIB::tpVrrpVirtualIpCtrl,,,,,,
.1.3.6.1.4.1.11863.6.65.1.2.1,TPLINK-VRRP-MIB::tpVrrpVirtualIpCtrlTable,,not-accessible,,current,,The table of addresses associated with this virtual router.
.1.3.6.1.4.1.11863.6.65.1.2.1.1,TPLINK-VRRP-MIB::tpVrrpVirtualIpCtrlEntry,,not-accessible,tpVrrpVirtualIpVrid:tpVrrpVirtualIpVid:tpVrrpVirtualIpAddress,current,, An entry in the table contains an IP address that is associated with a virtual router.
.1.3.6.1.4.1.11863.6.65.1.2.1.1.1,TPLINK-VRRP-MIB::tpVrrpVirtualIpVrid,INTEGER,read-only,,current,,This object contains the Virtual Router Identifier (VRID).
.1.3.6.1.4.1.11863.6.65.1.2.1.1.2,TPLINK-VRRP-MIB::tpVrrpVirtualIpVid,INTEGER,read-only,,current,,The interface index
.1.3.6.1.4.1.11863.6.65.1.2.1.1.3,TPLINK-VRRP-MIB::tpVrrpVirtualIpintfStatus,INTEGER,read-only,,current,interfacevlan(1):routedport(0),The interface status
.1.3.6.1.4.1.11863.6.65.1.2.1.1.4,TPLINK-VRRP-MIB::tpVrrpVirtualIpAddress,IpAddress,read-only,,current,,The virtual IP address associated with a virtual router. 
.1.3.6.1.4.1.11863.6.65.1.2.1.1.5,TPLINK-VRRP-MIB::tpVrrpVirtualIpStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),The following values are states: these values may be used as follow:  active(1),if the entry is being used. createAndGo(4),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.65.1.3,TPLINK-VRRP-MIB::tpVrrpTrackCtrl,,,,,,
.1.3.6.1.4.1.11863.6.65.1.3.1,TPLINK-VRRP-MIB::tpVrrpTrackCtrlTable,,not-accessible,,current,,The table of ifindex tracked by the virtual router.
.1.3.6.1.4.1.11863.6.65.1.3.1.1,TPLINK-VRRP-MIB::tpVrrpTrackCtrlEntry,,not-accessible,tpVrrpTrackVrid:tpVrrpTrackVid:tpVrrpTrackInterface,current,, An entry in the table contains the ifindex and reduced priority that is associated with a virtual router. 
.1.3.6.1.4.1.11863.6.65.1.3.1.1.1,TPLINK-VRRP-MIB::tpVrrpTrackVrid,INTEGER,read-only,,current,,This object contains the Virtual Router Identifier (VRID).
.1.3.6.1.4.1.11863.6.65.1.3.1.1.2,TPLINK-VRRP-MIB::tpVrrpTrackVid,INTEGER,read-only,,current,,The interface index
.1.3.6.1.4.1.11863.6.65.1.3.1.1.3,TPLINK-VRRP-MIB::tpVrrpTrackIntfStatus,INTEGER,read-only,,current,interfacevlan(1):routedport(0),The interface status
.1.3.6.1.4.1.11863.6.65.1.3.1.1.4,TPLINK-VRRP-MIB::tpVrrpTrackInterface,INTEGER,read-only,,current,,The ifindex tracked by the virtual router.
.1.3.6.1.4.1.11863.6.65.1.3.1.1.5,TPLINK-VRRP-MIB::tpVrrpTrackIntfTrackedStatus,INTEGER,read-only,,current,interfacevlan(1):routedport(0),The interface status
.1.3.6.1.4.1.11863.6.65.1.3.1.1.6,TPLINK-VRRP-MIB::tpVrrpTrackPriortiy,INTEGER,read-create,,current,,The object operate the priority of the virtual router when the interface tracked linkdown.
.1.3.6.1.4.1.11863.6.65.1.3.1.1.7,TPLINK-VRRP-MIB::tpVrrpLinkState,INTEGER,read-only,,current,off(0):on(1),The object display the status of the interface tracked .
.1.3.6.1.4.1.11863.6.65.1.3.1.1.8,TPLINK-VRRP-MIB::tpVrrpTrackStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),The following values are states: these values may be used as follow:  active(1),if the entry is being used. createAndGo(4),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.65.1.4,TPLINK-VRRP-MIB::tpVrrpStatistics,,,,,,
.1.3.6.1.4.1.11863.6.65.1.4.1,TPLINK-VRRP-MIB::tpVrrpChecksumErrors,INTEGER,read-only,,current,,The total number of VRRP packets received with an invalid VRRP checksum value.
.1.3.6.1.4.1.11863.6.65.1.4.2,TPLINK-VRRP-MIB::tpVrrpVersionErrors,INTEGER,read-only,,current,,The total number of VRRP packets received with an unknown or unsupported version number.
.1.3.6.1.4.1.11863.6.65.1.4.3,TPLINK-VRRP-MIB::tpVrrpVridErrors,INTEGER,read-only,,current,,The total number of VRRP packets received with an invalid VRID for this virtual router.
.1.3.6.1.4.1.11863.6.65.1.4.4,TPLINK-VRRP-MIB::tpVrrpStatsTable,,not-accessible,,current,,Table of virtual router statistics.
.1.3.6.1.4.1.11863.6.65.1.4.4.1,TPLINK-VRRP-MIB::tpVrrpStatsEntry,,not-accessible,tpVrrpStatsVrid:tpVrrpStatsVid,current,,An entry in the table, containing statistics information about a given virtual router.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.1,TPLINK-VRRP-MIB::tpVrrpStatsVrid,INTEGER,read-only,,current,,the VRID of the virtual router. It is used together with interface ID to specify the virtual router to operate statistics.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.2,TPLINK-VRRP-MIB::tpVrrpStatsVid,INTEGER,read-only,,current,,the interface ID of the virtual router. It is used together with VRID to specify the virtual router to operate statistics.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.3,TPLINK-VRRP-MIB::tpVrrpStatsIntfStatus,INTEGER,read-only,,current,interfacevlan(1):routedport(0),The interface status
.1.3.6.1.4.1.11863.6.65.1.4.4.1.4,TPLINK-VRRP-MIB::tpVrrpChecksumErr,INTEGER,read-only,,current,,The total number of VRRP packets received with an invalid VRRP checksum value by this virtual router.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.5,TPLINK-VRRP-MIB::tpVrrpVersionErr,INTEGER,read-only,,current,,The total number of VRRP packets received with an unknown or unsupported version number by this virtual router.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.6,TPLINK-VRRP-MIB::tpVrrpStatsBecomeMaster,INTEGER,read-only,,current,,The total number of times that this virtual router's state has transitioned to MASTER.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.7,TPLINK-VRRP-MIB::tpvrrpStatsAdvertiseRcvd,INTEGER,read-only,,current,,The total number of VRRP advertisements received by this virtual router.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.8,TPLINK-VRRP-MIB::tpvrrpStatsAdvertiseSent,INTEGER,read-only,,current,,The total number of VRRP advertisements sent by this virtual router.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.9,TPLINK-VRRP-MIB::tpvrrpStatsAdvertiseIntervalErrors,INTEGER,read-only,,current,,The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.10,TPLINK-VRRP-MIB::tpvrrpStatsAuthFailures,INTEGER,read-only,,current,,The total number of VRRP packets received that do not pass the authentication check.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.11,TPLINK-VRRP-MIB::tpvrrpStatsIpTtlErrors,INTEGER,read-only,,current,,The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.12,TPLINK-VRRP-MIB::tpvrrpStatsPriorityZeroPktsRcvd,INTEGER,read-only,,current,,The total number of VRRP packets received by the virtual router with a priority of '0'.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.13,TPLINK-VRRP-MIB::tpvrrpStatsPriorityZeroPktsSent,INTEGER,read-only,,current,,The total number of VRRP packets sent by the virtual router with a priority of '0'.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.14,TPLINK-VRRP-MIB::tpvrrpStatsInvalidTypePktsRcvd,INTEGER,read-only,,current,,The number of VRRP packets received by the virtual router with an invalid value in the 'type' field.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.15,TPLINK-VRRP-MIB::tpvrrpStatsAddressListErrors,INTEGER,read-only,,current,,The total number of packets received for which the address list does not match the locally configured list for the virtual router.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.16,TPLINK-VRRP-MIB::tpvrrpStatsInvalidAuthType,INTEGER,read-only,,current,,The total number of packets received with an unknown authentication type.
.1.3.6.1.4.1.11863.6.65.1.4.4.1.17,TPLINK-VRRP-MIB::tpvrrpStatsAuthTypeMismatch,INTEGER,read-only,,current,,The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`vrrpOperAuthType').
.1.3.6.1.4.1.11863.6.65.1.4.4.1.18,TPLINK-VRRP-MIB::tpvrrpStatsPacketLengthErrors,INTEGER,read-only,,current,,The total number of packets received with a packet length less than the length of the VRRP header.
.1.3.6.1.4.1.11863.6.65.1.4.5,TPLINK-VRRP-MIB::tpvrrpStatsClear,INTEGER,read-write,,current,active(1):clear(0),The following values are states: these values may be used as follow:  active(1),if the entry is being used. clear(0),set the entry to 0.
.1.3.6.1.4.1.11863.6.65.2,TPLINK-VRRP-MIB::tplinkVrrpNotifications,,,,,,
.1.3.6.1.4.1.11863.6.76,TPLINK-ROUTEMAP-MIB::tplinkRouteMapMIB,,,,,,Private MIB for route map configuration.
.1.3.6.1.4.1.11863.6.76.1,TPLINK-ROUTEMAP-MIB::tplinkRouteMapMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.76.1.1,TPLINK-ROUTEMAP-MIB::tpIpPrefixConfig,,,,,,
.1.3.6.1.4.1.11863.6.76.1.1.1,TPLINK-ROUTEMAP-MIB::tpIpPrefixConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.11863.6.76.1.1.1.1,TPLINK-ROUTEMAP-MIB::tpIpPrefixConfigEntry,,not-accessible,tpIpPrefixName:tpIpPrefixSeq,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.76.1.1.1.1.1,TPLINK-ROUTEMAP-MIB::tpIpPrefixName,OCTET,read-create,,current,,Route map tag
.1.3.6.1.4.1.11863.6.76.1.1.1.1.2,TPLINK-ROUTEMAP-MIB::tpIpPrefixMode,INTEGER,read-create,,current,permit(1):deny(2),Permit or deny set actions
.1.3.6.1.4.1.11863.6.76.1.1.1.1.3,TPLINK-ROUTEMAP-MIB::tpIpPrefixSeq,INTEGER,read-create,,current,,Sequence to insert to/delete from existing route-map entry
.1.3.6.1.4.1.11863.6.76.1.1.1.1.4,TPLINK-ROUTEMAP-MIB::tpNetwork,OCTET,read-create,,current,,The internet network address to match (e.g. 192.168.0.0/24).
.1.3.6.1.4.1.11863.6.76.1.1.1.1.5,TPLINK-ROUTEMAP-MIB::tpMaskGe,INTEGER,read-create,,current,,The minimum subnet mask length to match.
.1.3.6.1.4.1.11863.6.76.1.1.1.1.6,TPLINK-ROUTEMAP-MIB::tpMaskLe,INTEGER,read-create,,current,,The maximum subnet length to match.
.1.3.6.1.4.1.11863.6.76.1.1.1.1.7,TPLINK-ROUTEMAP-MIB::tpIpPrefixItemStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),
.1.3.6.1.4.1.11863.6.76.1.2,TPLINK-ROUTEMAP-MIB::tpRouteMapConfig,,,,,,
.1.3.6.1.4.1.11863.6.76.1.2.1,TPLINK-ROUTEMAP-MIB::tpRouteMapConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.11863.6.76.1.2.1.1,TPLINK-ROUTEMAP-MIB::tpRouteMapConfigEntry,,not-accessible,tpRouteMapName:tpRuleId,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.76.1.2.1.1.1,TPLINK-ROUTEMAP-MIB::tpRouteMapName,OCTET,read-only,,current,,Route map tag
.1.3.6.1.4.1.11863.6.76.1.2.1.1.2,TPLINK-ROUTEMAP-MIB::tpConfigMode,INTEGER,read-create,,current,permit(1):deny(2),Permit or deny set actions
.1.3.6.1.4.1.11863.6.76.1.2.1.1.3,TPLINK-ROUTEMAP-MIB::tpRuleId,INTEGER,read-only,,current,,Route map rule Id
.1.3.6.1.4.1.11863.6.76.1.2.1.1.4,TPLINK-ROUTEMAP-MIB::tpConfigItemStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),
.1.3.6.1.4.1.11863.6.76.1.2.2,TPLINK-ROUTEMAP-MIB::tpRouteMapMatchConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.11863.6.76.1.2.2.1,TPLINK-ROUTEMAP-MIB::tpRouteMapMatchConfigEntry,,not-accessible,tpRouteMapName:tpRuleId,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.76.1.2.2.1.1,TPLINK-ROUTEMAP-MIB::tpMatchMode,INTEGER,read-only,,current,permit(1):deny(2),Permit or deny set actions
.1.3.6.1.4.1.11863.6.76.1.2.2.1.2,TPLINK-ROUTEMAP-MIB::tpSIPAcl,OCTET,read-create,,current,,Route map source IP match condition defined by ACL.
.1.3.6.1.4.1.11863.6.76.1.2.2.1.3,TPLINK-ROUTEMAP-MIB::tpSIPPrefixList,OCTET,read-create,,current,,Route map source IP match condition defined by IP Prefix-List.
.1.3.6.1.4.1.11863.6.76.1.2.2.1.4,TPLINK-ROUTEMAP-MIB::tpDIPAcl,OCTET,read-create,,current,,Route map destination IP match condition defined by ACL.
.1.3.6.1.4.1.11863.6.76.1.2.2.1.5,TPLINK-ROUTEMAP-MIB::tpDIPPrefixList,OCTET,read-create,,current,,Route map destination IP match condition defined by IP Prefix-List.
.1.3.6.1.4.1.11863.6.76.1.2.2.1.6,TPLINK-ROUTEMAP-MIB::tpNXPAcl,OCTET,read-create,,current,,Route map nexthop IP match condition defined by ACL.
.1.3.6.1.4.1.11863.6.76.1.2.2.1.7,TPLINK-ROUTEMAP-MIB::tpNXPPrefixList,OCTET,read-create,,current,,Route map nexthop IP match condition defined by IP Prefix-List.
.1.3.6.1.4.1.11863.6.76.1.2.2.1.8,TPLINK-ROUTEMAP-MIB::tpMatchMetric,INTEGER,read-create,,current,,Route map metric match condition.
.1.3.6.1.4.1.11863.6.76.1.2.2.1.9,TPLINK-ROUTEMAP-MIB::tpMatchItemStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),
.1.3.6.1.4.1.11863.6.76.1.2.3,TPLINK-ROUTEMAP-MIB::tpRouteMapSetConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.11863.6.76.1.2.3.1,TPLINK-ROUTEMAP-MIB::tpRouteMapSetConfigEntry,,not-accessible,tpRouteMapName:tpRuleId,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.76.1.2.3.1.1,TPLINK-ROUTEMAP-MIB::tpSetMode,INTEGER,read-only,,current,permit(1):deny(2),Permit or deny set actions
.1.3.6.1.4.1.11863.6.76.1.2.3.1.2,TPLINK-ROUTEMAP-MIB::tpSetMetric,INTEGER,read-create,,current,,Set metric for the matched
.1.3.6.1.4.1.11863.6.76.1.2.3.1.3,TPLINK-ROUTEMAP-MIB::tpSetNexthop,IpAddress,read-create,,current,,Set nexthop for the matched
.1.3.6.1.4.1.11863.6.76.1.2.3.1.4,TPLINK-ROUTEMAP-MIB::tpSetItemStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),
.1.3.6.1.4.1.11863.6.76.1.3,TPLINK-ROUTEMAP-MIB::tpRouteMapBindConfig,,,,,,
.1.3.6.1.4.1.11863.6.76.1.3.1,TPLINK-ROUTEMAP-MIB::tpRouteMapBindConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.11863.6.76.1.3.1.1,TPLINK-ROUTEMAP-MIB::tpRouteMapBindConfigEntry,,not-accessible,tpRouteMapBindName:tpBindVid,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.76.1.3.1.1.1,TPLINK-ROUTEMAP-MIB::tpRouteMapBindName,OCTET,read-only,,current,,Route map tag
.1.3.6.1.4.1.11863.6.76.1.3.1.1.2,TPLINK-ROUTEMAP-MIB::tpBindVid,INTEGER,read-create,,current,,Route map binding vlan id
.1.3.6.1.4.1.11863.6.76.1.3.1.1.3,TPLINK-ROUTEMAP-MIB::tpBindItemStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),
.1.3.6.1.4.1.11863.6.76.2,TPLINK-ROUTEMAP-MIB::tplinkRouteMapNotifications,,,,,,
.1.3.6.1.4.1.11863.6.77,TPLINK-PIM-MIB::tplinkPimMIB,,,,,,Private MIB for PIM configuration.
.1.3.6.1.4.1.11863.6.77.1,TPLINK-PIM-MIB::tplinkPimMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.77.1.1,TPLINK-PIM-MIB::tpPim,,,,,,
.1.3.6.1.4.1.11863.6.77.1.1.1,TPLINK-PIM-MIB::tpSGExpiryTimer,Integer32,read-write,,current,,Specify the expiry timer for the entry.
.1.3.6.1.4.1.11863.6.77.1.1.2,TPLINK-PIM-MIB::tpPimdataThresholdRate,INTEGER,read-write,,current,zero(0):infinity(1),Select rate which the last-hop router will switch to a source-specific shortest path tree. Specify infinity if you want all sources for the specified group to use the shared tree, never switching to the source tree.The default is 0 kbps. 
.1.3.6.1.4.1.11863.6.77.1.1.3,TPLINK-PIM-MIB::tpPimInterfaceTable,,not-accessible,,current,,The (conceptual) table listing the router's PIM interfaces.
.1.3.6.1.4.1.11863.6.77.1.1.3.1,TPLINK-PIM-MIB::tpPimInterfaceEntry,,not-accessible,tpPimInterfaceIndex,current,,An entry (conceptual row) in the pimInterfaceTable.
.1.3.6.1.4.1.11863.6.77.1.1.3.1.1,TPLINK-PIM-MIB::tpPimInterface,OCTET,read-only,,current,, Display the interface which you can configure.
.1.3.6.1.4.1.11863.6.77.1.1.3.1.2,TPLINK-PIM-MIB::tpPimInterfaceIndex,Integer32,read-only,,current,,The Index value of this PIM interface.
.1.3.6.1.4.1.11863.6.77.1.1.3.1.3,TPLINK-PIM-MIB::tpPimInterfaceType,INTEGER,read-only,,current,vlan(0):loopback(1):routeport(2),The configured type of this interface.
.1.3.6.1.4.1.11863.6.77.1.1.3.1.4,TPLINK-PIM-MIB::tpPimInterfaceAddress,IpAddress,read-only,,current,,The IP address of the PIM interface.
.1.3.6.1.4.1.11863.6.77.1.1.3.1.5,TPLINK-PIM-MIB::tpPimInterfaceNetMask,IpAddress,read-only,,current,,The network mask for the IP address of the PIM interface.
.1.3.6.1.4.1.11863.6.77.1.1.3.1.6,TPLINK-PIM-MIB::tpPimInterfaceMode,INTEGER,read-write,,current,disable(0):dense(1):sparse(2),The configured mode of this PIM interface.
.1.3.6.1.4.1.11863.6.77.1.1.3.1.7,TPLINK-PIM-MIB::tpPimInterfaceDRPriority,INTEGER,read-write,,current,,The Designated Router Priority value inserted into the 
.1.3.6.1.4.1.11863.6.77.1.1.3.1.8,TPLINK-PIM-MIB::tpPimInterfaceDRAddress,IpAddress,read-only,,current,,The Designated Router on this PIM interface. For point-
.1.3.6.1.4.1.11863.6.77.1.1.3.1.9,TPLINK-PIM-MIB::tpPimInterfaceHelloInterval,Integer32,read-write,,current,,The frequency at which PIM Hello messages are transmitted
.1.3.6.1.4.1.11863.6.77.1.1.3.1.10,TPLINK-PIM-MIB::tpPimInterfaceBsrBorder,INTEGER,read-write,,current,disable(0):enable(1),The frequency at which PIM Hello messages are transmitted
.1.3.6.1.4.1.11863.6.77.1.1.3.1.11,TPLINK-PIM-MIB::tpPimInterfaceJoinPruneInterval,Integer32,read-write,,current,,The frequency at which PIM Join/Prune messages are transmitted 
.1.3.6.1.4.1.11863.6.77.1.1.4,TPLINK-PIM-MIB::tpPimNeighborTable,,not-accessible,,current,,The (conceptual) table listing the router's PIM neighbors.
.1.3.6.1.4.1.11863.6.77.1.1.4.1,TPLINK-PIM-MIB::tpPimNeighborEntry,,not-accessible,tpPimNeighborAddress,current,,An entry (conceptual row) in the pimNeighborTable.
.1.3.6.1.4.1.11863.6.77.1.1.4.1.1,TPLINK-PIM-MIB::tpPimNeighborInterface,OCTET,read-only,,current,,The interface used to reach this PIM neighbor.
.1.3.6.1.4.1.11863.6.77.1.1.4.1.2,TPLINK-PIM-MIB::tpPimNeighborInterfaceIndex,Integer32,read-only,,current,,The value of ifIndex for the interface used to reach this
.1.3.6.1.4.1.11863.6.77.1.1.4.1.3,TPLINK-PIM-MIB::tpPimNeighborAddress,IpAddress,read-only,,current,,The IP address of the PIM neighbor for which this entry
.1.3.6.1.4.1.11863.6.77.1.1.4.1.4,TPLINK-PIM-MIB::tpPimNeighborUpTime,TimeTicks,read-only,,current,,The time since this PIM neighbor (last) became a neighbor
.1.3.6.1.4.1.11863.6.77.1.1.4.1.5,TPLINK-PIM-MIB::tpPimNeighborExpiryTime,TimeTicks,read-only,,current,,The minimum time remaining before this PIM neighbor will be
.1.3.6.1.4.1.11863.6.77.1.1.4.1.6,TPLINK-PIM-MIB::tpPimNeighborMode,INTEGER,read-only,,deprecated,dense(1):sparse(2),The active PIM mode of this neighbor. This object is
.1.3.6.1.4.1.11863.6.77.1.1.5,TPLINK-PIM-MIB::tpPimCandidateBSRSet,,,,,,
.1.3.6.1.4.1.11863.6.77.1.1.5.1,TPLINK-PIM-MIB::tpPimCBSRInterface,OCTET,read-only,,current,,Specify the interface of the BSR. 
.1.3.6.1.4.1.11863.6.77.1.1.5.2,TPLINK-PIM-MIB::tpPimCBSRInterfaceIndex,Integer32,read-write,,current,,Specify the interface index of the BSR. 
.1.3.6.1.4.1.11863.6.77.1.1.5.3,TPLINK-PIM-MIB::tpPimCBSRHashMaskLength,Integer32,read-write,,current,,Specify the hash mask length of the BSR. The default value is 30. 
.1.3.6.1.4.1.11863.6.77.1.1.5.4,TPLINK-PIM-MIB::tpPimCBSRPriority,Integer32,read-write,,current,,Specify the priority of the BSR. The default value is 64. 
.1.3.6.1.4.1.11863.6.77.1.1.6,TPLINK-PIM-MIB::tpPimStaticRpSet,,,,,,
.1.3.6.1.4.1.11863.6.77.1.1.6.1,TPLINK-PIM-MIB::tpPimStaticRpAddress,IpAddress,read-write,,current,,Specify the static RP address. 
.1.3.6.1.4.1.11863.6.77.1.1.6.2,TPLINK-PIM-MIB::tpPimStaticRpOverride,INTEGER,read-write,,current,disable(0):enable(1), Select to enable or disable override mode. 
.1.3.6.1.4.1.11863.6.77.1.1.7,TPLINK-PIM-MIB::tpPimCandidateRPSetTable,,not-accessible,,current,,The (conceptual) table listing PIM information for
.1.3.6.1.4.1.11863.6.77.1.1.7.1,TPLINK-PIM-MIB::tpPimCandidateRPSetEntry,,not-accessible,tpPimCRPSetInterfaceIndex,current,,An entry (conceptual row) in the pimRPSetTable.
.1.3.6.1.4.1.11863.6.77.1.1.7.1.1,TPLINK-PIM-MIB::tpPimCRPSetInterface,OCTET,read-only,,current,, The c rp interface.
.1.3.6.1.4.1.11863.6.77.1.1.7.1.2,TPLINK-PIM-MIB::tpPimCRPSetInterfaceIndex,Integer32,read-write,,current,,The ifIndex value of this c rp interface.
.1.3.6.1.4.1.11863.6.77.1.1.7.1.3,TPLINK-PIM-MIB::tpPimCRPSetInterfaceType,INTEGER,read-only,,deprecated,vlan(0):loopback(1):routeport(2),The interface type.
.1.3.6.1.4.1.11863.6.77.1.1.7.1.4,TPLINK-PIM-MIB::tpPimCRPSetPriority,Integer32,read-write,,current,,Specify the priority of the candidate RP. The default value is 192. 
.1.3.6.1.4.1.11863.6.77.1.1.7.1.5,TPLINK-PIM-MIB::tpPimCRPSetInterVal,Integer32,read-write,,current,,Specify the interval of advertisement message of the candidate RP in seconds. The default value is 60. 
.1.3.6.1.4.1.11863.6.77.1.1.7.1.6,TPLINK-PIM-MIB::tpPimCRPSetNextAdvertisementTime,TimeTicks,read-only,,current,,Show the remain time of next RP advertisement packet send. 
.1.3.6.1.4.1.11863.6.77.1.1.7.1.7,TPLINK-PIM-MIB::tpPimCRPSetInterfaceStatus,INTEGER,read-write,,deprecated,disable(0):enable(1),The interface type.
.1.3.6.1.4.1.11863.6.77.1.1.8,TPLINK-PIM-MIB::tpPimRPMappingTable,,not-accessible,,deprecated,,Show the RP mapping information. 
.1.3.6.1.4.1.11863.6.77.1.1.8.1,TPLINK-PIM-MIB::tpPimRPMappingEntry,,not-accessible,tpPimRPGroupAddress:tpPimRPAddress,deprecated,,An entry (conceptual row) in the tpPimRPMappingTable. There is one
.1.3.6.1.4.1.11863.6.77.1.1.8.1.1,TPLINK-PIM-MIB::tpPimRPGroupAddress,IpAddress,read-only,,deprecated,,The IP multicast group address for which this entry
.1.3.6.1.4.1.11863.6.77.1.1.8.1.2,TPLINK-PIM-MIB::tpPimRPAddress,IpAddress,read-only,,deprecated,,The IP multicast group address for which this entry
.1.3.6.1.4.1.11863.6.77.1.1.8.1.3,TPLINK-PIM-MIB::tpPimRPInfoSource,IpAddress,read-only,,deprecated,,The state of the RP.
.1.3.6.1.4.1.11863.6.77.1.1.8.1.4,TPLINK-PIM-MIB::tpPimRPPriority,INTEGER,read-only,,deprecated,,Show the priority of the RP. 
.1.3.6.1.4.1.11863.6.77.1.1.8.1.5,TPLINK-PIM-MIB::tpPimRPHoldTime,TimeTicks,read-only,,deprecated,,Show the holdtime of the RP.
.1.3.6.1.4.1.11863.6.77.1.1.8.1.6,TPLINK-PIM-MIB::tpPimRPExpire,TimeTicks,read-only,,deprecated,,Show the expiry time of the RP. If RP is static, the expiry time will be Never.
.1.3.6.1.4.1.11863.6.77.2,TPLINK-PIM-MIB::tplinkPimNotifications,,,,,,
.1.3.6.1.4.1.11863.6.78,TPLINK-IPMROUTE-MIB::tplinkIpMrouteMIB,,,,,,Private MIB for PIM configuration.
.1.3.6.1.4.1.11863.6.78.1,TPLINK-IPMROUTE-MIB::tplinkIpMrouteMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.78.1.1,TPLINK-IPMROUTE-MIB::tpIpMRoute,,,,,,
.1.3.6.1.4.1.11863.6.78.1.1.1,TPLINK-IPMROUTE-MIB::tpIpMRouteEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Select enable or disable to set the status of Multicast 
.1.3.6.1.4.1.11863.6.78.1.1.2,TPLINK-IPMROUTE-MIB::tpIpMRouteSGTable,,not-accessible,,current,,The (conceptual) table containing multicast routing
.1.3.6.1.4.1.11863.6.78.1.1.2.1,TPLINK-IPMROUTE-MIB::tpIpMRouteSGEntry,,not-accessible,tpIpMRouteSGGroup:tpIpMRouteSGSource,current,,An entry (conceptual row) containing the multicast routing
.1.3.6.1.4.1.11863.6.78.1.1.2.1.1,TPLINK-IPMROUTE-MIB::tpIpMRouteSGGroup,IpAddress,read-only,,current,,The destination group IP address.
.1.3.6.1.4.1.11863.6.78.1.1.2.1.2,TPLINK-IPMROUTE-MIB::tpIpMRouteSGSource,IpAddress,read-only,,current,,The IP address of the multicast packet source to be combined with
.1.3.6.1.4.1.11863.6.78.1.1.2.1.3,TPLINK-IPMROUTE-MIB::tpIpMRouteSGIncomingInterface,OCTET,read-only,,current,,The incoming interface on which multicast packets for this source
.1.3.6.1.4.1.11863.6.78.1.1.2.1.4,TPLINK-IPMROUTE-MIB::tpIpMRouteSGOutgoingInterface,OCTET,read-only,,current,,The list of outgoing interfaces on which multicast packets for this
.1.3.6.1.4.1.11863.6.78.1.1.2.1.5,TPLINK-IPMROUTE-MIB::tpIpMRouteSGRpfNeighbor,IpAddress,read-only,,current,,The address of the upstream neighbor (e.g., RPF neighbor)
.1.3.6.1.4.1.11863.6.78.1.1.2.1.6,TPLINK-IPMROUTE-MIB::tpIpMRouteSGUpTime,TimeTicks,read-only,,current,,The time in seconds since the entry was created.
.1.3.6.1.4.1.11863.6.78.1.1.2.1.7,TPLINK-IPMROUTE-MIB::tpIpMRouteSGExpiryTime,TimeTicks,read-only,,current,,The time in seconds before this entry will age out and be 
.1.3.6.1.4.1.11863.6.78.1.1.2.1.8,TPLINK-IPMROUTE-MIB::tpIpMRouteSGProtocol,INTEGER,read-only,,current,pimDenseMode(1):pimSparseMode(2),The multicast routing protocol which created this entry. The 
.1.3.6.1.4.1.11863.6.78.1.1.2.1.9,TPLINK-IPMROUTE-MIB::tpIpMRouteSGFlags,INTEGER,read-only,,current,spt(1):rpt(2),The value displayed in this field is valid if the multicast routing 
.1.3.6.1.4.1.11863.6.78.1.1.3,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGTable,,not-accessible,,current,,The (conceptual) table containing multicast routing
.1.3.6.1.4.1.11863.6.78.1.1.3.1,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGEntry,,not-accessible,tpIpMRouteStarGGroup,current,,An entry (conceptual row) containing the multicast routing
.1.3.6.1.4.1.11863.6.78.1.1.3.1.1,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGGroup,IpAddress,read-only,,current,,The destination group IP address.
.1.3.6.1.4.1.11863.6.78.1.1.3.1.2,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGSource,IpAddress,read-only,,current,,The IP address of the multicast packet source to be combined with
.1.3.6.1.4.1.11863.6.78.1.1.3.1.3,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGIncomingInterface,OCTET,read-only,,current,,The incoming interface on which multicast packets for this source
.1.3.6.1.4.1.11863.6.78.1.1.3.1.4,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGOutgoingInterface,OCTET,read-only,,current,,The list of outgoing interfaces on which multicast packets for this
.1.3.6.1.4.1.11863.6.78.1.1.3.1.5,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGRpfNeighbor,IpAddress,read-only,,current,,The address of the upstream neighbor (e.g., RPF neighbor)
.1.3.6.1.4.1.11863.6.78.1.1.3.1.6,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGUpTime,TimeTicks,read-only,,current,,The time in seconds since the entry was created.
.1.3.6.1.4.1.11863.6.78.1.1.3.1.7,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGExpiryTime,TimeTicks,read-only,,current,,The time in seconds before this entry will age out and be 
.1.3.6.1.4.1.11863.6.78.1.1.3.1.8,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGProtocol,INTEGER,read-only,,current,pimDenseMode(1):pimSparseMode(2),The multicast routing protocol which created this entry. The 
.1.3.6.1.4.1.11863.6.78.1.1.3.1.9,TPLINK-IPMROUTE-MIB::tpIpMRouteStarGFlags,INTEGER,read-only,,current,spt(1):rpt(2),The value displayed in this field is valid if the multicast routing 
.1.3.6.1.4.1.11863.6.78.2,TPLINK-IPMROUTE-MIB::tplinkIpMrouteNotifications,,,,,,
.1.3.6.1.4.1.11863.6.79,TPLINK-STATICMROUTE-MIB::tplinkStaticMrouteMIB,,,,,,Private MIB for static Mroute configuration.
.1.3.6.1.4.1.11863.6.79.1,TPLINK-STATICMROUTE-MIB::tplinkStaticMrouteMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.79.1.1,TPLINK-STATICMROUTE-MIB::tplinkStaticMrouteConfig,,,,,,
.1.3.6.1.4.1.11863.6.79.1.1.1,TPLINK-STATICMROUTE-MIB::tpStaticMrouteTable,,not-accessible,,current,,Static mroutes are special routes manually configured by the 
.1.3.6.1.4.1.11863.6.79.1.1.1.1,TPLINK-STATICMROUTE-MIB::tpStaticMrouteEntry,,not-accessible,tpStaticMrouteSource:tpStaticMrouteSourceMask,current,,The item can be added or removed .
.1.3.6.1.4.1.11863.6.79.1.1.1.1.1,TPLINK-STATICMROUTE-MIB::tpStaticMrouteSource,IpAddress,read-only,,current,,The IP Address that identifies the multicast source of the entry 
.1.3.6.1.4.1.11863.6.79.1.1.1.1.2,TPLINK-STATICMROUTE-MIB::tpStaticMrouteSourceMask,IpAddress,read-only,,current,,The subnet mask to be applied to the Source.
.1.3.6.1.4.1.11863.6.79.1.1.1.1.3,TPLINK-STATICMROUTE-MIB::tpStaticMrouteRpfNeigbor,IpAddress,read-create,,current,,the IP address of the neighbor router on the path to the mroute 
.1.3.6.1.4.1.11863.6.79.1.1.1.1.4,TPLINK-STATICMROUTE-MIB::tpStaticMrouteDistance,Integer32,read-create,,current,,The link state cost of the path to the multicast source.
.1.3.6.1.4.1.11863.6.79.1.1.1.1.5,TPLINK-STATICMROUTE-MIB::tpStaticMrouteStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6), The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
.1.3.6.1.4.1.11863.6.79.2,TPLINK-STATICMROUTE-MIB::tplinkStaticMrouteNotifications,,,,,,
.1.3.6.1.4.1.11863.6.80,TPLINK-PORTLOOPBACKDETECTION-MIB::tplinkLoopbackDetectionMIB,,,,,,The config of loopback Detection.
.1.3.6.1.4.1.11863.6.80.1,TPLINK-PORTLOOPBACKDETECTION-MIB::tplinkLoopbackDetectionMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.80.1.1,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable LOOPBACK detection function globally on the Switch. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.80.1.2,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionInterval,INTEGER,read-write,,current,,The interval time of loopback detection
.1.3.6.1.4.1.11863.6.80.1.3,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionRecoveryTime,INTEGER,read-write,,current,,The recovery time of loopback detection
.1.3.6.1.4.1.11863.6.80.1.4,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionCtrlTable,,not-accessible,,current,,A list of port loopback detection.
.1.3.6.1.4.1.11863.6.80.1.4.1,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionCtrlEntry,,not-accessible,ifIndex,current,,The entry of the port loopback detection list .
.1.3.6.1.4.1.11863.6.80.1.4.1.1,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionPort,OCTET,read-only,,current,,Display port number
.1.3.6.1.4.1.11863.6.80.1.4.1.2,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionState,INTEGER,read-write,,current,disable(0):enable(1),The state of the port.
.1.3.6.1.4.1.11863.6.80.1.4.1.3,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionProcessMode,INTEGER,read-write,,current,alert(0):portbased(1),The process mode of the port.
.1.3.6.1.4.1.11863.6.80.1.4.1.4,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionRecoverMode,INTEGER,read-write,,current,auto(0):manual(1),The recover mode of the port.
.1.3.6.1.4.1.11863.6.80.1.4.1.5,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionLoopState,OCTET,read-only,,current,,The loop state of the port.
.1.3.6.1.4.1.11863.6.80.1.4.1.6,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionBlockState,OCTET,read-only,,current,,The block state of the port.
.1.3.6.1.4.1.11863.6.80.1.4.1.7,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionLagState,OCTET,read-only,,current,,The LAG of the port.
.1.3.6.1.4.1.11863.6.80.1.4.1.8,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackDetectionRecoverPort,INTEGER,read-write,,current,,You can recover the block port with this.
.1.3.6.1.4.1.11863.6.80.2,TPLINK-PORTLOOPBACKDETECTION-MIB::tplinkLoopbackDetectionNotifications,,,,,,
.1.3.6.1.4.1.11863.6.80.2.1,TPLINK-PORTLOOPBACKDETECTION-MIB::loopbackStatusChange,,,,,,When loopbackDetection is enabled ,A loopback detection notification is sent while port loop status is changed.
.1.3.6.1.4.1.11863.6.81,TPLINK-L2PROTOCOL-TUNNEL-MIB::tplinkL2protocolTunnelMIB,,,,,,The config of layer 2 protocol tunnel.
.1.3.6.1.4.1.11863.6.81.1,TPLINK-L2PROTOCOL-TUNNEL-MIB::tplinkL2protocolTunnelMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.81.1.1,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptGlobalCfg,,,,,,
.1.3.6.1.4.1.11863.6.81.1.1.1,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptEnable,INTEGER,read-write,,current,disable(0):enable(1),Select Enable/Disable l2protocol tunnel function globally on the Switch. 0. disable  1. enable
.1.3.6.1.4.1.11863.6.81.1.2,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptPortCfg,,,,,,
.1.3.6.1.4.1.11863.6.81.1.2.1,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptPortTable,,not-accessible,,current,,A list of port loopback detection.
.1.3.6.1.4.1.11863.6.81.1.2.1.1,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptPortEntry,,not-accessible,ifIndex,current,,The entry of the port l2protocol tunnel list .
.1.3.6.1.4.1.11863.6.81.1.2.1.1.1,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptPort,OCTET,read-only,,current,,Display port number
.1.3.6.1.4.1.11863.6.81.1.2.1.1.2,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptType,INTEGER,read-write,,current,none(0):uni(1):nni(2),The type of the port.
.1.3.6.1.4.1.11863.6.81.1.2.1.1.3,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptProtocol,OCTET,read-write,,current,,The tunnel protocol of the port.
.1.3.6.1.4.1.11863.6.81.1.2.1.1.4,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptThreshold,OCTET,read-write,,current,,Set drop threshold for protocol packets.
.1.3.6.1.4.1.11863.6.81.1.2.1.1.5,TPLINK-L2PROTOCOL-TUNNEL-MIB::tpL2ptLag,OCTET,read-only,,current,,Displays the LAG number which the port belongs to.
.1.3.6.1.4.1.11863.6.81.2,TPLINK-L2PROTOCOL-TUNNEL-MIB::tplinkL2protocolTunnelNotifications,,,,,,
.1.3.6.1.4.1.11863.6.82,TPLINK-AAA-MIB::tplinkAaaMIB,,,,,,Private MIB for aaa configuration.
.1.3.6.1.4.1.11863.6.82.1,TPLINK-AAA-MIB::aaaGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.82.1.1,TPLINK-AAA-MIB::swAaaGlobalEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.82.1.2,TPLINK-AAA-MIB::aaaApplicationList,,,,,,
.1.3.6.1.4.1.11863.6.82.1.2.1,TPLINK-AAA-MIB::aaaApplicationListTable,,not-accessible,,current,,Display the authentication method list the module use.
.1.3.6.1.4.1.11863.6.82.1.2.1.1,TPLINK-AAA-MIB::aaaApplicationListEntry,,not-accessible,moduleId,current,,An entry contains of the information of methodlist the module use.
.1.3.6.1.4.1.11863.6.82.1.2.1.1.1,TPLINK-AAA-MIB::moduleId,INTEGER,read-only,,current,,Display the id of module.
.1.3.6.1.4.1.11863.6.82.1.2.1.1.2,TPLINK-AAA-MIB::moduleName,OCTET,read-only,,current,,Display the name of module.
.1.3.6.1.4.1.11863.6.82.1.2.1.1.3,TPLINK-AAA-MIB::loginList,OCTET,read-write,,current,,Display the login method list that the module use.
.1.3.6.1.4.1.11863.6.82.1.2.1.1.4,TPLINK-AAA-MIB::enableList,OCTET,read-write,,current,,Display the enable method list that the module use.
.1.3.6.1.4.1.11863.6.82.2,TPLINK-AAA-MIB::aaaAuthenticationListConfig,,,,,,
.1.3.6.1.4.1.11863.6.82.2.1,TPLINK-AAA-MIB::authenticationLoginMethodListTable,,not-accessible,,current,,Display the authentication login method list.
.1.3.6.1.4.1.11863.6.82.2.1.1,TPLINK-AAA-MIB::authenticationLoginMethodListEntry,,not-accessible,authenLoginListName,current,,An entry contains of the information of method list.
.1.3.6.1.4.1.11863.6.82.2.1.1.1,TPLINK-AAA-MIB::authenLoginListName,OCTET,read-create,,current,,The name of method list.
.1.3.6.1.4.1.11863.6.82.2.1.1.2,TPLINK-AAA-MIB::authenLoginPri1,OCTET,read-write,,current,,The priority 1 method.
.1.3.6.1.4.1.11863.6.82.2.1.1.3,TPLINK-AAA-MIB::authenLoginPri2,OCTET,read-write,,current,,The priority 2 method.
.1.3.6.1.4.1.11863.6.82.2.1.1.4,TPLINK-AAA-MIB::authenLoginPri3,OCTET,read-write,,current,,The priority 3 method.
.1.3.6.1.4.1.11863.6.82.2.1.1.5,TPLINK-AAA-MIB::authenLoginPri4,OCTET,read-write,,current,,The priority 4 method.
.1.3.6.1.4.1.11863.6.82.2.1.1.6,TPLINK-AAA-MIB::authenLoginStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.82.2.2,TPLINK-AAA-MIB::authenticationEnableMethodListTable,,not-accessible,,current,,Display the authentication enable method list..
.1.3.6.1.4.1.11863.6.82.2.2.1,TPLINK-AAA-MIB::authenticationEnableMethodListEntry,,not-accessible,authenEnableListName,current,,An entry contains of the information of method list.
.1.3.6.1.4.1.11863.6.82.2.2.1.1,TPLINK-AAA-MIB::authenEnableListName,OCTET,read-create,,current,,The name of method list.
.1.3.6.1.4.1.11863.6.82.2.2.1.2,TPLINK-AAA-MIB::authenEnablePri1,OCTET,read-write,,current,,The priority 1 method.
.1.3.6.1.4.1.11863.6.82.2.2.1.3,TPLINK-AAA-MIB::authenEnablePri2,OCTET,read-write,,current,,The priority 2 method.
.1.3.6.1.4.1.11863.6.82.2.2.1.4,TPLINK-AAA-MIB::authenEnablePri3,OCTET,read-write,,current,,The priority 3 method.
.1.3.6.1.4.1.11863.6.82.2.2.1.5,TPLINK-AAA-MIB::authenEnablePri4,OCTET,read-write,,current,,The priority 4 method.
.1.3.6.1.4.1.11863.6.82.2.2.1.6,TPLINK-AAA-MIB::authenEnableStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.82.3,TPLINK-AAA-MIB::aaaDot1xListConfig,,,,,,
.1.3.6.1.4.1.11863.6.82.3.1,TPLINK-AAA-MIB::authenticationDot1xMethodListTable,,not-accessible,,current,,Display the authentication dot1x method list.
.1.3.6.1.4.1.11863.6.82.3.1.1,TPLINK-AAA-MIB::authenticationDot1xMethodListEntry,,not-accessible,authenDot1xListName,current,,An entry contains of the information of method list.
.1.3.6.1.4.1.11863.6.82.3.1.1.1,TPLINK-AAA-MIB::authenDot1xListName,OCTET,read-only,,current,,The name of method list.
.1.3.6.1.4.1.11863.6.82.3.1.1.2,TPLINK-AAA-MIB::authenDot1xPri1,OCTET,read-write,,current,,The priority 1 method.
.1.3.6.1.4.1.11863.6.82.3.1.1.3,TPLINK-AAA-MIB::authenDot1xStatus,INTEGER,read-only,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.82.3.2,TPLINK-AAA-MIB::accountingDot1xMethodListTable,,not-accessible,,current,,Display the accounting dot1x method list.
.1.3.6.1.4.1.11863.6.82.3.2.1,TPLINK-AAA-MIB::accountingDot1xMethodListEntry,,not-accessible,acctDot1xListName,current,,An entry contains of the information of method list.
.1.3.6.1.4.1.11863.6.82.3.2.1.1,TPLINK-AAA-MIB::acctDot1xListName,OCTET,read-only,,current,,The name of method list.
.1.3.6.1.4.1.11863.6.82.3.2.1.2,TPLINK-AAA-MIB::acctDot1xPri1,OCTET,read-write,,current,,The priority 1 method.
.1.3.6.1.4.1.11863.6.82.3.2.1.3,TPLINK-AAA-MIB::acctDot1xStatus,INTEGER,read-only,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.82.4,TPLINK-AAA-MIB::radiusDeamonTable,,not-accessible,,current,,RADIUS DEAMON is a server
.1.3.6.1.4.1.11863.6.82.4.1,TPLINK-AAA-MIB::radiusDeamonEntry,,not-accessible,radiusDeamonServerIp,current,,An entry contains of the information of a radius deamon.
.1.3.6.1.4.1.11863.6.82.4.1.1,TPLINK-AAA-MIB::radiusDeamonServerIp,IpAddress,read-create,,current,,Enter the IP address of the RADIUS server.
.1.3.6.1.4.1.11863.6.82.4.1.2,TPLINK-AAA-MIB::radiusDeamonTimeout,INTEGER,read-create,,current,,Enter the number of seconds the switch waits for a 
.1.3.6.1.4.1.11863.6.82.4.1.3,TPLINK-AAA-MIB::radiusDeamonRetransimit,INTEGER,read-create,,current,,Enter the number of times the switch will resend an 
.1.3.6.1.4.1.11863.6.82.4.1.4,TPLINK-AAA-MIB::radiusDeamonKey,OCTET,read-create,,current,,Enter the encryption key used to authenticate logon 
.1.3.6.1.4.1.11863.6.82.4.1.5,TPLINK-AAA-MIB::radiusDeamonAuthPort,INTEGER,read-create,,current,,Enter the radius server port used for sending 
.1.3.6.1.4.1.11863.6.82.4.1.6,TPLINK-AAA-MIB::radiusDeamonAcctPort,INTEGER,read-create,,current,,Enter the radius server port used for sending 
.1.3.6.1.4.1.11863.6.82.4.1.7,TPLINK-AAA-MIB::radiusDeamonStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.82.5,TPLINK-AAA-MIB::tacacsDeamonTable,,not-accessible,,current,,TACACS(Terminal Access Controller Access Control System) DEAMON is a server
.1.3.6.1.4.1.11863.6.82.5.1,TPLINK-AAA-MIB::tacacsDeamonEntry,,not-accessible,tacacsDeamonServerIp,current,,An entry contains of the information of a tacacs deamon.
.1.3.6.1.4.1.11863.6.82.5.1.1,TPLINK-AAA-MIB::tacacsDeamonServerIp,IpAddress,read-create,,current,,Enter the IP address of the TACACS+ server.
.1.3.6.1.4.1.11863.6.82.5.1.2,TPLINK-AAA-MIB::tacacsDeamonTimeout,INTEGER,read-create,,current,,Enter the number of seconds the switch waits for a 
.1.3.6.1.4.1.11863.6.82.5.1.3,TPLINK-AAA-MIB::tacacsDeamonKey,OCTET,read-create,,current,,Enter the encryption key used to authenticate logon 
.1.3.6.1.4.1.11863.6.82.5.1.4,TPLINK-AAA-MIB::tacacsDeamonPort,INTEGER,read-create,,current,,Enter the tacacs+ server port used for sending 
.1.3.6.1.4.1.11863.6.82.5.1.5,TPLINK-AAA-MIB::tacacsDeamonStatus,INTEGER,read-create,,current,active(1):createAndGo(4):destroy(6),the following two values are states:
.1.3.6.1.4.1.11863.6.90,TPLINK-SDM-MIB::tplinkSDMMIB,,,,,,Private MIB for SDM configuration.
.1.3.6.1.4.1.11863.6.90.1,TPLINK-SDM-MIB::tplinkSDMMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.90.1.1,TPLINK-SDM-MIB::sdmTemLayOutTable,,not-accessible,,current,,Display the layout of templates.
.1.3.6.1.4.1.11863.6.90.1.1.1,TPLINK-SDM-MIB::sdmTemLayOutEntry,,not-accessible,sdmTemName,current,,An entry contains of the layout of some template.
.1.3.6.1.4.1.11863.6.90.1.1.1.2,TPLINK-SDM-MIB::sdmTemName,OCTET,read-only,,current,,Display the name of templates.
.1.3.6.1.4.1.11863.6.90.1.1.1.3,TPLINK-SDM-MIB::ipAclRuleNum,INTEGER,read-only,,current,,Display the number of TCAM entries for IP ACL Rules, which include Lay3 ACL Rules and Lay4 ACL Rules.
.1.3.6.1.4.1.11863.6.90.1.1.1.4,TPLINK-SDM-MIB::macAclRuleNum,INTEGER,read-only,,current,,Display the number of TCAM entries for Lay2 ACL Rules.
.1.3.6.1.4.1.11863.6.90.1.1.1.5,TPLINK-SDM-MIB::combinedAclRuleNum,INTEGER,read-only,,current,,Display the number of TCAM entries for Combined ACL Rules.
.1.3.6.1.4.1.11863.6.90.1.1.1.6,TPLINK-SDM-MIB::ipv6AclRuleNum,INTEGER,read-only,,current,,Display the number of TCAM entries for IPv6 ACL Rules.
.1.3.6.1.4.1.11863.6.90.1.1.1.7,TPLINK-SDM-MIB::arpDetectionNum,INTEGER,read-only,,current,,Display the number of TCAM entries for Arp defend.
.1.3.6.1.4.1.11863.6.90.1.1.1.8,TPLINK-SDM-MIB::v6SourceNum,INTEGER,read-only,,current,,Display the number of TCAM entries for IPV6 Source Guard.
.1.3.6.1.4.1.11863.6.90.1.2,TPLINK-SDM-MIB::sdmCurTemName,OCTET,read-only,,current,,Display the template currently in effect.
.1.3.6.1.4.1.11863.6.90.1.3,TPLINK-SDM-MIB::sdmNextTemID,INTEGER,read-write,,current,default(0):enterpriseV4(1):enterpriseV6(2),Select a template which will take effect after reboot the switch.
.1.3.6.1.4.1.11863.6.90.2,TPLINK-SDM-MIB::tplinkSDMNotifications,,,,,,
.1.3.6.1.4.1.11863.6.91,TPLINK-DHCP6SNOOPING-MIB::tplinkDhcp6SnoopingMIB,,,,,,Private MIB for DHCPv6 Snooping configuration.
.1.3.6.1.4.1.11863.6.91.1,TPLINK-DHCP6SNOOPING-MIB::tplinkDhcp6SnoopingMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.91.1.1,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.91.1.1.1,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.91.1.1.2,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingVlanConfigTable,,not-accessible,,current,,Here you can view and modify the DHCPv6 Snooping VLAN config table.
.1.3.6.1.4.1.11863.6.91.1.1.2.1,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingVlanConfigEntry,,not-accessible,dhcp6SnoopingVlanId,current,,An entry contains of the DHCPv6 Snooping function enable status information of a VLAN.
.1.3.6.1.4.1.11863.6.91.1.1.2.1.1,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingVlanId,INTEGER,read-create,,current,,Enter the ID number of VLAN,1-4094.
.1.3.6.1.4.1.11863.6.91.1.1.2.1.2,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingVlanStatus,INTEGER,read-create,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.91.1.3,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.91.1.3.1,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingPortConfigTable,,not-accessible,,current,,A list of DHCPv6 Snooping port config entries. Here you can configure the port parameters for the DHCPv6 Snooping.
.1.3.6.1.4.1.11863.6.91.1.3.1.1,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingPortConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of DHCPv6 Snooping port config.
.1.3.6.1.4.1.11863.6.91.1.3.1.1.1,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingPort,OCTET,read-only,,current,,Display port number
.1.3.6.1.4.1.11863.6.91.1.3.1.1.2,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingPortConfigTrustedPort,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1. enable Select Enable/Disable the port to be a Trusted Port.  Only the Trusted Port can receive the DHCPv6 packets from DHCPv6 servers.
.1.3.6.1.4.1.11863.6.91.1.3.1.1.3,TPLINK-DHCP6SNOOPING-MIB::dhcp6SnoopingPortConfigPortLag,OCTET,read-only,,current,,The LAG to which the port belongs to.
.1.3.6.1.4.1.11863.6.91.2,TPLINK-DHCP6SNOOPING-MIB::tplinkDhcp6SnoopingNotifications,,,,,,
.1.3.6.1.4.1.11863.6.92,TPLINK-NDSNOOPING-MIB::tplinkNdSnoopingMIB,,,,,,Private MIB for ND Snooping configuration.
.1.3.6.1.4.1.11863.6.92.1,TPLINK-NDSNOOPING-MIB::tplinkNdSnoopingMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.92.1.1,TPLINK-NDSNOOPING-MIB::ndSnoopingGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.92.1.1.1,TPLINK-NDSNOOPING-MIB::ndSnoopingEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.92.1.1.2,TPLINK-NDSNOOPING-MIB::ndSnoopingVlanConfigTable,,not-accessible,,current,,Here you can view and modify the ND Snooping VLAN config table.
.1.3.6.1.4.1.11863.6.92.1.1.2.1,TPLINK-NDSNOOPING-MIB::ndSnoopingVlanConfigEntry,,not-accessible,ndSnoopingVlanId,current,,An entry contains of the ND Snooping function enable status information of a VLAN.
.1.3.6.1.4.1.11863.6.92.1.1.2.1.1,TPLINK-NDSNOOPING-MIB::ndSnoopingVlanId,INTEGER,read-create,,current,,Enter the ID number of VLAN,1-4094.
.1.3.6.1.4.1.11863.6.92.1.1.2.1.2,TPLINK-NDSNOOPING-MIB::ndSnoopingVlanStatus,INTEGER,read-create,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.92.1.3,TPLINK-NDSNOOPING-MIB::ndSnoopingPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.92.1.3.1,TPLINK-NDSNOOPING-MIB::ndSnoopingPortConfigTable,,not-accessible,,current,,A list of ND Snooping port config entries. Here you can configure the port parameters for the ND Snooping.
.1.3.6.1.4.1.11863.6.92.1.3.1.1,TPLINK-NDSNOOPING-MIB::ndSnoopingPortConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of ND Snooping port config.
.1.3.6.1.4.1.11863.6.92.1.3.1.1.1,TPLINK-NDSNOOPING-MIB::ndSnoopingPort,OCTET,read-only,,current,,Display port number
.1.3.6.1.4.1.11863.6.92.1.3.1.1.2,TPLINK-NDSNOOPING-MIB::ndSnoopingPortConfigMaxEntry,INTEGER,read-write,,current,,Set the maxinum entry of the interface.
.1.3.6.1.4.1.11863.6.92.1.3.1.1.3,TPLINK-NDSNOOPING-MIB::ndSnoopingPortConfigPortLag,OCTET,read-only,,current,,The LAG to which the port belongs to.
.1.3.6.1.4.1.11863.6.92.2,TPLINK-NDSNOOPING-MIB::tplinkNdSnoopingNotifications,,,,,,
.1.3.6.1.4.1.11863.6.93,TPLINK-NDDETECTION-MIB::tplinkNdDetectionMIB,,,,,,Private MIB for ND Detection configuration.
.1.3.6.1.4.1.11863.6.93.1,TPLINK-NDDETECTION-MIB::tplinkNdDetectionMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.93.1.1,TPLINK-NDDETECTION-MIB::ndDetectionGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.93.1.1.1,TPLINK-NDDETECTION-MIB::ndDetectionEnable,INTEGER,read-write,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.93.1.1.2,TPLINK-NDDETECTION-MIB::ndDetectionVlanConfigTable,,not-accessible,,current,,Here you can view and modify the ND Detection VLAN config table.
.1.3.6.1.4.1.11863.6.93.1.1.2.1,TPLINK-NDDETECTION-MIB::ndDetectionVlanConfigEntry,,not-accessible,ndDetectionVlanId,current,,An entry contains of the ND Detection function enable status information of a VLAN.
.1.3.6.1.4.1.11863.6.93.1.1.2.1.1,TPLINK-NDDETECTION-MIB::ndDetectionVlanId,INTEGER,read-create,,current,,Enter the ID number of VLAN,1-4094.
.1.3.6.1.4.1.11863.6.93.1.1.2.1.2,TPLINK-NDDETECTION-MIB::ndDetectionVlanStatus,INTEGER,read-create,,current,disable(0):enable(1),0. disable 
.1.3.6.1.4.1.11863.6.93.1.3,TPLINK-NDDETECTION-MIB::ndDetectionPortConfig,,,,,,
.1.3.6.1.4.1.11863.6.93.1.3.1,TPLINK-NDDETECTION-MIB::ndDetectionPortConfigTable,,not-accessible,,current,,A list of ND Detection port config entries. Here you can configure the port parameters for the ND Detection.
.1.3.6.1.4.1.11863.6.93.1.3.1.1,TPLINK-NDDETECTION-MIB::ndDetectionPortConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of ND Detection port config.
.1.3.6.1.4.1.11863.6.93.1.3.1.1.1,TPLINK-NDDETECTION-MIB::ndDetectionPort,OCTET,read-only,,current,,Display port number
.1.3.6.1.4.1.11863.6.93.1.3.1.1.2,TPLINK-NDDETECTION-MIB::ndDetectionPortConfigTrustedPort,INTEGER,read-write,,current,disable(0):enable(1),0. disable 1. enable Select Enable/Disable the port to be a Trusted Port.  Only the Trusted Port can forward the Router Advertisement Message and Router Redirect Message from Routers.
.1.3.6.1.4.1.11863.6.93.1.3.1.1.3,TPLINK-NDDETECTION-MIB::ndDetectionPortConfigPortLag,OCTET,read-only,,current,,The LAG to which the port belongs to.
.1.3.6.1.4.1.11863.6.93.2,TPLINK-NDDETECTION-MIB::tplinkNdDetectionNotifications,,,,,,
.1.3.6.1.4.1.11863.6.94,TPLINK-IPV6-SOURCE-GUARD-MIB::tplinkIpv6SourceGuardMIB,,,,,,Private MIB for IPv6 source guard configuration.
.1.3.6.1.4.1.11863.6.94.1,TPLINK-IPV6-SOURCE-GUARD-MIB::tplinkIpv6SourceGuardMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.94.1.1,TPLINK-IPV6-SOURCE-GUARD-MIB::tpIpv6SourceGuardConfig,,,,,,
.1.3.6.1.4.1.11863.6.94.1.1.1,TPLINK-IPV6-SOURCE-GUARD-MIB::tpIpv6SourceGuardConfigTable,,not-accessible,,current,,A list of IPv6 source guard config entries. Here you can configure the IPv6 Source Guard feature.
.1.3.6.1.4.1.11863.6.94.1.1.1.1,TPLINK-IPV6-SOURCE-GUARD-MIB::tpIpv6SourceGuardConfigEntry,,not-accessible,ifIndex,current,,An entry contains of the information of IPv6 source guard config.
.1.3.6.1.4.1.11863.6.94.1.1.1.1.1,TPLINK-IPV6-SOURCE-GUARD-MIB::tpIpv6SourceGuardConfigPort,OCTET,read-only,,current,,port number
.1.3.6.1.4.1.11863.6.94.1.1.1.1.2,TPLINK-IPV6-SOURCE-GUARD-MIB::tpIpv6SourceGuardConfigType,INTEGER,read-write,,current,disable(0):sipv6-mac(2),Select Security Type for the port. 0. disable: Select this option to disable the IPv6 Source Guard feature for the port. 1. SIPv6: Only the packets with its source IPv6 address and port number matched  to the IPv6-MAC binding rules can be processed.  2. SIPv6+MAC: Only the packets with its source IPv6 address,  source MAC address and port number matched to the IPv6-MAC binding rules can be processed.
.1.3.6.1.4.1.11863.6.94.1.1.1.1.3,TPLINK-IPV6-SOURCE-GUARD-MIB::tpIpv6SourceGuardConfigPortLag,OCTET,read-only,,current,,the lag the port belong to
.1.3.6.1.4.1.11863.6.94.2,TPLINK-IPV6-SOURCE-GUARD-MIB::tplinkIpv6SourceGuardNotifications,,,,,,
.1.3.6.1.4.1.11863.6.95,TPLINK-SFLOW-MIB::tplinkSflowMIB,,,,,,Private MIB for the sFlow configuration.
.1.3.6.1.4.1.11863.6.95.1,TPLINK-SFLOW-MIB::tplinkSflowMIBObjects,,,,,,
.1.3.6.1.4.1.11863.6.95.1.1,TPLINK-SFLOW-MIB::tpSflowGlobalConfig,,,,,,
.1.3.6.1.4.1.11863.6.95.1.1.1,TPLINK-SFLOW-MIB::tpSflowGlobalConfigStatus,INTEGER,read-write,,current,disable(0):enable(1),Allows you to Enable/Disable the sFlow function. 
.1.3.6.1.4.1.11863.6.95.1.1.2,TPLINK-SFLOW-MIB::tpSflowGlobalConfigAddress,IpAddress,read-write,,current,,The IP address of the agent.
.1.3.6.1.4.1.11863.6.95.1.1.3,TPLINK-SFLOW-MIB::tpSflowGlobalConfigVersion,INTEGER,read-only,,current,,The sFlow version number.
.1.3.6.1.4.1.11863.6.95.1.2,TPLINK-SFLOW-MIB::tpSflowCollector,,,,,,
.1.3.6.1.4.1.11863.6.95.1.2.1,TPLINK-SFLOW-MIB::tpSflowCollectorTable,,not-accessible,,current,,A list of sflow collector entries. Here you can configure the sflow collector.
.1.3.6.1.4.1.11863.6.95.1.2.1.1,TPLINK-SFLOW-MIB::tpSflowCollectorEntry,,not-accessible,tpSflowCollectorCollectorId,current,,An entry contains the information of sflow collector.
.1.3.6.1.4.1.11863.6.95.1.2.1.1.1,TPLINK-SFLOW-MIB::tpSflowCollectorCollectorId,INTEGER,read-only,,current,,The collector ID.
.1.3.6.1.4.1.11863.6.95.1.2.1.1.2,TPLINK-SFLOW-MIB::tpSflowCollectorDescription,OCTET,read-write,,current,,This description of the collector.
.1.3.6.1.4.1.11863.6.95.1.2.1.1.3,TPLINK-SFLOW-MIB::tpSflowCollectorCollectorIp,IpAddress,read-write,,current,,The IP address of the collector
.1.3.6.1.4.1.11863.6.95.1.2.1.1.4,TPLINK-SFLOW-MIB::tpSflowCollectorCollectorPort,INTEGER,read-write,,current,,The UDP port of the collector.
.1.3.6.1.4.1.11863.6.95.1.2.1.1.5,TPLINK-SFLOW-MIB::tpSflowCollectorMaxDatagram,INTEGER,read-write,,current,,The max datagram of the collector.
.1.3.6.1.4.1.11863.6.95.1.2.1.1.6,TPLINK-SFLOW-MIB::tpSflowCollectorTimeout,INTEGER,read-write,,current,,The timeout value of the collector.
.1.3.6.1.4.1.11863.6.95.1.2.1.1.7,TPLINK-SFLOW-MIB::tpSflowCollectorLifetime,INTEGER,read-only,,current,,The lifetime of the collector.
.1.3.6.1.4.1.11863.6.95.1.3,TPLINK-SFLOW-MIB::tpSflowSampler,,,,,,
.1.3.6.1.4.1.11863.6.95.1.3.1,TPLINK-SFLOW-MIB::tpSflowSamplerTable,,not-accessible,,current,,A list of sflow sampler entries. Here you can configure the sflow sampler.
.1.3.6.1.4.1.11863.6.95.1.3.1.1,TPLINK-SFLOW-MIB::tpSflowSamplerEntry,,not-accessible,ifIndex,current,,An entry contains the information of the sflow sampler.
.1.3.6.1.4.1.11863.6.95.1.3.1.1.1,TPLINK-SFLOW-MIB::tpSflowSamplerPort,OCTET,read-only,,current,,The port number of the switch.
.1.3.6.1.4.1.11863.6.95.1.3.1.1.2,TPLINK-SFLOW-MIB::tpSflowSamplerCollectorId,INTEGER,read-write,,current,,The collector ID.
.1.3.6.1.4.1.11863.6.95.1.3.1.1.3,TPLINK-SFLOW-MIB::tpSflowSamplerIngRate,INTEGER,read-write,,current,,The ratio of ingress packets to the samples generated(Range:0, 1024-65535).
.1.3.6.1.4.1.11863.6.95.1.3.1.1.4,TPLINK-SFLOW-MIB::tpSflowSamplerEgRate,INTEGER,read-write,,current,,The ratio of egress packets to the samples generated(Range:0, 1024-65535).
.1.3.6.1.4.1.11863.6.95.1.3.1.1.5,TPLINK-SFLOW-MIB::tpSflowSamplerMaxHeader,INTEGER,read-write,,current,,The maximum number of bytes that should be sampled.
.1.3.6.1.4.1.11863.6.95.1.3.1.1.6,TPLINK-SFLOW-MIB::tpSflowSamplerPortLag,OCTET,read-only,,current,,The LAG number which the port belongs to.
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
